If you looking for velcro tape 2×15 then you are right place. We are searching for the best velcro tape 2×15 on the market and analyze these products to provide you the best choice.
Reviews
1. VELCRO Brand - Sew On Fasteners - 15' x 2" Tape - Black
Feature
NOTICE: Amazon is a trusted seller of Velcro Brand products. Warranty will not be valid on any items purchased through third-party sellers.Easy to sew and easy to fasten for a secure hold
An adjustable alternative to snaps, buttons, zippers, hooks & eyes
Washable and dry cleanable. (Close fastener when laundering.)
Velcro Brand offers a variety of sew on fasteners for all your uses
Description
VELCRO Brand Sew On fasteners offer convenient, long-lasting closures for clothing, accessories and home decorating. Hand or machine stitch around edge of the tape and backstitch to secure. Key uses: apparel, decorative pillow covers, drapery ties, clothing customization, athletic gear customization, soft electronics cases, handbag closures, and pet accessories.2. JVCC FELT-06 Polyester Felt Tape: 1 in. x 15 ft. (Black)
Feature
Carrier/Backing: polyester needled felt. Adhesive: synthetic rubber.Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner)
Adhesion: 130 ounces per inch (to stainless steel test panel). Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse).
Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum).
Release Liner: paper (reverse wound)
Description
JVCC FELT-06 Polyester Felt Tape is a 1mm thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops and for other general use vibration dampening. Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-06 hides seams being photographed, and is used for applying a clean, dark edge to platforms, flats and portals. Can also be used to create matte borders or edges and to line display and jewelry cases. Great for padding furniture on dark stained wood floors to prevent scratches.
Application InstructionsOn many of the adhesive felt products the rolls will have an approximately 2 inch to 4 inch leader of double-sided film tape applied to the release liner before the felt material starts. We recommend you either cut a small piece of felt off at the beginning of the roll with a pair of scissors to start, or peel the double-sided film tape off of the release liner to use as a way to begin applying the felt (try not to pull the double-sided film tape off of the felt backing though). It is sometimes easier to try to peel the corner of the felt away from the release liner (instead of the release liner away from the felt) since you may end up splitting the release liner when you do it that way.
Technical Information
Core: 3 inch diameterBacking/Carrier: polyester needled felt
Adhesive: synthetic rubber
Release Liner: paper (reverse wound)
Certifications: meets RoHS Directive 2011/65/EU
Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner)
Adhesion: 130 ounces per inch (to stainless steel test panel)
Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse)
Application Temperature: 60F (minimum)
Service/Operating
3. VELCRO Brand - Industrial Strength - 2" Wide Tape, 15' - White
Feature
The original Hook and Loop Fastener. Easy to use, durable and strong! Great for Heavy Duty applicationsProfessional grade adhesive. Unmatched versatility. Ultimate tool for organization, mounting, hanging, storing and much more. Our tape will adhere to almost all surfaces! It is even water resistant. Use it indoor and outdoor.
This Industrial Strength Sticky Back tape is designed for tough applications
Stronger adhesive, longer lasting and more durable than other brands
Perfect for around the house and garage! Unlimited possibilities for organization, mounting and crafts/crafting
Description
VELCRO Brand Industrial Strength tapes, coins, and strips offer significantly more holding power than everydayVELCRO Brand Sticky Back fasteners. They feature a molded plastic hook and a heavy duty, water-resistant adhesive for superior holding power on smooth surfaces, including plastic, indoors and outdoors.4. JVCC FELT-06 Polyester Felt Tape: 3/4 in. x 15 ft. (Black)
Feature
Carrier/Backing: polyester needled felt. Adhesive: synthetic rubber.Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner)
Adhesion: 130 ounces per inch (to stainless steel test panel). Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse).
Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum).
Release Liner: paper (reverse wound)
Description
JVCC FELT-06 Polyester Felt Tape is a 1mm thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops and for other general use vibration dampening. Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-06 hides seams being photographed, and is used for applying a clean, dark edge to platforms, flats and portals. Can also be used to create matte borders or edges and to line display and jewelry cases. Great for padding furniture on dark stained wood floors to prevent scratches.
Application InstructionsOn many of the adhesive felt products the rolls will have an approximately 2 inch to 4 inch leader of double-sided film tape applied to the release liner before the felt material starts. We recommend you either cut a small piece of felt off at the beginning of the roll with a pair of scissors to start, or peel the double-sided film tape off of the release liner to use as a way to begin applying the felt (try not to pull the double-sided film tape off of the felt backing though). It is sometimes easier to try to peel the corner of the felt away from the release liner (instead of the release liner away from the felt) since you may end up splitting the release liner when you do it that way.
Technical Information
Core: 3 inch diameterBacking/Carrier: polyester needled felt
Adhesive: synthetic rubber
Release Liner: paper (reverse wound)
Certifications: meets RoHS Directive 2011/65/EU
Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner)
Adhesion: 130 ounces per inch (to stainless steel test panel)
Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse)
Application Temperature: 60F (minimum)
Service/Operating
5. JVCC FELT-06 Polyester Felt Tape: 2 in. x 15 ft. (Black)
Feature
Carrier/Backing: polyester needled felt. Adhesive: synthetic rubber.Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner)
Adhesion: 130 ounces per inch (to stainless steel test panel). Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse).
Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum).
Release Liner: paper (reverse wound)
Description
JVCC FELT-06 Polyester Felt Tape is a 1mm thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops and for other general use vibration dampening. Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-06 hides seams being photographed, and is used for applying a clean, dark edge to platforms, flats and portals. Can also be used to create matte borders or edges and to line display and jewelry cases. Great for padding furniture on dark stained wood floors to prevent scratches.
Application InstructionsOn many of the adhesive felt products the rolls will have an approximately 2 inch to 4 inch leader of double-sided film tape applied to the release liner before the felt material starts. We recommend you either cut a small piece of felt off at the beginning of the roll with a pair of scissors to start, or peel the double-sided film tape off of the release liner to use as a way to begin applying the felt (try not to pull the double-sided film tape off of the felt backing though). It is sometimes easier to try to peel the corner of the felt away from the release liner (instead of the release liner away from the felt) since you may end up splitting the release liner when you do it that way.
Technical Information
Core: 3 inch diameterBacking/Carrier: polyester needled felt
Adhesive: synthetic rubber
Release Liner: paper (reverse wound)
Certifications: meets RoHS Directive 2011/65/EU
Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner)
Adhesion: 130 ounces per inch (to stainless steel test panel)
Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse)
Application Temperature: 60F (minimum)
Service/Operating
6. Velcro - Sticky-Back Hook and Loop Fastener Tape with Dispenser, 3/4 x 15 ft. Roll, White - Sold As 2 Rolls - Press-on fasteners deliver strong holding power.
Feature
Press-on fasteners deliver strong holding power.Simple peel and stick application.
For smooth surfaces.
Includes one 3/4" x 15 ft. roll and dispenser box.
Tape Rolls in Dispenser Bo
Description
Sticky-Back Hook and Loop Fastener Tape with Dispenser, 3/4 x 15 ft. Roll, White7. Velcro : Industrial Strength Sticky-Back Hook & Loop Fasteners, 2" x 15-ft. Roll, Black -:- Sold as 2 Packs of - 1 - / - Total of 2 Each
Feature
Sold as .: 2 Packs of - 1 - / - Total of 2Manufactured by.: Velcro
Description
Velcro : Industrial Strength Sticky-Back Hook & Loop Fasteners, 2" x 15-ft. Roll, Black50% stronger than standard hook and loop fasteners. 2" width offers firmer positioning and waterproof adhesion, even when submerged. Sticks to most surfaces, including plastic. Excellent for indoor or outdoor use. Global Product Type: Hook & Loop Fasteners-Industrial Strength Self-Adhesive Strips; Hook and Loop Fastener Type: Industrial Strength Self-Adhesive Strips; Tape Pad Size: 2" x 15 ft.; Color(s): Black.:
Manufactured by.: Velcro
8. FindTape HL74-R Adhesive-Backed Loop-Side Only Rolls: 2 in. x 15 ft. (Black) / loop-side only
Feature
FindTape HL74-R hook and loop rolls are sold separately - be sure to order the correct side (either hook side or loop side) for your application. By selling the rolls separately you are able to purchase more of one side or the other.FindTape HL74-R Adhesive-Backed Hook-N-Loop Rolls is a pressure sensitive hook-n-loop nylon fastener closure system manufactured with woven nylon yarns and bound by an acrylic binder coating. FindTape HL-74-R comes on a clear polyester liner for easy release and is coated with a permanent, rubber based adhesive.
Proven to work with many materials including corrugated, chipboard, metal, glass and more. This product is a good choice for packaging and applications with changing messages.
Product applications for FindTape HL-74-R include conference signage and exhibits, computer cord wrap, product displays and graphic panels, organize and hang tools and craft supplies, clothing - in place of zippers, buttons or snaps, secure rugs to the floor and cushions to seats, and more.
FindTape HL-74-R Adhesive-Backed Hook-N-Loop Rolls are available in black or white, 1/2 in., 3/4 in, 1 in., or 2 in. widths by 15-foot (5 yards) or 75-foot (25 yards) lengths - whatever your project or application requirements, we have the right hook and loop product for you.
Description
FindTape HL74-R Adhesive-Backed Hook-N-Loop Rolls is a pressure sensitive hook-n-loop nylon fastener closure system manufactured with woven nylon yarns and bound by an acrylic binder coating. The hook side is rougher and filled with very tiny hooks. The loop side is less course with clusters of hairy loops. When the two sides are pressed together, the hooks catch the loops and bind the strips/pieces together. The strips/pieces are easily separated by pulling or peeling them apart.
FindTape HL-74-R Adhesive-Backed Hook-N-Loop comes on a clear polyester liner for easy release and is coated with a permanent, rubber based adhesive. FindTape HL-74-R is proven to work with many materials including corrugated, chipboard, metal, glass and more. This product is a good choice for packaging and applications with changing messages. The rolls are available in black or white, 1/2 in., 3/4 in., 1 in., or 2 in. widths by 15-foot (5 yards) or 75-foot (25 yards) lengths - whatever your project or application requirements, we have the right hook and loop product for you.
Technical Information
Backing/Carrier: nylonAdhesive: rubber
Release Liner: clear polyester film
Thickness: 84 mils (carrier, adhesive) 9 mils (adhesive) 74 mils (carrier) 4 mils (liner)
Adhesion: 90 ounces per inch (to stainless steel test panel)
Application Temperature: 65F to 100F
Service/Operating Temperature: -5F to 150F
