Mophorn Powder Coating Machine 40W 50L Capacity Electrostatic Powder Coating Machine Spraying Gun Paint 550g/min WX-101 Powder Coating System (40W 50L)

Feature

Model Number:WX-101;Input Power : 40W;Stainless Steel Powder Hopper Capacity : 50L
Output current: 0-200uA;Input air pressure: 0-0.6Mpa;Output air pressure: 0-0.5Mpa;Output powder volume: Max. 550g/min
High voltage module near the nozzle, low voltage loss, replaceable high voltage components to bring convenience to the maintenance.
This electrostatic powder coating system with the design of two central gas , so that the needle is no longer needle-guided fluid powder, to enhance the discharge effect, improve the rate of powder.
This WX-101 electrostatic powder coating equipment is widely used in the home appliances, hardware, security door (window), fins, architectural, auto parts, sports equipment, medical equipment, aluminum and other industries.

Description

Powder Coating System with Spraying Gun WX-101 Electrostatic Machine

Introduction :

Electrostatic Powder Coating Machine is a dry finishing process, using finely ground particles of pigment and resin that are generally electrostatically charged and sprayed onto electrically grounded parts. The charged powder particles adhere to the parts and are held there until melted and fused into a smooth coating in a curing oven. Before coating, the parts to be coated are first pretreated similarly to conventional liquid coated parts. The pretreatment process is normally conducted in series with the coating and curing operatios.

Technical Data

Input Power Voltage: 110V-120V AC

Frequency : 50Hz-60Hz

Input Power : 45W

Electromagnetic valve control power voltage : DC110V DC

Input air pressure: 0-0.6Mpa

Output air pressure: 0-0.5Mpa

Max. Air consumption: 13.2m/h

Output powder volume: Max. 550g/min

Output power voltage: 0 -100KV

Polarity: Negative

Output current: 0-200uA

Gun Weight: 500g

Length of Gun Cable:4m

Powder Hopper Volume : 50L

Material of the bucket:Stainess steel

Powder coating applicable: All kinds of powder without the metals

Features:

With flat and smooth appearance and workpiece with no deep corners.

Thickening resistance to puncture the tip, the low maintenance rate.

Large flow of pneumatic components, in the smaller air pressure, can still achieve higher powder.

All stainless steel for powder cartridge, can not use tools to easily remove all parts and clean.

Rotating atomized air flow is greatly improved coating quality.