Related posts

Feature

Note:Have 2 DIFFERENT BOARDS,WHITE BOARD AND GREEN BOARD,THE SAME QUALITY,WE SHIP AT RANDOM,for BMW INPA Ediabas K+DCAN USB Interface With USB connector (built in 1.4m long USB cable) for BMW R56 E87 E93 E70,NEED INSTALL SOFTWALL FIRST,then connect to car and computer(support Windows NT and Windows XP system ONLY, The diagnose software do not support Windows 7or Windows 8,IOS system),WITHOUT indicator light.If software in CD doesn't work,kindly contact us,we'll send software to you!!!)
This Interface allows full diagnostic of BMW's build from 1995 - 2008(Doesn't support IOS system,it's need install software before using,or it'll doesn't work.DOESN'T SUPPORT ALL MODES,ONLY SUPPORT CAR MODE IN OUR COMPATIBLE LIST,PLEASE CHECK BEFORE YOU PURCHASE IT!)
NOTE:only works with windows XP or NT! Works with INPA, SSS, Progman and others(All functions as in Omitec Interface) High speed data transmission Double K-Line support,Switched inpa k+Dcan,you can use the inpa for more cars. Since some cars need disconnect,then can use the inpa k+dcan,also some need connect that two pin then can do,but with our switch,you can use directly easier,so we say it can support more cars easier.
INPA K+CAN K+DCAN Car Diagnostic Tool Cable OBD USB Interface for BMW R56 E87 E93 E70 Read erase errors,Adaptations,Coding,It works with INPA,high quaility,Read & erase errors Switched inpa k+Dcan,you can use the inpa for more cars. Since some cars need disconnect,then can use the inpa k+dcan,also some need connect that two pin then can do,but with our switch,you can use directly easier,so we say it can support more cars easier.
NOTE: The diagnose software needs a special program to work properly. The anti-virus software on PC may notify it as "virus" by mistake. Please turn off the anti-virus software on your PC to make sure the diagnose software works normally. The diagnose software do not support Windows 7or Windows 8,it is just suitable with Windows NT and Windows XP,please pay attention on this before purchase!

Description

Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral
1.Connects to USB (built in 1.4m long USB Cable, creates virtual comport)
2.Double K-Line support
3.High Speed D
4.CAN and PT-CAN support (500 kbit/s)
5.Low Speed PT-CAN support (100 kbit/s)
6.Battery voltage detection by control line
7.Ignition voltage detection by control line

Features
- read and delete errors
- adaptations
- driver programming
- applu coding
- and others...

Supports Protocols:
1. Fast magisterial D-CAN and PT-CAN (500 kbit/s)
2. Slow magisterial K-CAN (100 kbit/s)
3. Standard BMW protocol (BMW OBD interface)-E60, E61 after 3/2007

D-CAN for:
- E60, E61 od 03/2007
- E83 od 09/2006
- E81, E87 od 03/2007
- E90, E91, E92, E93 od 03/2007
- E70 (new model X5)
- R56 (new model MINI)

PT-CAN, K-CAN - fully switchable speed of migistral CAN - you can diagnose driver without any car

Protocol ""BMW OBD interface"" for older cars:
- from 1995 to 1998 (don't need K-line).
- from 1998 to 03/2008 (all models)

Package lists:
1x for BMW INPA Interface ( Diagnostic Scanner)
1x CD