If you looking for arduino board prototype then you are right place. We are searching for the best arduino board prototype on the market and analyze these products to provide you the best choice.
Reviews
1. ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits
Feature
32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects
4 mounting holes at the corners of the board are very convenient for installing them together.
Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects
High quality of durable glass fiber -FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board
Description
Come to meet Elegoo Double Sided Porotype board which is widely used among electronic experiments and point-to-point DIY soldering projects. With the perfect designed pre-tined holes on the board you can easily install any sensors and components you need. The high quality of glass fiber material and the great durability of the board can always meet you requirements in various situation.Product Specification:
- Dimension: 4x6/ 3x7/ 5x7/ 2x8/ 7x9 CM
- Quantity: 32 pieces in total of 5 different sizes
- Thickness: about 1.6mm
- Material: Great quality of glass fiber FR4
- Color: Green basic, silver tone
- Hole-pitch: 2.54 mm/ 0.1 inches
- Hole-diameter: 1 mm/ 0.04 inches
Package List:
- 6pcs 4X6CM double-sided PCB board with 280 holes
- 10pcs 3X7CM double-sided PCB board with 240 holes
- 7pcs 5X7CM double-sided PCB board with 432 holes
- 7pcs 2 X 8CM double-sided PCB board with 168 holes
- 2pcs 7 X 9CM double-sided PCB board with 806 holes
2. Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB Diy Kit for Arduino (Pack of 5PCS) GK1007
Feature
This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in placeBreadboard PCB for any type Raspberry Pi GPIO
Gold plated finish prevents oxidation, High quality Gold finish for easy soldering
All holes are through-plated for strength
Pack of 5PCS
Description
This is Solderable Breadboard. A bare PCB that is the exact size as our regular breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in placeBreadboard PCB for any type Raspberry Pi GPIO
Gold plated finish prevents oxidation, High quality Gold finish for easy soldering
All holes are through-plated for strength
Pack of 5PCS
3. Electronics-Salon Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3.
Feature
Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3.FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm.
Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm.
Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.
Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ).
Description
Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3.
The Kit include Prototype PCB, Terminal Blocks, Female Header Sockets.
Unassembled, variety mount methods, you can make flexible use.
PCB:
FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm.
Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm.
Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.
Terminal Block:
Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs).
Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.
Female Header Socket:
Pitch 0.1"/2.54mm, pin length 15mm / 0.59"
Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs.
Note: the item not include Arduino UNO module.
If you want buy these tall header socket connectors, you can visit my store.
4. Elegoo EL-CP-003 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks
Feature
630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power railsWhite ABS plastic body with black printed legend. Color legend on distribution strips
With self-adhesive tape on the back, make it easy to stick on the Arduino prototype shield
Packing in a paper box
We have always cared about the customer experience and improve the product function details
Description
We have the manufacture factory,
making productions and selling by ourselves.
So we can control the quality of our productions by ourselves for you.
Wed like to receive your valuable suggestions for our products and make your idea come true.
830 tie points total. 200 in 2 power rails, 630 in a 30 x 10 matrix
White plastic, with black legend. Colored power rails
For wires 21 to 26 AWG
2-sided peelable adhesive tape
Component listing:
3pcs 830 tie-points breadboard
5. Alloet 5Pcs Mini Breadboard Prototyping Prototype Shield ProtoShield for Arduino UNO
Feature
Auto recovery Input range:DC 8~22v.Output voltage:DC 5V.
Output current:3A.
Output power:15W.
Total Cable length:Approx. 135cm.
Description
Specification:
100% Brand new and high quality.
Working temperature:-40 -80 .
All epoxy sealed containers with Waterproof Housing Light compact, convenient to use and transport Non-isolated,synchronous rectification High efficiency:>94%
Reliable, low heat dissipation Low power consumption, high conversion rate With reverse connect protection, output short circuit protection, over current protection,
over temperature protection, stable performance.
Package:
1x Car Charger Regulator Converter
6. WINGONEER Prototype Screw / Terminal Block Shield Board Kit For Arduino MEGA 2560 R3 DIY
Feature
PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.
Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs.
Note: This is not original Arduino product.it only a substitute accessories from WINGONEER
Description
WINGONEER trademark Reg.NO:4747611WINGONEER Prototype Screw / Terminal Block Shield Board Kit For ArduinoMEGA-2560 R3
The Kit include Prototype PCB, Terminal Blocks, Female Header Sockets.
PCB:
FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm.
Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm.
Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.
Terminal Block:
Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ).
Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.
Female Header Socket:
Pitch 0.1"/2.54mm, pin length 15mm / 0.59"
Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs.
Note: This is not original Arduino product. It only a substitute accessories from WINGONEER
Package included:
1x WINGONEER PCB Board
7. WINGONEER Prototype Screw / Terminal Block Shield Board Kit For Arduino MEGA 2560 R3 DIY
Feature
Unassembled, variety mount methods, you can make flexible use.PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.
Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.
Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs.
Note: This is not original Arduino product.it only a substitute accessories from WINGONEER
Description
WINGONEER trademark Reg.NO:4747611WINGONEER Prototype Screw / Terminal Block Shield Board Kit For ArduinoMEGA-2560 R3
The Kit include Prototype PCB, Terminal Blocks, Female Header Sockets.
Unassembled, variety mount methods, you can make flexible use.
PCB:
FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm.
Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm.
Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.
Terminal Block:
Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ).
Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.
Female Header Socket:
Pitch 0.1"/2.54mm, pin length 15mm / 0.59"
Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs.
Note: This is not original Arduino product. It only a substitute accessories from WINGONEER
Package included:
1x WINGONEER PCB Board
8. Paxcoo 62Pcs PCB Board Kit Includes 32Pcs Double Sided Prototype Boards, 20Pcs Header Connector and 10 Pcs Screw Terminal Blocks
Feature
Quantity - Paxcoo 62 pcs PCB board set comes with 32 pcs protoboard, 20pcs male and female header connectors and 10 pcs screw terminal blocks that is enough for DIY soldering, prototyping, arduino boards and other small projects or engineering projects5 DIFFERENT SIZES - The protoboard includes 2x8/ 3x7/ 4x6/ 5x7/ 6x8 variety sizes breadboard. All pcb boards had smoothly sheared edges and cleanly drilled corner mounting holes for easy mounting so you can always have the right size board for any project
BOTH SIDE PCB BOARD - The pcb board is well manufactured, double sided design and letter-indicators representing each column of holes on one edge, which is workable (solder pads, tinned holes) and marked for convenience using
COMPATIBLE FOR - These breadboard pad fit for anyone doing their DIY project. They were very nice and all mounting holes drilled, you can just design, place components and solder either side
NECESSARY DIY ACCESSORIES - These breadboard set also come with 20 pieces 40 Pin 2.54mm male and female header connector and 10 pcs srew terminal blocks so you donot need to purchased again and can be ready to start your DIY project
Description
Features:
The PAXCOO breadboard is designed as all basic green body with soldered holes which is widely used in electronic experiments and point-to-point DIY soldering projects. With the perfect designed pre-tined holes on the board you can easily install any sensors and components you need. The high quality of glass fiber material and a nice variety of sizes for the price that will be a good choice for you.
PCB Boards:
- Dimension: 2x8cm, 3x7cm, 4x6cm, 5x7cm, 6x8cm
- Material: glass fiber
- Color: green basic, silver tone
- Thickness: about 1.6mm
- Hole-pitch: 2.54 mm/ 0.1 inches
- Hole-diameter: 1 mm/ 0.04 inches
Male and Female Header Connector:
- Pitch: 2.54mm, number of pins: 40pin.
- Type of row: single row, type of connector: straight.
- Great tool for Arduino proto shield.
Screw Terminal Block:
- Pitch: 5.08mm, 5.08-301-2P.
- Rated voltage: 300V, rated current: 16A.
Package included:
- 10pcs 2X8CM prototype PCB universal board
- 10pcs 3 X 7CM prototype PCB universal board
- 5pcs 4 X 6CM prototype PCB universal board
- 5pcs 5 X 7CM prototype PCB universal board
- 2pcs 6 X 8CM prototype PCB universal board
- 10pcs male header connectors
- 10pcs female header connectors
- 10pcs 10 pieces screw terminal blocks
9. Aideepen Proto Screw Shield Assembled Terminal Point Prototype Expansion Board Opening Source Reset Button PCB Bareboard D13 Universal LED for Arduino
Feature
Arduino Proto Screw shields Assembled prototype terminal expansion boardProvide terminal for the Arduino IO, convenient port connection
With Proto shields, can be used as a prototype extension plate in the middle
Prototype extending double-sided PCB via links, positive sides can be welded components
IO have SMT solder on the back, easy to fly line connection
Description
Arduino Proto Screw shields Assembled prototype terminal expansion boardProvide terminal for the Arduino IO, convenient port connection
3.81 terminal quality, reliable, convenient and durable
With Proto shields, can be used as a prototype extension plate in the middle
Prototype extending double-sided PCB via links, positive sides can be welded components
IO have SMT solder on the back, easy to fly line connection
Can be placed in the middle of the small bread plate, convenient experimental extension
