When you looking for mach3 usb interface, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable mach3 usb interface is not an easy task. In this post, we show you how to find the right mach3 usb interface along with our top-rated reviews. Please check out our suggestions to find the best mach3 usb interface for you.
Reviews
1. SainSmart 4 Axis Mach3 USB CNC Motion Controller Card Interface Breakout Board
Feature
The motion control card for machine control, with strong professional.Requires the operator to have the relevant expertise.If used improperly, may appear an accident, please strictly follow the instructions and warnings using this product if you are not sure, consulting engineers for help
First time users, if you are not familiar with the product and software features Mach3 In your test product, make sure the machine's power switch on hand, you can quickly turn off the power
Recommends that users install the emergency stop button and make sure the button is functioning properly. Please strictly follow the instructions and warnings using this product
1-year warranty and technical support dedicated from SainSmart
Description
Features:
1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop
switch, auto tool zero, home switch etc.
4. Support for connecting electronic handwheel;
5. Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.
6. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device;
7. 1 status LED, indicate connection status on the board.
2. CNC MACH3 USB 4 Axis Motion Control Card, Interface Breakout Board for Stepper Motor Driver
Feature
The interface output 0-10V analog signal, also can be configured as 0-5V output, convenient for you to choose the type you needStrong anti-interference ability, the frequency converter interface (AVI+, AVI-) is isolated from the computer and the main control circuit, won't be introduced by external strong current equipment
Super USB interface Mach3 motion control card, free drive, simple configuration and good compatibility. Especially designed for notebook and tablet PC
4 General-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other operations
Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor
Description
This type of the USB CNC Controller Card is of strong anti-interference ability, the frequency converter interface is isolated from the computer and the main control circuit,. The interference signal will not be introduced because of the introduction of the external strong current equipment.
The interface output 0-10V analog signal, also can be configured as 0-5V output, convenient for you to choose the type you need. To make the system more stable, you can use external 24V DC power supply to isolate USB and external port.
Super USB interface Mach3 motion control card, free drive, simple configuration and good compatibility. Especially designed for notebook and tablet PC, support for 4-axis linkage, you can connect four stepper motor drives or servo drives.
Specifications:
Size: 8077mm/3.153.03inches
Weight: 160g/0.35lb
Package List:
1USB CNC Controller Card
1USB cable
1CD
Note:
1, For this electronic product, pls care don't touch the water when you use it, or the circuit will be damaged and has a shorter servicelife.
2, Please allow small errors in the dimensions due to accidental imprecise manual measurement.
3. ECO-WORTHY CNC MACH3 USB 3 Axis 400KHz Breakout Board Interface Motion Controller Card CNC Interface Breakout Driver Board
Feature
Supports all versions of Mach3 and 3-axis linkage.Support system: Windows XP, 2000, Vista, 7. (not including Mac OS)
Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.
Maximum step-pulse frequency is 400KHz, can connect servo driver and stepper driver.
All IO port fully isolated, strong anti-interference, stable performance.
Description
Package Includes:1 x CNC Mach3 USB 3 Axis Motion Control Card
1 x USB Cable
1 x Manual
1 x CD
Features:
1. Support system: Windows XP, 2000, Vista, 7. (not including Mac OS)
2. Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.
3. Supports 3-axis linkage.
4. Maximum step-pulse frequency is 400KHz, can connect servo driver and stepper driver.
5. The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.
6. Speed testing function, the spindle actual speed displays on the Mach3 interface in real time.
7. Onboard isolated power supply, not need external power supply.
8. All IO port fully isolated, strong anti-interference, stable performance
9. Support XHC series of wireless electronic MPG, such as WHB04 MPG.
10. Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage.
Parameter Description
Axis Output Control:
Drive Current: Isolated open collector output 5V 20mA
Drive: Pulse + direction output
Output frequency: 2000KHZ
Axes: MK3: 3-axis, MK4: 4-axis, MK6: 6-axis
Isolation Voltage: 3.5KV
Spindle Inverter Output - 3 types of output modes:
Analog voltage output: 0-10v
PWM output: 5V, 1KHZ, Duty, 0-100%
Pulse + direction output: 5V, 15HZ to 4KHZ
8 IO Output:
Drive Current: Isolation: 50mA, 25V
Isolation Voltage: 3.5KV
16 IO Output:
Input Current: Isolated input 5mA, maximum voltage 25V
Isolation Voltage: 3.5KV
USB Interface: Complies with USB2.0 standard
4. FISTERS Mach3 USB 4 Axis CNC Motion Control Card Breakout Board 400KHz Support Windows 7
Feature
Support all versions of Mach3,Support system: Windows XP, 2000, Vista, 7. (not including Mac OS)USB jack does not need to install the driver, plug and play under all versions of Windows.
Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.
The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.
Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage
Description
Package Included:1pc CNC Mach3 USB 4 Axis Motion Control Card
1pc USB Cable
1pc Manual
1pc CD
Features:
1.Support all versions of Mach3
2.Support system: Windows XP, 2000, Vista, 7. (not including Mac OS)
3.USB jack does not need to install the driver, plug and play under all versions of Windows.
4. Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.
5.Supports 4-axis linkage.
6. Maximum step-pulse frequency is 400 KHz, can connect servo driver and stepper driver.
7. The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.
8. 16 input IO.
9. Speed testing function, the spindle actual speed displays on the Mach3 interface in real time.
10. Onboard isolated power supply, not need external power supply.
11. All IO port fully isolated, strong anti-interference, stable performance
12. Support XHC series of wireless electronic MPG, such as WHB04 MPG.
13. Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage.
Common Problem:
Because of the interference, MACH3 can not find the USB card
Problem Description: control cards, when suddenly turn on the spindle, or for spindle speed adjustment.
The problem: MACH3 software is stoping, status bar: please insert USB card.
Solution: the problem is caused by interference. Please connect the ground wire (PE) of the inverter and the ground wire of the shaft to the The earth
5. CNC MACH3 Interface Board Motion Engraving Machine Controller with USB Cable
Feature
RELIABLEThe frequency converter interface (AVI+, AVI-) is isolated from the computer and the main control circuit, Strong anti-interference abilityWIDE APPLICATIONSupport various versions of MACH3 software, support for the latest version. Support for Windows XP, WIN7, WIN8, WIN10, support for 64-bit systems, support for laptops, support for tablets.
VOLTAGEThe external wide voltage input, 12-24V, and anti-reverse function.
All the input signal isolation by the light lotus, can be accessed by emergency stop, the knife, limit, back to zero, etc., to ensure computer security.
All the way through the optocoupler isolated 0-10V analog voltage output, you can control the input voltage from 0-10V analog voltage converter to control the spindle speed.
Description
Features:
To provide PWM output (5V level), can be controlled by the PWM spindle control. Provide 4 output port (5V level), can be connected with the relay module optocoupler, water control, spray and so on. Can be accessed by a total of yang or common cathode, the input level of 5V, with optocoupler input stepper motor driver.
To provide electronic hand wheel interface.
Specifications:
Type:USB Interface Board
Support: for MACH3 software
Size: 9.8 x 6cm / 3.96 x 2.36in
Weight: 145g
Package included:
1 x interface board
1 x USB cable
1 x CD
6. Generic 5 Axis CNC Interface Adapter Breakout Board For Stepper Motor Driver Mach3 + USB Cable, Mach3 CNC Controller
Feature
fully support of MACH3 and other computer software support for parallel port control.USB power supply and peripherals powered phase separation to protect computer security.
peripheral wide voltage input,12-24V, and anti-reverse function.
all of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
can be accessed by a common cathode or common anode input level to 5V drive
Description
Package Includes1X 5 Axis Breakout Board
1X USB cable
Product Description
1, fully support of MACH3 and other computer software support for parallel port control.
2, USB power supply and peripherals powered phase separation to protect computer security.
3, peripheral wide voltage input,12-24V, and anti-reverse function.
4, all of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
5, all the way to the relay output port, control spindle switch. Output port P17 mouth.
6, all the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
7, open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
8, P1 as PWM outputs can be controlled with optocoupler input spindle governor.
9, can be accessed by a common cathode or common anode input level to 5V drive.
7. Doradus 5 Axis CNC Breakout Interface Board For Stepper Driver Mach3 With USB
Feature
5 Axis CNC BreakoutInterface Board For Stepper
Electronics
Please Allow 7-23 Business Days For Delivery
Package Contains One Item
Description
1pcs 5 Axis CNC Breakout Board For Stepper Driver Controller mach3 is available now from our US and UK warehouse Free shipping to US and UK in 3-6 business days ship to Canada, Brazil in 7-10 days in US warehouse ship to European countries in 7-10 days in UK warehouse 5 Axis CNC Breakout Interface Board For Stepper Driver Mach3 With USB Cable Description: Fully support of MACH3 and other computer software support for parallel port control. USB power supply and peripherals powered phase separation to protect computer security. Peripheral wide voltage input,12-24V, and anti-reverse function. All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security. Feature: All the way to the relay output port, control spindle switch. Output port P17 mouth. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. P1 as PWM outputs can be controlled with optocoupler input spindle governor. Can be accessed by a common cathode or common anode input level to 5V drive. Package included: 1 x 5 Axis breakout board 1 x USB cable8. UCONTRO CNC 200 KHz 4 Axis USB Mach3 Motion Control Card Breakout Interface Board Controller,12-32V DC Input
Feature
Support USB; Main device is 12-32V DC power supply input current should higher than 0.5A;12 ports photoelectric isolated input interface
10 ports photoelectric isolated output interface
1 port 0-10V spindle speed analog output interface (can change to PWM output);
Can support 5 axis stepper systems, 200 KHz pulse output for every axis;
Description
Package Contents:
1 x CNC 200KHZ USB MACH3 Breakout Board
1 x USB cable
1 x CD
Specification:
Support USB;
12 ports photoelectric isolated input interface for ordinary digital data;
10 ports photoelectric isolated output interface for ordinary digital data;
1 port 0-10V spindle speed analog output interface (can change to PWM output);
Can support 3 axis stepper systems, 200 KHz pulse output for every axis;
ARM motion control chip;
Main device is 12-32V DC power supply input; current should higher than 0.5A;
Compatible with MPG input, support the digital display MPG from our company.
Appearance and structure and size:
This motion control card is with a sealed shell structure. There are 4pcs setting holes at the bottom. We can fix 4pcs 4mm diameter holes at the cabinet and install the controller into the cabinet.
The products overall size is 163.1mm*80.8mm*27.8mm;
The bottom install size is 101.4mm*42.5mm
Connection define and method:
As the Figure showed above, the connection of the controller includes power supply interface, Ethernet connection interface, MPG interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below.
9. other 1 PCS 5 Axis CNC Interface Adapter Breakout Board for Stepper Motor Driver Mach3 + USB Cable, mach3 CNC Controller
Description
5 Axis CNC Interface Adapter Breakout Board For Stepper Motor Driver Mach3 + USB Cable, mach3 CNC controller
Features:
1, fully support of MACH3 and other computer software support for parallel port control.
2, USB power supply and peripherals powered phase separation to protect computer security.
3, peripheral wide voltage input,12-24V, and anti-reverse function.
4, all of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
5, all the way to the relay output port, control spindle switch. Output port P17 mouth.
6, all the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
7, open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
8, P1 as PWM outputs can be controlled with optocoupler input spindle governor.
9, can be accessed by a common cathode or common anode input level to 5V drive.
10. Axis CNC Mach3 Breakout Interface Board Axis CNC USB Card 200KHz Support Windows2000/xp/vista (4 axis)
Feature
Fully support USB hot swapping,to monitor USB attachment state any time. While Mach3 are working ,if you uproot USB cable, then plug it also can make it work at once.To support the following functions: Automatic tool-setting,electronic hand wheel, software limit, software backlash
Have Speed-measurement function,The Spindle actual speed is displayed on the Mach3 interface in real time. And innovatively provide real-time speed graph, Making the speed variations clear and lively.
There are 10 super-speed 10 MHz light-couplers, 24General light-couplers, so the total amounts of light-couplers are up to 34. Isolate all the input/output. The High costs design provides a complete anti-jamming function and perfect security protection.
Speed: 48M, so you don't need to use PC. The Signal is independently processed by the Movement Control Cards, Ensuring that you get really real-time information and reliability.
Description
Product Information:*200KHz,4 axis output, frequency 200KHz. Use 10MHz high-speed optical coupling to isolate electric power.
*Support 16 input points. 16 input-isolation light-coupler . Every light-coupler got LED indicator
*Speed: 48M . input real-time signals so you don't need to use PC, The Signal is independently processed by the Movement Control CARDS, Ensuring that you get really real-time information and reliability.
*Eight output dots .Users can set functions that you need by yourselves, For example :The driver's enable signal, Spindle open/close, and Cooling fluid control and the like.
*Control card uses USB to supply power. The Board carries isolating power DC-DC. It's convenient for you to use for you don't need to connect the power additionally
*U spindle speed measurement signal input . Speed: 60 thousand turns/minute. The speed will be displayed on the Mach3 at the same time,with the real-time display of spindle speed by waveform . It can display the spindle speed in Mach3 (the red part in the picture)
Note:Unzip the "usbmove.zip", and move it to: Mach3PlugIns. For example: if your Mach3 was installed in C disk (C:Mach3),then the "usbmove.dll should be moved to "C:Mach3PlugIns".
Packing list:
- 1X 4 axis CNC USB Card and cable set
