Related posts
Feature
SOLAR CHARGE CONTROLLER - Simple visible LCD display shows live parameters of power system, monitor and check system status.SOLAR CHARGE REGULATOR - 12V 24V auto switch, and automatically break off when the battery is not sufficient to power loads, make sure battery will not drain off.
SOLAR CONTROLLER - A key to open and close the load and restore the factory settings.
PWM CHARGE CONTROLLER - Intelligent Lighting On/Off by Daylight Sensation and Timing Control
With USB - 5V charging (for 500mA) for mobile phone(Not suitable Apple iPhone 5 5G)
Description
NOTE:Optional USB 5V charging (500mANot suitable Apple iphone 5 5G)Package Included:
1. 1X 80A PWM solar charge controller
2. 1X User's Manual
3. 1X Temp. Sensor
80A Solar Panel Charge Controller Regulator Solar panel 960W/12V 1920W/24V
Compatible with 1920W(24v) solar panel with dark activated function,
Max current is 80A
80A Solar Panel Charge Controller 12V/24V + LCD displayCompatible with MAX 1920W Solar Panel 12V/24V Auto Switch;
1, LCD screen display
2, Easy operation interface
3, PWM charging mode
4, Parameter user can reset,
5, A key to open and close the load,
6, A key to restore the factory settings,
7, Battery reverse discharge protection,
8, Battery reverse polarity protection
9, Battery under voltage protection,
10, Overload, short-circuit protection,
11, Automatic temperature compensation function,
12, USB 5V charging (for 500mA) for mobile phone.
SOLAR80 Datasheet:
Output Voltage: 12V/24V Automatically distinguish voltage
Rated working current :80A
Solar panels voltage:48V
Full Charge Cut : 13.8V/27.6V
Low Voltage Cut :10.7V/21.4V
Temp ompensation: -4mv//cell
Zero Load Loses: 25mA
Low voltage recovery(settable): 12.5V/25.0V
Loop pressure drop: 160mV
Installable maximum cable: (25mm2)
Working temperature: -10~60
Storage temperature: -30~70
Temperature requirement: 90,no condensation
Dimension: 90 mm188 mm48 mm
Mounting hole spacing: 60 mm178 mm --5
Weight: 1000g
Charging mode: PWM mode