Elitech STC-1000 110V Digital Temperature Controller Centigrade Thermostat w Sensor 2 Relays

Feature

Temperature calibration; Refrigerating control output delay protection.
Auto switch between refrigerating and heating,retrun difference value.
Control temperature by setting the temperature setting value and the difference value.
Alarm when temperature exceeds temperature limit or when sensor error..
Accuracy: 1C (-50~70C)

Description

Elitech is the origin manufacturer of STC1000 from 2005. This is the only official Amazon store sold STC1000 with the right wire diagram.

Specification and Size:
1.Front panel size75(L)34.5(W)mm;
2.Mounting size:71(L)29(W)mm;
3.Product size75(L)34.5(W)85(D)mm;
4.sensor length2minclude the probe.

Technical Parameters:
1. Temperature measuring range: -50~99C;
2. Resolution: 0.1C; 3. Accuracy: 1C (-50~70C);
4. Sensor error delay: 1 minute
5. Power supply: 110VAC10%, 50/60Hz;
6. Power consumption: 3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60C;
10.Storage temperature: -30~75C;
11.Relative humidity: 20%~85% (No condensate).

Package Content:
1 x STC-1000 Temperature controller 110v
1 x 2M Sensorv
Note to check whether the sensor is connected well. Please be sure to connect the heating relay.
FAQ:
1, Does not read temperature at all?
A: 1. Check whether the sensor is connected well. 2. Check your wiring diagram. Most of customers don't wire it right and think the unit is bad. The right wired diagram is displayed in pictures.
2. Cooling relay not activating ?
A: Cooling has the delay function. We set the default value as 3 minutes. When the heating turns off, the cooling will be on after 3 minutes. If the customers want it turns on immediately, you can set it as 0.