Finding the best 1/4″ valve suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Malida Equal Straight OD Tube Ball Valve Quick Connect Fitting 1/4-Inch by 1/4-Inch OD Valve Start RO Water System Set Of 5
Feature
1/4 Inch by 1/4 inch OD tube Ball Valve Quick Connect FittingsPackage Quantity:5 pack.
DrinksDispenseandwaterfiltrationsystem fittings
Fits all Water Purifiers Filters ,Reverse Osmosis Systems
Uses 1/4 Inch Supply Tube
Description
Size:1/4 Inch by 1/4 inch OD tube Ball Valve Quick Connect FittingMaterial: Plastic
Color: White + Blue
Package Quantity:5 pack
Scope of application: household water purifier
2. Milton (S-684-4) 1/4" MNPT Male Tank Valve
Feature
INCLUDES: Standard valve core and plastic cap. Overall length (with cap): 1.5 inch.DESIGNED: For use with air compressor tanks to fill vessels with air.
IDEAL: Tank valve prevents air from leaking out while allowing for air to pass through for inflation.
NPT: 1/4" Male national pipe thread. Cap thread size: .305-32.
MAXIMUM AIR PRESSURE: 200 pounds per square inch (PSI).
Milton is your number 1 source for Quality Air Accessories
Since 1943 Milton has been producing Quality Air Accessories
Milton covers automotive, industrial, hardware, agriculture, heavy-duty fleet and MRO markets
Description
Milton (S-684-4) 1/4" MNPT Male Tank Valve 1/4" MNPT tank valves are designed for use in filling vessels with air. Standard valve core with plastic cap measures at 1 1/2" overall length. Maximum pressure of 200 PSI. Cap thread size of .305-32. Other recommended tank valve size: Milton #S-684 ( male NPT, 1 overall length w/cap) tank valve. |
3. Kingston KMBVM Series Brass Mini Ball Valve, Lever, 1/4" NPT Male x NPT Female
Feature
Chrome-plated brass for higher corrosion resistance than regular brass or steelLever handle for on/off manual control
Full port flow for higher operating efficiency than standard port
Inline valve for connecting two pipes going in the same direction
Female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings
Description
This Kingston KMBVM Series mini ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off manual control, and full port flow for higher operating efficiency than standard port. This inline valve has 1/4" male and female National Pipe Taper (NPT) threads for connecting a female threaded pipe and a male threaded pipe going in the same direction. This full port ball valve is pressure rated to 400 pounds per square inch (psi) at a maximum operating temperature of 400 degrees F, and is suitable for use in air, water, or inert gas applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Kingston manufactures safety valves, check valves, and flow control valves for industrial applications. The company, founded in 1908, is headquartered in Torrance, CA.
4. John Guest PPSV040808WP Single Straight Shut-Off Valve, 1/4" Tube OD x 1/4"
Feature
John Guest push-to-connect technology provides a simple, reliable, leak-free connection Manufactured from white polypropylene and equipped with EPDM O-ringsCan be used with plastic or soft copper tubing,Truly demountable without damage to pipe or fitting
Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics Manufactured with FDA compliant materials and NSF 61 and 51 certified
Provides a permanent/removable leak-proof connection, Corrosion free
Suitable for water and food applications, FDA Approved
Description
Jg Speed fit Ppsv040808Wp 1/4" X 1/4" Od Valve Start, White the Ppsv Range And Shut-Off Valve Is Offered For Tube Sizes 1/4" O.D. And 3/8" O.D., Produced In Polypropylene And Fitted Epdm O-Rings. Polypropylene Has The Advantage Of Being More Chemically Resistant Than Acetal. The Valves Are Use With Potable Water. Jg Speed fit Ppsv040808Wp 1/4" X 1/4" Od Valve Start, White Features: Designed For Hot And Cold Water And Radiant Heating Systems Push Fit Fittings Twist And Lock For Added Security No Tools Required Works With Copper, Cvpc, And Pex Pipe Permanent Leak-proof Connection Easy To Install Lead Free 1/4" X 1/4" Od5. Oregon 07-403 Shut-Off Valve for 1/4" Fuel Line Lawn Mower Replacement Part
Feature
Oregon 07-403 Replacement Fuel Line Shut-Off ValveFor 1/4" Fuel Line
Heavy-duty ball valve
In-line shutoff
Replaces Scag 48568
Description
OREGON specializes in high quality, aftermarket OEM equivalent parts and products. Whether it is a small fuel filter or a large deck spindle, and everything in between, OREGON replacement parts are manufactured to meet or exceed OEM specifications.6. LASCO 17-0995 1/4-Inch Compression by 1/4-Inch Compression Brass Ball Valve
Feature
Brass ball valveLead free brass construction
Lead free approved product in all states
Lever handle
1/4-Inch compression by 1/4-Inch compression
Description
LASCO Plumbing Specialties 17-0995 is a 1/4-Inch Compression by 1/4-Inch Compression Brass Ball Valve. Brass ball valve. Lead free brass construction. Lead free approved product in all states. Lever handle. 1/4-Inch compression by 1/4-Inch compression.7. Smith-Cooper International 8140 Series Brass Mini Ball Valve, Inline, Lever Handle, 1/4" NPT Female, Non-Potable Water Use Only
Feature
Forged brass for higher corrosion resistance than steelPlastic-covered lever handle for on/off manual control
Full port flow for higher operating efficiency than standard port
Inline valve for connecting two pipes going in the same direction
Female NPT threads for connecting to male threaded pipe fittings
Product contains brass which does not meet federal and state requirements for drinking water.
Description
This Smith-Cooper International 8140 Series mini ball valve is made of forged brass for higher corrosion resistance than steel and has a plastic-covered lever handle for on/off manual control. It has PTFE (polytetrafluoroethylene) seats and seals for resistance to chemicals, moisture, and high temperatures. This inline valve has a full port flow for higher operating efficiency than standard port and 1/4" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It is pressure rated to 600 pounds per square inch (psi) for cold working pressure (CWP), 150 psi for saturated steam. This mini ball valve is suitable for use in water, oil and gas applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Smith-Cooper International distributes pipe, fittings, and valves under its SCI trademark and manufactures valves under the Sharpe brand. The company, founded in 1993 and headquartered in Commerce, CA, meets International Organization for Standardization (ISO) standard 9002.
8. Dernord Mini Ball Valve 1/4" NPT Female x Male Thread SUS304
Feature
NPT Female&Male threads for connecting to male threaded pipe fittingsSUS304 body and ball for extra strength and corrosion resistance
Inline valve for connecting two pipes going in the same direction with Double-seal system
Heavy duty stainless handles to increase service life, fast 1/4 turn open or closed operation
Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing)
Description
From the Manufacturer
This Dernord mini ball valve is made of SUS304 for higher corrosion resistance, and has a blow-out proof stem to reduce leakage and valve damage. This standard port inline valve has Female&Male National Pipe Taper (NPT) threads for connecting two NPT Female&Male threaded pipes going in the same direction. This mini ball valve at a maximum operating temperature of 325 degrees F, and is suitable for use in air, water or inert gas applications.
Features: 1/4 Turn Shut-Off
Temperature range: -30F to 325F
NPT size: 1/4 INCH
NPT type: Female and Male
9. Malida 1/4-Inch Tube Quick Connector Ball Valve for water filters,water purifiers,Reverse Osmosis Systems (10 pack)
Feature
Notice:Our Connector Has Been Redesigned. It is Easier to Install Without Clips.The Product You Received Has No Clip. Don't Worry, This is Our Latest Product.Included Clips is Our Old Batch of Product.Material: POM(Polyoxymethylene), Plastic push to connect Tubing fitting.Straight Ball Valve, (pack of 10)
Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
Applications include: Water Purifiers,Water Filter,RO system ,beverage dispensing refrigerator ice maker coffee machine etc
FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
Description
Size:1/4 Inch by 1/4 inch OD tube Ball Valve Quick Connect FittingMaterial: Plastic
Color: White + Blue
Package Quantity:10 pack
Scope of application: household water purifier
10. Smith-Cooper International 8141 Series Brass Mini Ball Valve, Inline, Lever Handle, 1/4" NPT Female, Non-Potable Water Use Only
Feature
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeabilityLever handle for manual on/off control
PTFE seats and stem packing reduce the risk of leakage
Maximum pressure rating of 600 psig for WOG and 150 psig for WSP
Female NPT threads for connecting to male threaded pipes
Product contains brass which does not meet federal and state requirements for drinking water.
Description
The Smith-Cooper International 8141 series brass inline mini ball valve has a lever handle and National Pipe Taper (NPT) female threads on both ends. This valve body is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. This valve has a lever handle for manual on/off control. Polytetrafluoroethylene (PTFE) seats reduce the risk of leakage. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. This valve has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 600 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG), and 150 psig for working steam pressure (WSP).
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball's position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Smith-Cooper manufactures a wide variety of pipe fittings and valves. The company is headquartered in Commerce, California, and meets relevant ANSI, ASTM, and International Organization for Standardization (ISO) 9002 standards.