Related posts
Feature
4-IN-1 : Multi-scanner stud finder for Wood, Metal, Deep, AC Current. Quickly locates edges and center of wood ,wall studs, metal pipes,wooden beams , joist ,rebar behind walls, floors and ceilings, also indicates the presence of live AC wire .Stud finderdepth of drywall : Detects STUD like wooden beam ,joist in drywall up to 1.2 inches, METAL such as pipe , rebar, aluminum and copper up to 1.57 inches, DEEP mode detects wood and metal parts located particularly deep up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches, measurement accuracy: +/- 1%.
Easy-to-read LCD with graphical display and continuous sound warning reminding you the location of the edges of the studs.Auto power off without any operation after 60 seconds .
Easy-to-use stud detector : Only three buttons ,first select the probe type ,then press and hold the button at the left side of the device till the unit sounds a short beep "BI BI" ,next hold the "PUSH"button and scan horizontally across the object surface. Note: If you can not scan the object from left to right , please try to scan up and down.
Perfect stud sensor for home renovator and decorator. Low battery indication .Including 1 year warranty card . Battery :1x9V batteryNot included.
Description
Description:This is a very cool stud finder for decorate construction and personal using.
Stud Finder Feathers:
- STUD mode: detect wooden beam ,joist in drywall up to 1.2 inches .
- METAL mode: detect metal pipes ,rebars etc up to 1.57 inches .
- DEEP mode: detects wood and metal parts located particularly deep up to 1.77 inches .
- AC mode: detects AC live wire up to 2.36 inches .
- Low battery indicator
- Battery :1x9V batteryNot include
Easy to use Stud Finder Scanner:
Step 1: Power on the device , and choose the scanning mode you want to detect .
Step 2: Place the device flat on wall first. Then press and hold the "PUSH" button at the side of the device , and keep the unit still until calibration is complete(1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared .
Step 3: While still holding on the "PUSH" button ,move the stud finder on the desired surface to scan and detect for studs , metal beams , pipes ,AC wire etc .
Step 4 : When the device detected an object , it will beep continually and a peck shape will also display on the LCD screen .
Trouble shotting :
Insert the battery,but the device can not work
If you changed a new battery and it still didn't work , it maybe the product has not been completely discharged .Please install the battery in reverse direction for 3 seconds , and repeat this twice ,then correct the installation .
It is not sensitive to detect ac
1.The measuring range for alternating current is 85-240 volt , sometimes the alternating current will influenced by environment , humidity or others which will also influence the measuring accuracy .
2.If you know that there are lines in a particularly location, but you can not find them with the sensor in "AC" mode, then use "METAL" mode. Electrical lines may be shielded by metal cladding.