Related posts

Feature

1.Valve Body: 2 Way FNPT 1" DN25 Brass. Orifice Size: 20mm Actuator: DC12V CR02 3 Wires Control
2.Regular watering the flowers, Timing humidification , Air compressor drain at regular time.
3.Limit Switches Inside, Cut Off Power Automatically When F.O or F.C
4.This motorized valve is a good replacement of the solenoid valve.It can be installed at any angle and direction,and can work in moist conditions.
5.Float ball design, no leak, large flow, the valve is bi-directional ball valve , regardless of inlet and outlet , most suitable for heavy dirt and long time no action.

Description

Technical Parameter:
Product size: 1" FNPT DN25
Maximum Working Pressure: 1.0MPa
Circulation Medium: Water,Oil,Gas
Rated Voltage: DC12V
Wiring Control Methods:CR01/CR04/CR05
Working Current: 80MA
Open/close Time: 3-5 sec.
Valve Body Material: Brass
Actuator Material: Engineering Plastics
Sealing Material: EPDM
Cable Length: 0.5m
Environment Temperature:-15~50 Celsius
Liquid Temperature: -5~100 Celsius
Manual Override: NO
Indicator: NO
Protection Class: IP65

Application:
1.HVAC
2.Water treatment
3.Chemical process
4.Small industrial equipment for automatic control
5.Replacing solenoid valve, particularly when solenoid cannot work reliably
6.Automatic control systems
7.Efficient water-saving, water equipment
8.Solar hot water project
9.Regular watering the flowers, Timing humidifyingtiming of drainage of Air compressor .

Features:
1).Smart shape, Perform reliably, large output torque, as long as 50000-100000 times , convenience for all kinds of requirements.
2).Float ball design, no leak, large flow, the valve is bi-directional ball valve , regardless of inlet and outlet , most suitable for heavy dirt and long time no action.
3).The conditions that solenoid valve can not work.
4). High protection class, can be worked in moist conditions.
5).POM cooperate with metal gear, the POM gear is used in high-speed level to reduce noise, At the same time metal gear is applied at the low-grade to ensure the reliability of the gear.
6).Electrical and mechanical limit integrateddesign, accurate localization , high consistency , put an end to swing of valve.