Finding your suitable log splitter cylinder is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best log splitter cylinder including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. 5"x24" Hydraulic Log Splitter Cylinder, 3500PSI, Double Acting
Description
All welded design Direct replacement for TSC Husky, SplitMaster, Oregon, SpeeCo and many others Double acting Re-buildable (seals can be replaced) 2" Chrome rod with 9/16" mounting hole for wedge mounting/Rod end is machined to 1-3/4" to fit wedge Double mounting clevis design to accept 1-1/8" 24" stroke 5" diameter bore 1/2" NPT hydraulic ports 3500 maximum operating pressure Painted black 1-1/8" Clevis mounting holes2. HYDROWORKS Double Acting Tie Rod Hydraulic Cylinder, 2500 PSI (Kick Off Control Valve 30 GPM)
Feature
Constructed of high tensile strength gray cast ironMax. operating pressure 3500 PSI, built-in relief valve preset at 2250 PSI
Spool action is spring center/hydraulic kick-off
Max. flow of 30 GPM
Kick-off pressure is non-adjustable, preset at 800 PSI
Description
New Hydroworks Log Splitter Kick Off Control Valve, 30 GPM Built-in adjustable relief valve; Hard chrome plated spool; Maximum tank pressure: 500 PSI; Maximum operating temperature: 180F degree; Recommended system filtration: 10 micron; Maximum operating pressure: 3500 PSI; Spool action is spring center/hydraulic kick-off Built-in relief valve preset at 2250 PSI; Handle can be installed in "up" or "down" position.3. 4"x24" Hydraulic Log Splitter Cylinder, 3500PSI, Double Acting
Description
All welded design Direct replacement for TSC Husky, SplitMaster, Oregon, SpeeCo and many others Double acting Re-buildable (seals can be replaced) 1-3/4" Chrome rod with 9/16" mounting hole for wedge mounting Double mounting clevis design to accept 1-1/8" 24" stroke 4" diameter bore 1/2" NPT hydraulic ports 3500 maximum operating pressure Painted black 1-1/8" Clevis mounting holes4. 4.5"x24" Hydraulic Log Splitter Cylinder, 3500PSI, Double Acting
Description
All welded design Direct replacement for TSC Husky, SplitMaster, Oregon, SpeeCo and many others Double acting Re-buildable (seals can be replaced) 1-3/4" Chrome rod with 9/16" mounting hole for wedge mounting Double mounting clevis design to accept 1-1/8" 24" stroke 4-1/2" diameter bore 1/2" NPT hydraulic ports 3500 maximum operating pressure Painted black 1-1/8" Clevis mounting holes5. NorthStar Log Splitter Cylinder Anchor Block - With 1 1/4in. Holes
Feature
Material: SteelDimensions (in.): 6 x 4 x 1/2
1 1/4in Holes
Description
Use This NorthStar Log Splitter Cylinder Anchor Block to mount rear end of cylinder on frame. Can be welded or bolted on. Application: Anchor block, Material: Steel, Base Dimensions (in.): 6 x 4 x 1/26. Tie Rod Style Hydraulic Cylinder 4.5" Bore 24" Stroke Log Splitter Replacement
Feature
Building an attachment? Save time an money using a Titan cylinder.Replace an old cylinder saving your attachment from the scrap yard.
Rated to handle a continuous load of 3,000 PSI.
Sealed ports from the factory means this cylinder is ready to be plugged into your attachment.
Weight: 77 LBS - Bore: 4.5" - Stroke: 24.0" - Rod diameter: 1.75"
Description
The Titan Hydraulic Cylinder delivers the power you need to run your hydraulic attachments!Rated to handle continuous loads of 3000 PSI, this heavy duty cylinder is great for replacing cylinders, or even for building your own attachments- versatility is the name of the game.
Features:
- Building an attachment? Save time and money using a Titan cylinder.
- Replace an old cylinder, saving your attachment from the scrap yard.
- Rated to handle a continuous load of 3,000 PSI.
- Pressure tested with ports sealed from the factory.
- Double acting cylinder
Specifications:
- Weight: 77 lb
- Bore: 4.5"
- Stroke: 24"
- Rod diameter: 1.75"
- Pin to Pin: 34.5"
- Port to Port: 25.5"
- Rod length extended: 31"
- Rod length retracted: 1"
- Overall length extended: 66.75"
- Overall length retracted: 36.75"
- Top Pin inside diameter: 1 1/8"
- Bottom Pin outside diameter: 1/2"
- Port size: 11/16" (17mm)
- Working pressure: 3,000 PSI
7. 918-0769A Log Splitter Hyd. Cylinder w/ Clevis Mount 4" Bore x 24" Stroke for MTD
Feature
4 Diameter Bore x 24 Stroke 3500 Maximum Operating Pressure1/2" NPT Hydraulic Ports 1-1/8" Clevis Mounting Holes
1-3/4" Rod with 9/16" Mounting Hole for Wedge Mounting
Double Mounting Clevis Design to Accept 1-1/8"
Replaces Part Number: HYI40-1043, 718-0769, 918-0769A
Description
One New Aftermarket Replacement 3500 PSI Double Action Hydraulic Wood LogSplitter Cylinder8. HYDROWORKS Double Acting Tie Rod Hydraulic Cylinder, 2500 PSI (4" Bore/ 24" Stroke)
Feature
Ductile iron components provide excellent ductility and higher impactPolyurethane u-cup double lip provides positive seal
High strength steel piston rod with hard chrome plated and precision ground & polished
3000PSI model is designed to withstand shock loads of up to 6000PSI
Passed 100 hours salt spray test
Description
This is the Double Acting Welded Hydraulic Cylinder 4" Bore 24" Stroke for Log Splitter, 3000 PSI. It weighs 62 pounds and has the package dimension of 7.5 x 7.5 x 36 inches.9. Prince Manufacturing CC010386 Side Ported Hydraulic Log Splitter Cylinder, 14.4 Tons, 1.75" Piston Rod
Feature
Extend Speed at 28gpms is 11.2 inches per second. Retract Speed at 28gpms is 14.8 inches per second is achieved by the use of the large chrome plated piston rodSide Ported - Extend and Retract Ports are large # 10 SAE ports to help exhaust oil quickly while retracting the cylinder
14.4 tons of push force at 3000psi to tackle the toughest logs
A 1.25 inch harden pin and clips are included for use on the base end clevis. Base end clevis inside ear width is 1.13 inches and throat depth is 1.75 inches. Rod end is a cross tube mount, 1.25 inch pin hole size that is 1.75 inches wide
The piston seal is a crown seal and includes a piston bearing ring, gland seal is loaded urethane u-cup and pressed in wiper to provide years of reliable service
Description
Side Ported, 3.5 inch bore, 24 stroke, 32.875 retract, 1.75 rod, 3000psi, chrome plated rod, 1.25 pin holes. This is a double acting welded hydraulic cylinder ideal for log splitter applications. Painted gloss black with Prince's aircraft quality two part chemical cure polyester urethane paint. Will not fade and will out perform powder coating for the life of the cylinder. This high quality log splitter cylinder is commonly used with the following Prince Manufacturing Corporation valves: LS-3000-1, LS-3000-1-10, LS-3000-1-12, LS-3000-1-20-20, LS-3000-1-25, LS-3000-2, LS-3000-2-10, LS-3000-6, LS-3000-7, LS-3010-1, LS-3010-1-18, LS-3010-1-20.5, LS-3010-2, LS-3030-1, LS-3030-1-18, LS-3030-2, LS-3030-2-25, LS-3040-1, LS-3040-1-25, LS-3040-1-27, LS-3040-2, LS-3060-1, LS-3060-2, LS-3060-7, LS-3310-1, LSR-3060-3, RD522MMEE5A1A1, RD522MMEE5A4B1, RD522MMEE5A4B2, RD523MMEE5A1A1, RD523MMEE5A4B1, RD523MMEE5A4C1, RD525MMEE5A1A1, RD525MMEE5A4B1, RD526MMEE5A4B1, RD525MMEE5A4F1, RD526MMEE5A1A1, RD526MMEE5B2B1, RD525MMEE5B2B1, RD523MMEE5A4C1E, RD525MMEE5A4B1F, RD529MMEE1A4D1, RD51, RD52, RD53 Series Mono Block valves.10. 24" Welded Log Splitter Cylinder - 3/4" Work Ports
Feature
24" Welded Log Splitter CylinderStroke 24 inch
Bore (ID) 5 inch
Rod (OD) 2 inch
Work Ports 3/4 inch NPT