iTech IT8512B+ Single Channel DC Electronic Load, 500V, 15A, 300W

Feature

500V/15A/300W DC Electronic load
Highlight VFD display
Dynamic mode: up to 10kHz
Resolution of voltage and current: 0.1 mV / 0.1 mA
Four working modes: CV/CC/CR/CP

Description

iTech IT8512B+ Single Channel DC Electronic Load IT8500+ Single Channel DC Electronic Load x Battery test, automatic test, OPP test, OCP test functions The load will default in the specified mode when turn it on Highlight VFD display Remote sensing function Storage for 100 sets With rotary coding switch to make an easy operation IT8512B+ Single Channel DC Electronic Load, 500V, 15A, 300W IT8500+ series is a single-channel programmable electronic load. With power ranges from 150W to 3000W. The user can perform online voltage measurements and adjustments or simulate short circuit test using the simple keypad on the front panel. It also offers a full-featured battery mode for discharging test. IT8500+ series DC loads are a versatile instrument for static and dynamic testing of power supplies, batteries, DC-DC converters, battery chargers, provides user the best testing solution. Constant Current CC In CC mode, the electronic load will sink a constant current regardless of the changes of input voltage. Constant Voltage CV In CV mode, the electronic load will attempt to sink enough current to control the source voltage to the programmed value. Constant Resistance CR In CR mode, the module will sink a current linearly proportional to the input voltage in accordance with the programmed resistance. Constant Power CP In CP mode, the electronic load will dissipate power in accordance with the programmed value. If input voltage increase, input current will decrease. Transient Mode Transient operation enables the module to periodically switch between two load levels, as might be required for testing power supplies. Transient operation can be turned on and off from the front panel (shift + numeric key2)