How to find the best ramps1.4 12864 for 2022?

We spent many hours on research to finding ramps1.4 12864, reading product features, product specifications for this guide. For those of you who wish to the best ramps1.4 12864, you should not miss this article. ramps1.4 12864 coming in a variety of types but also different price range. The following is the top 9 ramps1.4 12864 by our suggestions:

Product Features Editor's score Go to site
Solu  Ramps1.4 Lcd12864 Intelligent Smart Controller LCD 12864 for Reprap 3d Printer// 3d Printer Ramps1.4 Lcd12864 Intelligent Smart Controller Lcd 12864// Ramps 1.4 Lcd 12864 Intelligent Smart Controller Display Support Sd Card Solu Ramps1.4 Lcd12864 Intelligent Smart Controller LCD 12864 for Reprap 3d Printer// 3d Printer Ramps1.4 Lcd12864 Intelligent Smart Controller Lcd 12864// Ramps 1.4 Lcd 12864 Intelligent Smart Controller Display Support Sd Card
Go to amazon.com
kuman 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits +RAMPS 1.4 + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap K17 kuman 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits +RAMPS 1.4 + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap K17
Go to amazon.com
OSOYOO 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap OSOYOO 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap
Go to amazon.com
3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.4 with Upgraded Mosfet + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap (14 items) 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.4 with Upgraded Mosfet + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap (14 items)
Go to amazon.com
Quimat 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.4 with Upgraded Mosfet + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap Quimat 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.4 with Upgraded Mosfet + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap
Go to amazon.com
WINGONEER 3D Printer Smart Adapter Connector Machine LCD 2004/12864 Module Printers Controller For RAMPS 1.4 WINGONEER 3D Printer Smart Adapter Connector Machine LCD 2004/12864 Module Printers Controller For RAMPS 1.4
Go to amazon.com
WINGONEER 3d Printer Controller Kit Mega 2560 R3 + Ramps 1.4 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino Reprap LK17 WINGONEER 3d Printer Controller Kit Mega 2560 R3 + Ramps 1.4 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino Reprap LK17
Go to amazon.com
HESAI 3D Printer Kit Smart Parts LCD 12864 Display Monitor Motherboard Blue Screen Module for RAMPS 1.4 Controller Control Panel HESAI 3D Printer Kit Smart Parts LCD 12864 Display Monitor Motherboard Blue Screen Module for RAMPS 1.4 Controller Control Panel
Go to amazon.com
KINGPRINT 12864 LCD Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa Arduino KINGPRINT 12864 LCD Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa Arduino
Go to amazon.com
Related posts:

Reviews

1. Solu Ramps1.4 Lcd12864 Intelligent Smart Controller LCD 12864 for Reprap 3d Printer// 3d Printer Ramps1.4 Lcd12864 Intelligent Smart Controller Lcd 12864// Ramps 1.4 Lcd 12864 Intelligent Smart Controller Display Support Sd Card

Feature

Usually, you will get it actually in 9~19 days, If you are in the USA and the item is NOT Fulfilled by Amazon. the item will be sent to you by USPS with shipping information from China. The estimated delivery time offered by Amazon is not the real time. Your patience is highly appreciated. Hope you will receive your item soon and enjoy using it.
RAMPS1.4 LCD12864 LCD 12864 For RepRap 3D printer
RAMPS 1.4 LCD 12864 Intelligent Smart Controller
Smart Controller Display Support SD card
RAMPS1.4

Description

About us (Solu ), Professional factory of circuit boards for Arduino, welcome to our store for more choices with best price. What we pursue is your satisfication of our service, not just for our goods.For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. we will reply you about any question you ask within 24 hours

Specifications:

Large screen: 12864LCD
Module: 9.3 x 8.7 cm (L x W)
Screen: about 3 inch
Cable: 21 x 1.3 cm (L x W)
L type adapter: 6.2 cm (L)
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs
without PC, just with a g-code design stored on the SD card.
Note:
This controller support SD card offline printing.
Package is not included the SD card.

Package Includes :

1pcs12864 LCD
1pcs connector
2pcs FC cable

2. kuman 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits +RAMPS 1.4 + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap K17

Feature

Update High Quality Ramp Board by changing MOSFET: old MOSFET IC Model : PDF55N06 SpecificationVDSS:60V ID:55A New MOSFET IC model: HM60N06 SpecificationVDSS:60V ID:60A HM60N06 current up to 60AMore safety
3D Printer Controller RAMPS 1.4,A4988 Stepper Motor Driver
LCD 12864 Graphic Smart Display Controller
3D Printer Controller 100% compatible with Arduino RepRap
Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents

Description

Product Specs:

(1) Mega 2560 R3
(2) 3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
(3) A4988 Stepper Motor Driver
A4988 is a complete microstepping motor driver with built-in translator for easy operation
(4) LCD 12864 Graphic Smart Display Controller
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
Update High Quality Ramp Board by changing MOSFET: old MOSFET IC Model : PDF55N06 SpecificationVDSS:60V ID:55A New MOSFET IC model: HM60N06 SpecificationVDSS:60V ID:60A HM60N06 current up to 60AMore safety

Package List:

(1) RAMPS 1.4 x 1
(2) Mega 2560 R3 x 1
(3) A4988 Stepper Motor Driver with Heatsink x 5
(4) LCD 12864 Graphic Smart Display Controller x 1
(5) Smart Adapter x 1
(6) Cable x 2
(7) USB Cable x 1

Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.

Note:
1. You just need to connect the computer with Mega 2560 via USB download cable when burning firmware.
2.The chip and circuit may be burnt when the power and motor driver board reversed, so please confirm twice before powering.
3.You just need to power Ramps 1.4 when testing.If you power Mega 2560, the chip will be burnt easily. So please read the introduction carefully and avoid the board being burnt due to the wrong operation.

3. OSOYOO 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap

Feature

3D printer Kit guide: 3D printer Kit guide: http://osoyoo.com/driver/3D%20printer%20instructions.pdf
3D Printer Controller RAMPS 1.4 interfaces an Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion
With LCD 12864, you can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
It is designed to fit the entire electronics needed for a RepRap in one small package for low cost
We are professional factory on making all electronics components based on Arduino and Raspberry Pi. And we also have processional engineer team to offer you tutorials which you can start from beginning. all documents (including code)

Description

3D printer Kit guide: http://osoyoo.com/driver/3D%20printer%20instructions.pdf


Caution:

1) The max power supply for these ramps is 12V and the max watts is about 180W. The max watts for the hotbed is about 100W and the max temperature is just 50 degree Celsius.

2) Do not plug or unplug and wire or module when power is on, do not even touch the board when power is on or your hand has static charge(you can remove static charge by touching metal tap) .

3) Always double check power wire is properly installed. If you do not follow above move, you may damage the control board and your 3D printer.

4) Pls confirm the A4988 driver install correctly on Ramps1.4 board.

5) The endstop pins are Signal-GND-VCC, instead of VCC-Signal-GND like the rest of RepRaps boards. Make sure to wire them correctly. This is done to allow squeezing fatter traces on the printable board.

6) Don't secure Arduino/Ramps with conductive screws through both mounting holes. The screw may cut into the positive trace creating a HIGH current short.

7) Test all electronics thoroughly before placing into service.

8) Do not leave power supplied to electronics unattended, or run machines unattended due to the risk of fire and malfunction.

9) Once you start putting electricity into your RepRap - even at just 12 volts - you have to take basic, common sense precautions to avoid fires. Just in case these fail. test your workshop smoke detector.


Product Specification:

1) Marlin firmware update: Arduino IDE 1.5.X

2) This kit consists of a RAMPS 1.4 shield, an Mega 2560 board, five Stepper drivers and a LCD. It can control up to 5 stepper motors with 1/16 stepping precision and interface

4. 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.4 with Upgraded Mosfet + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap (14 items)

Feature

3D Printer Controller Kit Mega 2560 R3
3D Printer Controller RAMPS 1.4 interfaces an Arduino Mega2560 board. The modular design includes a plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgradeability and expansion
LCD 12864 Graphic Smart Display Controller and the A4988 Stepper Motor Driver
3D Printer Controller 100% compatible with Arduino RepRap
Detailed tutorials including project introduction and source code are provided for free, just contact us by Email

Description

Difference between 2016 and 2017 Version
2016 Old MOSFET IC Model : PDF55N06 VDSS:60V ID:55A
2017 New MOSFET IC model: HM60N06 VDSS:60VID:60A, more durable and safety.

Product Features:
1) Mega 2560 R3
2) 3D Printer Controller RAMPS 1.4 with high-quality MOSFET
Designed to fit the entire electronics needed for a RepRap in one small package for low cost, interface with the powerful Arduino-compatible Mega platform with plenty space for expansion.
3) A4988 Stepper Motor Driver
A complete micro-stepping motor driver with built-in translator for easy operation
4) LCD 12864 Graphic Smart Display Controller
Contains an SD-Card reader, a rotary encoder, and a 128 x 64 dot matrix LCD display. Easy to connect it with your Ramps board using the "smart adapter" included.

Package List:
(1) RAMPS 1.4 x 1
(2) Mega 2560 R3 x 1
(3) A4988 Stepper Motor Driver with Heatsink x 5
(4) LCD 12864 Graphic Smart Display Controller x 1
(5) Smart Adapter x 1
(6) Cable x 2
(7) USB Cable x 1

Caution:
1.Please read the technical parameters of the board carefully before you use it;
2.Only connect the mega2560 board with the computer via USB cable while programming firmware;
3.Reversed connection of the power supply or the motor driver may cause the board burning, please confirm again before power on;
4.Only power on the Ramps 1.4 while testing the product, supply power to the mega2560 board may cause burning the board;
5.Select the appropriate load according to the board voltage/current requirement,if the work current exceeds the load of the board which may cause the board burning.
If you have any questions and need any technical help, please be free to contact us, we will try our best to help you.

5. Quimat 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.4 with Upgraded Mosfet + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap

Feature

3D Printer Controller Kit Mega 2560 R3
3D Printer Controller with new upgraded RAMPS 1.4,high quality MOSFET HM60N06 with up to 60A work current,more durable and safety
LCD 12864 Graphic Smart Display Controller and the A4988 Stepper Motor Driver
3D Printer Controller 100% compatible with Arduino RepRap
Detailed tutorials including project introduction and source code are provided for free, just contact us by Email

Description

Difference between 2016 and 2017 Version
2016 Old MOSFET IC Model : PDF55N06 VDSS:60V ID:55A
2017 New MOSFET IC model : HM60N06 VDSS:60V ID:60A,more durable and safety

Product Features:
1).Mega 2560 R3
2).3D Printer Controller RAMPS 1.4 with high quality MOSFET
Designed to fit the entire electronics needed for a RepRap in one small package for low cost, interface with the powerful Arduino-compatible Mega platform with plenty space for expansion.
3).A4988 Stepper Motor Driver
A complete micro-stepping motor driver with built-in translator for easy operation
4).LCD 12864 Graphic Smart Display Controller
Contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. Easy to connect it with your Ramps board using the "smart adapter" included.

Package List:
RAMPS 1.4 x 1
Mega 2560 R3 x 1
A4988 Stepper Motor Driver with Heatsink x 5
LCD 12864 Graphic Smart Display Controller x 1
Smart Adapter x 1
Cable x 2
USB Cable x 1

Note:
1.Please read the technical parameters of the board carefully before you use it
2.Only connect the mega2560 board with the computer via USB cable while programming firmware;
3.Reversed connection of the power supply or the motor driver may cause the board burning, please confirm again before power on;
4.Only power on the Ramps 1.4 while testing the product, supply power to the mega2560 board may cause burning the board;
5.Select the appropriate load according to the board voltage/current requirement,if the work current exceeds the load of the board which may cause the board burning

Any questions or concerns, please feel free to contact us,we are looking forward to serving you again

6. WINGONEER 3D Printer Smart Adapter Connector Machine LCD 2004/12864 Module Printers Controller For RAMPS 1.4

Feature

This adapter is for RAMPS 1.4 Smart Controller LCD 2004 & LCD 12864
You can easy connect it to your RAMPS 1.4 shield using this smart adapter
After connecting the panel to your RAMPS1.4 shield you can print your 3D designs without PC, just with a G-code design stored on the SD card
Small size, convenient to carry and use
Dual 10 pins for easy connection, great adapter

Description

WINGONEER trademark Reg.NO:4747611

WINGONEER 3D Printer Smart Adapter Connector Machine LCD 2004/12864 Module Printers Controller For RAMPS 1.4

DESCRIPTIONS:
This adapter applies to the smart control panel LCD2004 and LCD12864 of the Ramps1.4 board. You can easily connect the smart control panel to the Ramps1.4 board. When the panel is attached to your Ramps1.4 board, you do not need to print the 3D design via your computer, you can only design it on the SD card that has been stored in the G code.

SPECIFICATIONS:
Type: 3D Printer RAMPS Adapter
Model: RAMPS 1.4
Size: 62*21*19mm
Material: Plastic, Electronic Part
Pin Number:Dual 10Pins

PACKAGE INCLUDES:
1x Adapter

7. WINGONEER 3d Printer Controller Kit Mega 2560 R3 + Ramps 1.4 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino Reprap LK17

Feature

3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS
interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
Mega 2560 compatible with arduino.
LCD 12864 Graphic Smart Display Controller This full graphic Smart Controller contains a SD-Card.
A4988 Stepper Motor Driver A4988 is a complete microstepping motor driver with built-in translator for easy operation.

Description

WINGONEER 3d Printer Controller Kit Mega 2560 R3 + Ramps 1.4 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino Reprap LK17

features :
Update High Quality Ramp Board by changing MOSFET:
Old MOSFET IC Model : PDF55N06 SpecificationVDSS:60V ID:55A
New MOSFET IC model: HM60N06 SpecificationVDSS:60V ID:60A
HM60N06 current up to 60A, More safety

Package List:
1 x RAMPS 1.4
1 x Mega 2560 R3
5 x A4988 Stepper Motor Driver with Heatsink
1 x LCD 12864 Graphic Smart Display Controller
1x Smart Adapter
2 x Cable
1 x USB Cable

8. HESAI 3D Printer Kit Smart Parts LCD 12864 Display Monitor Motherboard Blue Screen Module for RAMPS 1.4 Controller Control Panel

Feature

Using a large screen 12864LCD
With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing
Product comes encoder parameter adjustment can be achieved, and the file selection print
Plug and play on the RAMPS, but need to modify the firmware to support

Description

Specification:

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

Package List:

1x LCD 12864 Smart Controller

1x Smart Adapter

2x FC Cable

9. KINGPRINT 12864 LCD Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa Arduino

Feature

-Using a large screen 12864LCD (3.2'), it can support 8 GB
-With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing
-Product comes encoder parameter adjustment can be achieved, and the file selection print
-Plug and play on the RAMPS, but need to modify the firmware to support
-Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it

Description

12864LCD- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc. LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel.

Conclusion

All above are our suggestions for ramps1.4 12864. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using ramps1.4 12864 with us by comment in this post. Thank you!