Top 10 raspberry sense hat

If you looking for raspberry sense hat then you are right place. We are searching for the best raspberry sense hat on the market and analyze these products to provide you the best choice.

Product Features Editor's score Go to site
RASPBERRY-PI RASPBERRYPI-SENSEHAT Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensors RASPBERRY-PI RASPBERRYPI-SENSEHAT Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensors
Go to amazon.com
NeeGo Bundle  5-Piece Build Your Own Computer Set Includes Raspberry Pi 3 B+ Motherboard, 32G SD Card w/Preloaded Noobs Operating System, Sense HAT Add-On, Hat Enclosure & 6-Foot 2.5A Power Supply NeeGo Bundle 5-Piece Build Your Own Computer Set Includes Raspberry Pi 3 B+ Motherboard, 32G SD Card w/Preloaded Noobs Operating System, Sense HAT Add-On, Hat Enclosure & 6-Foot 2.5A Power Supply
Go to amazon.com
Raspberry Pi SenseHAT (AstroPi) with HAT Enclosure Raspberry Pi SenseHAT (AstroPi) with HAT Enclosure
Go to amazon.com
264x176 Resolution 2.7 inch e-Paper Display Hat E-Ink Screen LCD Module SPI Interface with Embedded Controller for Raspberry Pi 2B 3B 3B+ Zero Zero W/Arduino/STM32 264x176 Resolution 2.7 inch e-Paper Display Hat E-Ink Screen LCD Module SPI Interface with Embedded Controller for Raspberry Pi 2B 3B 3B+ Zero Zero W/Arduino/STM32
Go to amazon.com
FidgetFidget Raspberry Pi ABS Case for Sense HAT FidgetFidget Raspberry Pi ABS Case for Sense HAT
Go to amazon.com
DX Transparent HAT Case Enclosure for Raspberry Pi B+/2B/3B DX Transparent HAT Case Enclosure for Raspberry Pi B+/2B/3B
Go to amazon.com
Raspberry Pi 3 Prototyping Board Proto Breadboard HAT by MakerSpot Soldered with Female Pin Connector PCB for Raspberry Pi 2 Pi 3 A+ B+ (1 Pack) Raspberry Pi 3 Prototyping Board Proto Breadboard HAT by MakerSpot Soldered with Female Pin Connector PCB for Raspberry Pi 2 Pi 3 A+ B+ (1 Pack)
Go to amazon.com
Geekworm Raspberry Pi 3 Model B+ Programmable Smart Temperature Control Fan and Power Expansion Board for Raspberry Pi 3 Model B+ / 3B / 2B Geekworm Raspberry Pi 3 Model B+ Programmable Smart Temperature Control Fan and Power Expansion Board for Raspberry Pi 3 Model B+ / 3B / 2B
Go to amazon.com
2483095-Raspberry Pi Sense Hat - AstroPi 2483095-Raspberry Pi Sense Hat - AstroPi
Go to amazon.com
Waveshare 2.7inch E-Ink display HAT for Raspberry Pi three-color SPI interface 264x176 resolution E-paper embedded controller Compatible with Raspberry Pi 2B/3B/Zero/Zero W Waveshare 2.7inch E-Ink display HAT for Raspberry Pi three-color SPI interface 264x176 resolution E-paper embedded controller Compatible with Raspberry Pi 2B/3B/Zero/Zero W
Go to amazon.com
Related posts:

Reviews

1. RASPBERRY-PI RASPBERRYPI-SENSEHAT Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensors

Feature

Price For: EachOrder Unit: Each1 Core Architecture:: AVR Core Sub-Architecture:: - Features:: 88 LED Matrix Display, Accelero/Gyro/Magneto/Air Pressure/Temp/Humidity I2C Sensors, Teeny Joystick For Use With:: Raspberry Pi Single Board Computers Kit Contents:: Add-on Board ATtiny88 SVHC:: To Be Advised Silicon Core Number:: ATtiny88 Silicon Family Name:: ATtiny
Silicon Manufacturer:: Atmel

Description

RASPBERRY-PI RASPBERRYPI-SENSEHAT Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensors

2. NeeGo Bundle 5-Piece Build Your Own Computer Set Includes Raspberry Pi 3 B+ Motherboard, 32G SD Card w/Preloaded Noobs Operating System, Sense HAT Add-On, Hat Enclosure & 6-Foot 2.5A Power Supply

Feature

ULTIMATE RASPBERRY PI 3 KIT - All-In-One Starter Set Arrives w/ Everything You Need to Start Building & Programming Your Own Computer Straight Out the Box
POWERFUL B+ MOTHERBOARD - Barebones Circuit Board Features 1.4GHz Quad-Core 64-Bit Processor, Built-In BLE Bluetooth, Wi-Fi, 4 USB Ports, HDMI Port & More
32GB MICROSD MEMORY CARD - Official Card Comes Preloaded with NOOBS Operating System for Use w/ All Raspberry Pi Models; Includes Full-Size Adapter
SENSEHAT & ENCLOSURE - Unique Add-On Board Detects Orientation, Pressure, Humidity, Velocity & Temperature; Black Enclosure Fits Standard Raspberry Pi HATs
6-FOOT MINI USB POWER SUPPLY - 2.5-Amp Adapter Charging Cord w/ Classic 2-Pin Plug is Specially Designed to Deliver Maximum Power While Preventing Reboot

Description

Starting out? Stick a finger into a Raspberry Pi!

Teach, learn, play and practice programming on your very own credit-card sized computer with this powerful Raspberry Pi Tech Bundle. Our convenient 5-piece set includes all the essential parts you need-and a little extra-to begin building a miniature computer from scratch. An ideal starter kit for young techies in training, the affordable pack offers a variety of educational benefits, introducing curious kids and inquisitive adults to the fundamentals of software development, coding, as well as digital art, website design, robotics, gaming and beyond.

Your DIY bundle arrives with everything you need to get going: (1) Raspberry Pi 3 B+ motherboard; (1) official 32G microSD card with full-size adapter and pre-installed NOOBS operating system; (1) Sense HAT add-on; (1) HAT enclosure; and (1) 6-foot 2.5A power supply. Stop spending a fortune on fancy boards and bits-add the Pi Bundle to your cart today!

What You Get

  • 1 x Raspberry Pi 3 B+ motherboard
  • 1 x 32G microSD card
  • 1 x SenseHAT
  • 1 x HAT enclosure
  • 1 x 2.5A power cord
  • The ultimate Raspberry Pi package!

Specs & Details

  • Motherboard: 1.4GHz 64-bit ARMv8 CPU, 1 GB RAM, 802.11n wireless LAN, Bluetooth BLE 4.2, 4 USB ports, 40 GPIO pins, full HDMI port, 3.5mm audio/video, CSI, DSI, MicroSD card slot
  • MicroSD card: 32GB memory, preloaded NOOBs
  • Sense HAT: 8x8 LED matrix, accelero, gyro, magneto, air, pressure, temp & humidity sensors, teeny joystick
  • Enclosure: 3-part, port-accessible, fits standard Pi HATS
  • Power supply: 2.5Amp adapter, 6 feet

How to Enjoy

  • Build a mini computer and plug into your choice of screen
  • Perform incredible feats of coding, programming and web-building
  • Learn the ropes of this revolutionary educational system
  • Share your technical and artistic creations with the computi

    3. Raspberry Pi SenseHAT (AstroPi) with HAT Enclosure

    Feature

    Bundle includes Raspberry Pi SenseHAT and HAT Enclosure.
    Does not include Raspberry Pi or other accessories.
    Expand the capabilities of the Raspberry Pi with an 8x8 RGB LED Array, Temperature Sensor, Humidity Sensor, Accelerometer and Gyroscope.
    Easy access to the SenseHAT by removing clear lid from enclosure.
    Fits other standard sized HATs. Not guaranteed to work with all HATs.

    4. 264x176 Resolution 2.7 inch e-Paper Display Hat E-Ink Screen LCD Module SPI Interface with Embedded Controller for Raspberry Pi 2B 3B 3B+ Zero Zero W/Arduino/STM32

    Feature

    No backlight, keeps displaying last content for a long time even when power down
    Ultra low power consumption, basically power is only required for refreshing
    Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
    SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Description

    Description
    264x176, 2.7inch E-Ink display HAT for Raspberry Pi, SPI interface
    This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface.
    Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications
    such as shelf label, industrial instrument, and so on.

    Specifications
    Operating voltage: 3.3V
    Interface: 3-wire SPI, 4-wire SPI
    Outline dimension: 85mm x 56mm
    Display size: 57.288mm x 38.192mm
    Dot pitch: 0.217 x 0.217
    Resolution: 264 x 176
    Display color: black, white
    Grey level: 2
    Full refresh time: 6s
    Refresh power: 26.4mW(typ.)
    Standby power: <0.017mW
    Viewing angle: >170

    Package Contains
    2.7inch e-Paper HAT x1
    RPi screws pack (2pcs) x2

    Development Resources
    Wiki : www.waveshare.com/wiki/2.7inch_e-Paper_HAT
    100% original,offer technical support!

    5. FidgetFidget Raspberry Pi ABS Case for Sense HAT

    Description

    Product overview:

    Designed to house the Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi 3 and HAT PCBs

    HAT can be removed without removing the Raspberry Pi from the enclosure

    All cut-outs are pre-cut into the case

    Camera ribbon slot in enclosure lid

    Display ribbon slot in enclosure lid

    Label recess on enclosure base

    Gloss finish

    6. DX Transparent HAT Case Enclosure for Raspberry Pi B+/2B/3B

    Feature

    Designed to house the Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi 3 and HAT PCBs
    HAT can be removed without removing the Raspberry Pi from the enclosure
    All cut-outs are pre-cut into the case
    Camera ribbon slot in enclosure lid
    Display ribbon slot in enclosure lid

    Description

    Transparent Raspberry Pi Sense HAT Case For Raspberry Pi B+/2B/3B
    Dimensions: 3.66 in x 2.48 in x 1.02 in
    Weight: 1.59 oz

    Packing List:
    1 x Case

    7. Raspberry Pi 3 Prototyping Board Proto Breadboard HAT by MakerSpot Soldered with Female Pin Connector PCB for Raspberry Pi 2 Pi 3 A+ B+ (1 Pack)

    Feature

    348 holes of prototyping area, Full breakout of the 40-pin Pi Header with pre-soldered female pin header
    Holes are connected in row and column groups
    Silkscreen marking for 40-pin Pi Header reference
    High quality HASL PCB finishing, D0.9mm drill holes and D1.9mm pad size
    Package Content: 1 Pack

    Description

    Bare PCB for Prototyping Board with Pre-soldered Pin Header for Raspberry Pi

    Move your breadboard project to this prototyping board, which perfectly fits onto Raspberry Pi 2 Pi 3 A+ and B+. This prototyping board can also be used on Pi Zero as over-size header board. With no soldering work, you can pack your project nicely on a Raspberry Pi and make it look professional!

    The high quality HASL PCB finishing is easier for hand soldering than gold plated or immersion gold PCB finishing. A 40-pin GPIO female header is pre-soldered for stacking on a Raspberry Pi board.

    FEATURES

  • 348 holes of prototyping area
  • pre-soldered with 40-pin pin Female Header
  • Full breakout of the 40-pin Pi Header
  • Holes are connected in row and column groups
  • Silkscreen marking for 40-pin Pi Header reference
  • High quality HASL PCB finishing
  • D0.9mm drill holes and D1.9mm pad size
  • Package Content: 1pc
  • * Raspberry Pi boards shown in the photos are for illustrative purpose only and is not included in this offer. The GPIO header is pre-soldered on the board.

    8. Geekworm Raspberry Pi 3 Model B+ Programmable Smart Temperature Control Fan and Power Expansion Board for Raspberry Pi 3 Model B+ / 3B / 2B

    Feature

    Width voltage input: 6V~14V' With power switch
    Output: DC 5V Max.4A with two channel outputs: OUT1 for external device such as servo, motor, robots, mechanical arm, intelligent card etc. (output interface: HT3.96);Max current is 2A, and can be programmed via GPIO programing to control the output of power supply; please refer to SAMPLE CODE 1;OUT2 (GPIO output for raspberry pi);Max current is up to 4A if the OUT1 be closed; CAN'T be programming control, it will be output to raspberry pi directly if the switch be turned on;
    Built-in temperature sensor, with active cooling fan, you can control flexibly the ON/OFF of mini fan via I2C command and GPIO programming. please refer to SAMPLE CODE 2; Temperature range and accuracy:-25 ~ + 100 when the 2 -55 ~ +125 when the 3
    Cooling Fan can be replaced, please refer to FAN SPECIFICATIONS;
    Standard HAT size; for SAMPLE CODE and more details, please refer to our wiki:http://www.raspberrypiwiki.com/index.php/Smart_Fan_and_Power_Expansion_Board

    Description

    This smart fan and power expansion board is designed for DIY geeks, especially for raspberry pi lover, compatible with raspberry pi 3 / 2B / B+
    [Features]
    1. Width voltage input: 6V~14V' With power switch
    2. Output: DC 5V 4A with two channel outputs:
    * OUT1 for external device such as servo, motor, robots, mechanical arm,intelligent card etc. (output interface: HT3.96);Max current is 2A, and can be programmed via GPIO programing to control the output of power supply; please refer to SAMPLE CODE 1;
    * OUT2 (GPIO output for raspberry pi);Max current is up to 4A if the OUT1 be closed; CAN'T be programming control, it will be output to raspberry pi directly if the switch be turned on;
    3. Built-in temperature sensor, with active cooling fan, you can control flexibly the ON/OFF of mini fan via I2C command and GPIO programming. please refer to SAMPLE CODE 2;
    Temperature range and accuracy:
    -25 ~ + 100 when the 2
    -55 ~ +125 when the 3
    4. Cooling Fan can be replaced, please refer to FAN SPECIFICATIONS;
    5. Standard HAT size;
    [FAN SPECIFICATIONS]
    - Side length is 30mm;
    - Thickness is 7mm;
    - Parameters: Voltage 5V, current 0.15A, speed 1OOOOR.P.M, noise 25dB, air volume 2.95CFMz
    Packing List:
    1 x Board
    1 x Mini fan (with install screws)
    1 x HT3.96-2P Male head

    9. 2483095-Raspberry Pi Sense Hat - AstroPi

    Feature

    Works With All Raspberry PI boards
    Accelerometer , Gyroscope , Thermometer
    Humidity & Pressure Sensor All in One!

    Description

    If you own a Raspberry Pi 1, 2 or a 3, you need this add-on! This fantastic "shield" has so much packed into such a small foot print. No need for external power input, as the shield pulls power from the Pi its self. Not only do you get an amazingly bright programmable 8x8 RGB matrix but you also get: -Accelerometer. -Gyroscope. -Magnetometer. -Pressure sensor. -Thermometer. -Humidity sensor. -Small multi-directional joystick. Product condition: New

    10. Waveshare 2.7inch E-Ink display HAT for Raspberry Pi three-color SPI interface 264x176 resolution E-paper embedded controller Compatible with Raspberry Pi 2B/3B/Zero/Zero W

    Feature

    No backlight, keeps displaying last content for a long time even when power down
    Ultra low power consumption, basically power is only required for refreshing
    Compatible with Raspberry Pi 2B/3B/Zero/Zero W,Onboard 4x Keys
    SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Description

    264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface

    Overview

    This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller,
    communicating via SPI interface, supports red, black, and white three-color display

    Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight,
    it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

    PACKAGE CONTENT

    2.7inch e-Paper HAT (B) x1
    RPi screws pack (2pcs) x1

    Conclusion

    By our suggestions above, we hope that you can found the best raspberry sense hat for you. Please don't forget to share your experience by comment in this post. Thank you!