When you want to find edge banding machine, you may need to consider between many choices. Finding the best edge banding machine is not an easy task. In this post, we create a very short list about top 10 the best edge banding machine for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 edge banding machine:
Reviews
1. Edge Banding Machine
Feature
Electronically controlled heating element is infinitely adjustableRear-mounted on/off switch and top-mounted heat control dial allow use of a wider variety of edge-banding materials.
Built-in cut-off knife has a palm-strike knob.
Light, durable construction and adjustable, non-skid rubber feet.
Maximum material thickness is 2''.
Description
Discover why the pros use this edge bander! Just drop in a roll of hot-melt adhesive-backed edge banding, slide your piece along the fence, and your edge is perfectly surfaced. One strike to the on-board veneer cutter and you're ready for the next piece. Laminate-covered table is 27" by 7-1/2". All fences and guides adjust using the same Allen wrench. 120 volts, 1500 watts.2. Maksiwa Portable Edgebander
Feature
Tape thickness: 0.3mm to 2mmMaximum tape width: 3" (80mm)
Feeder speed: 5.5 m/min
Power: 110V, 1,500 watts
Net weight: 114 lbs.
Description
The Maksiwa CBC.E Portable Edgebander is designed for the discerning woodworker that is looking for convenience, portability, and affordability. This unit features retractable legs and feet, which make for easy portability and transportation. The CBC.E uses a hot glue process for adhering edge banding such as PVC, ABS, paper and wood that do not have a glue backing. This unit utilizes edge banding with a maximum tape height of 3" (80 mm) and a tape thickness of 0.3mm to 2mm. The integrated manual cutter offers precise cutting of the tape. With a digital control temperature panel and glue pot with the capacity of 1.5 pounds (700 grams), this edgebander is a must-have for any cabinet shop. The Maksiwa CBC.E is easy to assemble, heats up in 15 minutes, and is easy to use. A spiral glue bar raises the glue from the glue pot and flows back down, similar to a fondue fountain. The electronic power panel consists of a master on/off switch, hands-free emergency shut-off switch, glue pot on/off switch, feeder switch and digital thermostat. The digital thermostat panel is pre-set at the factory to 170 Celsius and is easily adjustable from 120 to 220 Celsius, depending on your glue choice. Maksiwa recommends glues that work in the range of 160 up to 190 Celsius. Adjustments for height and width of edge tape can be made easily. There is also an adjustment for glue flow rate. Safety features include an emergency button, which will instantly shut down all machine controls, and a feeder switch, which activates the feeder (rubber and glue axis). This switch will only activate the glue bar after confirming glue reaches a pliable state. Minimal cleaning and maintenance are required. This unit offers a one-year manufacturers warranty.3. Grizzly G7910 Hand Held Edge Bander
Feature
This portable edge bander is the perfect answer for shops doing custom and on site work bands straight and shaped pieces and sets up in minutes adjureDouble insulated 1 500 w
Max banding width 2-Inch
Description
This portable edge bender is the perfect answer for shops doing custom and on site work. bands straight and shaped pieces and sets up in minutes. adjustable clamping pressure ensures precision work and stability. for use with pre-glued pic melamine and wood veneer.4. Woodtek 834842, Machinery, Edgebanding, Portable Edge Bander
Feature
Portable edge bander can be easily transported to jobsites.Description
Portable edge bander can be easily transported to jobsites. Light enough to move easily, the Woodtek benchtop edgebander has features found on much larger units: Steinel HL2000P electronically controlled, double insulated heat element. Top mounted 200 to 1,100 F. heat control allows application of a variety of edgebanding materials, such as wood or polyester, to many different substrates. 3/4" to 2" material capacity. Built in cut off knife has palm strike knob for quick, clean cuts. 27" x 7-1/2" laminate covered table. Fences and guides adjust using the same hex wrench. 110V; UL listed. 27"W x 27"L x 10"H overall. Weighs 30 lbs. Imported.5. Maksiwa Edgebanding Trimmer
Feature
Maximum workpiece height: 2-3/8".Table length: 39". Table Width: 6"-16".
Motor: 110V, 550 Watts.
Trimmer speed: 32,000 RPM.
Weight: 41.9 lbs.
Description
This Edge Banding Trimmer is the perfect companion to Maksiwas popular Edgebander. Manually feeding a banded panel through the unit will produce a horizontal cut, a vertical cut and a scraping procedure all in one step. Simply turn the board over, and the second pass will complete the finished edge. The benchtop Edge Banding Trimmer will work on PVC, ABS, paper and wood edge banding. At less than 42 pounds, the portability adds to the versatility of this must-have machine. With the adjustable fence, you can widen the stance from 6" to 16". This unit can easily be secured to any workbench table with the supplied clamps. The powered router/trimmer is cradled in the swinging support and is gravity fed to the work surface, driving a 1/4" rounded bearing bit. The scraper block finalizes the cut with a slightly rounded contour to ensure a professional, smooth finish. The cutting area includes a transparent polycarbonate cover, which serves as a safety device while also forming a convenient dust extraction point that can be connected to all popular vacuum systems to help keep your workstation clean and safe. The cover is fully adjustable and securely held by two rare-earth magnets, allowing a workpiece thickness up to 2-3/8".6. QST 2 Pcs/Set Manual Edge Banding Machine Trimming Device Block Device Wood Double Edge Head and Tail Trimmer For Carpenter PVC Binding Strip Hand Tools
Feature
Made of high-quality hardened steel and it can be easily replaced when worn out.Cuts on both sides smoothly. Cutting range from 1/2-Inch to 1-Inch.
First cutter will cut straight, while the second one can be adjusted for a tapering cut.
Description
Cuts on both sides smoothly. Cutting range from 1/2-Inch to 1-Inch.
First cutter will cut straight, while the second one can be adjusted for a tapering cut.
Made of high-quality hardened steel and it can be easily replaced when worn out.
7. Woodworking JBD80 Portable Edge Bander Manual edge banding machine Wood Working Machinery Gluing Machine
Description
The product usually takes 7--13 business days to arrive to your hand after your order is confirmedProduct Description
Feature:
1.Flexible, Easy to operate
2.energy-saving,enduring
3.Stable performance
Technical Datas
Specification:
Model: JBD80
Feeding Speed: 5m/min
Banding Thickness: 0.3-3.0mm
Min Edge Diameter: 40mm
Banding Width: 10-45mm
Sol tank volume: 200G
Workpiece shape: Straight edge and curved edge
Edge Glue: Single glue cover
Temperature: 120~180
Motor Power: 15W
Total Power: 765W
Power Supply: 220V/50Hz (110V can be customize)
Net Weight: 9kg
Gross Weight: 14kg
Machine Size: 380*330*380mm
Package Size: 375*300*440mm
NOTE:
we will send the product to you as soon as possible
If you have any questions , please feel free to contact us
8. Festool 574609 KA 65 CONTURO Portable Edge Bander
Feature
Inexpensive compared to alternatives like stationary edge banding machinesCapable of edge banding curves, circles, convex and concave radii and inside corners
Electronically controlled precision glue distribution system for maximum adhesion
Description
With the new CONTURO Edge Bander, it's just just as easy to apply edge banding on the job site as it is in the shop. Even if you have a large stationary edge banding machine, the CONTURO can complement your edge banding process by giving you a way to work with radii, circular pieces, bevels and small pieces. The CONTURO's offers exceptional ergonomic design, including dual speeds and a unique patented hot melt glue adhesive system. There's no risk of burns because the glue system is thermally isolated. Ditch the iron or hot air gun to and gain the benefits of a dedicated edge banding machine without the cost associated with stationary equipment. .9. 2 Pcs/Set Double Edge Banding Machine Trimming Cutting Device Manual Head and Tail Trimmer Woodworking Tool For Carpenter PVC Binding Strip
Feature
Made of high quality PVC material, solid and not easy to aging, non-slip top surface is easy to operate and durable to use.Fit for edge banding thickness below 0.5mm, width between 15-40mm.
Easily handle special thick plate
Widely used for furniture, cabinet making, decoration and other industries
Fits for various material, such as flexible melamine paper, wood, plastic, PVC, etc.
Description
Material:PlasticDimension: 9.5CM * 4.8CM * 6CM (L * W * H)
Overall dimensions: 13.7CM * 8CM * 8.5CM (L * W * H)
Package include:
1 pcs edge trimmer
1 pcs Head and tail trimmer
10. Birch 3/4" X 250' Roll Preglued, Wood Veneer Edge banding, Iron on with Hot Melt Adhesive, Flexible Wood Tape Sanded to Perfection. Easy Application Wood Edging, Made in USA.
Feature
High Quality Wood veneer edgebandingPre-glued Size 3/4" X 250'
With high quality adhesive and finely sanded to perfection
