When you want to find cnc board 4 axis, you may need to consider between many choices. Finding the best cnc board 4 axis is not an easy task. In this post, we create a very short list about top 10 the best cnc board 4 axis for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 cnc board 4 axis:
Reviews
1. 4 Axis CNC Nema23 Stepper Motor Dual Shaft 425oz-in 3A+FMD2740C Driver 40V 4A+400W 36V Power Supply+USB CNC Breakut Board Controller Kit For CNC Router
Feature
Name:4 Axis CNC stepper motor controller kit;Model Number:23HS2430B/FMD2740C;Type:HybridPower supply:400W,36V/9.7A;This cnc kit only support USB CNC Software,not for Mach3 software
Computer system:only support Win7;Driver electric current:4A;Driver microstep:128microstep
Driver name:FMD2740C;Stepper Motor Name:23HS2430B
Holding Torque:425oz-in/ 280Ncm;Step Angle(degrees):1.8;Phase:2
Description
Package include:
4x 23HS2430B Nema23 stepper motor 425oz-in 112mm 3A(Dual Shaft)
4xFMD2740Cstepper motor driver
1 x 400W 36V/9.7A switching power supply
1 x 4 Axis USBCNC breakout board
1 x Hand controller
1 x USB Cable
CD include with English user manual and software and register code
This cnc kit only support USB CNC Software,not support Mach3 Softare,when install the software need the right register key to run pls contact for it!
1. USBCNC breakout board
USBCNCV4.0 is a high performance motion controller which based on PC software USBCNC control
Computer system requirement
Minimum configuration:
1) CPU:1GHz
2) Memory: 512MB
3) 500MB free disk space
2.FMD2740Cstepper motor driver
2,Features
1.Power supply voltage 12 to 40VDC
2.Subdivision precision281632641281020optional
3.Maximum drive current is4A
4.Drive any 4A phase current of 2-phase or 4-phase hybrid stepping motor
Applications
Suitable for a variety of small and medium-sized automation equipment and instruments,for example: Small engraving machine, SMT machine, etc.
3. Nema23 Stepper Motor
General Specification:
Step angle accuracy:+ - 5%(full step,not load)
Resistance accuracy: + - 10%
Inductance accuracy:+ -20%
Datasheet(23HS2430B,Front shaft 8mm dia and 21mm length;back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque)
4.Switching power supply
400W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:36v/9.7 A,single output switching power supply
2. SainSmart 4 Axis Mach3 USB CNC Motion Controller Card Interface Breakout Board
Feature
The motion control card for machine control, with strong professional.Requires the operator to have the relevant expertise.If used improperly, may appear an accident, please strictly follow the instructions and warnings using this product if you are not sure, consulting engineers for help
First time users, if you are not familiar with the product and software features Mach3 In your test product, make sure the machine's power switch on hand, you can quickly turn off the power
Recommends that users install the emergency stop button and make sure the button is functioning properly. Please strictly follow the instructions and warnings using this product
1-year warranty and technical support dedicated from SainSmart
Description
Features:
1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop
switch, auto tool zero, home switch etc.
4. Support for connecting electronic handwheel;
5. Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.
6. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device;
7. 1 status LED, indicate connection status on the board.
3. SainSmart CNC Router 4 Axis Kit, TB6600 4 Axis 4.5A Stepper Motor Driver Board, Mach3 5 Axis Breakout Board
Feature
Output current: 04.5A, current stepless adjustable.Automatic half current function: when the motor stops running, the standby current is automatically reduced to half of the working current to reduce the heat of the driver.
USB power supply and peripherals powered phase separation to protect computer security.
It can be accessed by a common cathode or common anode input level to 5V drive.
Protect form: Overheated protection, over-current protection.
Description
Overview:TB6600-T4 4 axis driver board, using the Toshiba TB6600HG driver chip,
the maximum output of 4.5A current, current stepless adjustable,
4 stepper motors can be driven at the same time, suitable for NEMA17,
NEMA23 stepper motor, has a 12V power supply,can be used for MACH3 interface board or CNC controller;
have large driver current, smooth running, quiet small volume, convenient installation,
high cost performance. It is suitable for making CNC machines and other automation equipment.
5Axis mach3 interface board, suitable for mach3mill software, used for making engraving machine.
Suitable for computers with parallel port, operating system is WIN7 32-bit or XP.
Package list:
1 x TB6600-T4 4 Axis stepper motor driver board
1 x 5 axis breakout board
1 x DB25 parallel cable
1 x USB cable
4 x signal cables
1 x CD(User manual, wiring diagram, control software, etc.)
Download:
http://s3.amazonaws.com/s3.image.smart/download/101-60-278/101-60-278.zip
4. CNC Offline Controller 4 Axis +Handwheel 500Khz G Code DDCSV2.1 Replace Mach3 USB CNC Controller Engraving System Control Board
Feature
CNC Offline Controller 4 Axis DDCSV2.1 500Khz G Code +HandwheelThe control period of each position is only 4 second
high control precision, the pulse width can be adjusted
It supports the common stepper motor and servo motor
ARM+FPGA design framework, it supports the FANUC with high universality to be compatible with G code set
Description
Shipping list
one 4 Axis CNC offline Stand Alone controller(Black and silver color random)
one Manual Pulse Generator(Handwheel)
one 4GB USB Flash Drive
one USB Extension Cable
2PCS Controller Fastener
Other English manual (send via email )
Main Functions
Input interface 16-circuit optocoupler coupling isolation
Output interface Ordinary digital 3-circuit optocoupler coupling isolation 0-10V spindle control port with analog quantity(can be modified as PWM output);
Axis No. Support the 4 axis stepper motor control,
Single axis Pulse Max 500Khz
Main control chip ARM9
Core algorithm chip FPGA
Screen 4.3 inches TFT 480*272
Operational keys 17
Power supply 18~32V 0.5A
G Code USB flash disk to read the G code
MPG port Support the general MPG in the market
Other
Support the panel key with single-axis manual operation, manual step and CONT operation
Support the operation of quickly specify the running position;
Support the multi coordinate systems (with automatically saving function in case of power cut);
Support the function of saving data automatically after power down (press the start to automatically save the data in the operation, automatically save the data after power down)
Technical advantage
The ARM can finish the part of human-computer interface and code analysis
the FPGA can finish the part of underlying algorithm and control pulse generate
Port of the controller is extensible(8 Input/12 relay output)
It Does not need a dedicated computer for engraving machine
MPG(Hand wheel)
Resolution 100PPR
Supply Voltage DC5V +/-5%
Supply Current less than or equal to 80mA
More choices available(please contact,need extra fee)
8 input and 12 output extension board(M code)
24V Power supply
The Product from the factory will provide one year free warranty after sales and technical support in the life time .
5. SainSmart New 4 Axis TB6560 CNC Stepper Motor Driver Controller Board Kit,57 two-phase,3A
Feature
Professional design with super anti-jamming function for steadier running.Overload, Overheat Protection Function: Protect the Computer, Driver board and other equipments from being damaged.
Description
The ST330 is a compact single axis bipolar 3.0A/phase stepper motor micro stepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth-S3/S4), torque (100%, 75%,50%, 20%-S5/S6) ,work Current (0-3A-SW1/SW2/SW3)and decay mode (0%, 25%, 50% and 100%).
Features
* Stepping Motor: 57 two-phase, lower than 3A
* Single-chip motor driver for sinusoidal microstep control of stepping motors
* Power on in indication led
* 3Amps-34Volts(Supply voltages:12-30DC)
* Full step, half step, eight step and sixteenth step(selection with dipswitches)
* torque (100%, 75%,50%, 20%)
* work Current (0-3A selection with SW1/SW2/SW3)
* 4 Wire,6 Wire,8 Wire stepper motors can be used
* Two phases bipolar driver
* Easy wiring with standard screw terminals
* Step frequency up to 100khz
* fuse protection on power supply rail(protects the board,but also your power supply and motor)
NOTE: The link below is the document for SainSmart New 4 Axis TB6560 CNC Stepper Motor Driver Controller Board Kit
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-019-201/20-019-201.rar
6. SainSmart 4 Axis TB6600 T4 Stepper Motor Driver Board CNC Controller for NEMA17 NEMA23 Stepper Motor
Feature
Maximum output 2A current, for CNC controller or Mach3 interface board power supply.Automatic half current function: when the motor stops running, the standby current is automatically reduced to half of the working current, whcih can reduce the heat of the driver.
Overheated protection, over-current protection.
The maximum pulse rate is 200KHZ.
Using the PWM chopper - type single - chip bipolar sinusoidal Micro - step current control mode.
Description
Overview:TB6600-T4 4 axis driver board, using the Toshiba TB6600HG driver chip, the maximum output of 4.5A current,
current stepless adjustable, 4 stepper motors can be driven at the same time, suitable for NEMA17,
NEMA23 stepper motor, has a 12V power supply, can be used for MACH3 interface board or CNC controller;
have large driver current, smooth running, quiet small volume, convenient installation,
high cost performance. It is suitable for making CNC machines and other automation equipment.
Specification:
Dimensions: 166mm*88mm*34mm
DC Power input type: 14V-40V
Output current: 14.5A, current stepless adjustable
Working environment: Temperature-1550 Humidity<90%
Packing list:
1.TB6600-T4 4 Axis stepper motor driver board
2.CD(English user manual)
7. 3 Axis 4 Axis 5 Axis 6 Axis 200KHz NVUM USB MACH3 Motion Control Card CNC Controller Driver Breakout Board for Stepper Motor Servo motor (3 Axis)
Feature
Model Number:NVUM;Output frequency:200KHz;Size:81x138x28Support :MACH3 software
Main device is 12V-32VDC power supply input,current should higher than 0.5A
Compatible with MPG input,support the digital display MPG from our company.
can support 3-6 axis stepper systems,200KHz pulse output for every axis;
Description
Package include:
1 x Mach3 USB Card NVUM
1 x USBCable
English Manual Will send by Email.1.Performance parameter
1) Support USB;
2) 12 ports photoelectric isolated input interface for ordinary digital data;
3) 10 ports photoelectric isolated output interface for ordinary digital data;
4) 1 port 0-10V spindle speed analog output interface(can change to PWM output);
5) can support 3-6 axis stepper systems,200KHz pulse output for every axis;
6) ARM motion control chip;
7) Main device is 12V-32VDC power supply input,current should higher than 0.5A;
8) Compatible with MPG input,support the digital display MPG from our company.
9)Slave funct
2.the connection of the controller includes power supply interface, USB connection interface, MPG interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below.
3. Stepper motor control interface
As Figure 2-2 showed,No.1 terminal block is 6 axis stepper driver control output interface, from left to right, there are X,Y,Z,A,,B,C 6 axis output, it's common anode,the cable connection for each axis is COM+/CP-/DIR-, COM is common+ ,CP is Pulse-, DIR is direction-.Connection showed as Figure 2-3.COM+ connect with the SP+ and DIR+.
4.Spindle control output
We define the interface from left are: GND1(Output GND),VSO(0-10V adjustable speed output),INDEX(spindle speed feedback input),OUT1(common output port 1),OUT2(common output port 2),.
Take Nowforeuer inverter as the example. Spindle control output and the inverter connection showed as Figure 2-4.If ACM and DCM are closed,only need to connect one port.
8. TOPCHANCES 4 Axis TB6560 USBCNC Controller Driver Board USB Port with Hand Control CNC Controller Board Machine for for CNC Router Milling Engraving Machine
Feature
This USB6560T4 is a new 4 axis TB6560 CNC control board with USB input, suitable for controlling max.3A 2 phase stepper motor. This driver board is controlled by USB port, can only use with the CNC software special designed for this board. It can't be used with MACH3, KCAM4 or other CNC softwares.4 axis in one unit, easy handling with PC, power supply & motors.4 decay modes, suitable for 2 phase stepper motor with no more than 3A current. 4 current setting: 0.75A, 1.5A, 2.25A, 3.0A.
It can connect 8-way limit switch(each axis with up and down limit),this is more advantage than mach3.It can connect with manual control which could be with off-line work too,it is convenience to adjust the coordinate when tool setting.
Automatically reducing current on board, when stepper motors were forced to stop, the current on board will be 25% of full current to protect the motor and IC chips. When connected with manual control box, the board can work off-line, good for coordinate adjusting on tool setting part.
12V isolated power supply output easy for external application, like cooling fan. Limit port is optical isolated to protect IC, also it's with 12VDC input, easy for connecting with proximity switch.
Description
Parameter1) 4 axis in one unit, easy handling with PC, power supply & motors.
2) 4 decay modes, suitable for 2 phase stepper motor with no more than 3A current.
3) The software designed for this board, can support maximum 8pcs limit switches (Every axis with 2 pcs), much better than Mach3.
4) When connected with manual control box, the board can work off-line, good for coordinate adjusting on tool setting part.
5) 4 current setting: 0.75A, 1.5A, 2.25A, 3.0A.
6) Automatically reducing current on board, when stepper motors were forced to stop, the current on board will be 25% of full current to protect the motor and IC chips.
7) 12V isolated power supply output easy for external application, like cooling fan.
8) Limit port is optical isolated to protect IC, also it's with 12VDC input, easy for connecting with proximity switch.
Note 1:
This driver board is controlled by USB port, can only use with the CNC software special designed for this board. It can't be used with MACH3, KCAM4 or other CNC softwares.
Users should follow its manual and install the software correctly.
Note 2:
This driver board can't support spindle yet!
Note 3:
The software is USBCNC,not mach3,pls note this.
Include:
1 x 4 Axis CNC Driver Board
1 x RS232 Remote Controller
1 x USB Cable
1 x CD
9. 4 Axis TB6560 Nema23 Stepper Motor Driver Board CNC Controller Breakout Board 4V Type For CNC Router Milling Engraving Machine
Feature
4-wire 0-3.5A normally 3A , the 3.5A is the peak currentcan be regulated rate current output, bipolar stepper motor driver.Standard parallel port , supports Mach2/3,EMC2, KCAM 4 etc.
Optical isolated (IO) and DCDC power isolated to protect the PC parallel port and other equipments.
4 working modes: mixed mode , fast mode, slow mode, standard mode 4-microstep: 1 1/2 1/4 1/16 .
12-36V single power input uses the switch power chip as the 5V power supply, stable and low heat.you can download user manual from below link:https://drive.google.com/file/d/0B49xwe9ffk3fLXZvaFBMaUJ5V00/view?usp=sharing
Description
Package include:1 x 4 Axis TB6560 Stepper Motor Driver board High speed Optocoupler !!!
1 x DB25 parallel cable
1 x Fan
4 x M4 screw
English user manual will send by email
4 Axis CNC Controller TB6560 Stepper Motor Driver Board Products Features:
The advantages of the TB6560AHQ chip
The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.
Flush type low heat The area of the chip can support itself to cool when the current is low
Supports a lot of stepper motors
The advantages in the high-speed running condition
Features:
1. 4-wire 0-3.5A normally 3A , the 3.5A is the peak currentcan be regulated rate current output, bipolar stepper motor driver.
2. Standard parallel port , supports Mach2/3,EMC2, KCAM 4 etc.
3. Optical isolated (IO) and DCDC power isolated to protect the PC parallel port and other equipments.
4. Limit and emergency stop port ( standard DB9 port)
5. 4 working modes: mixed mode , fast mode, slow mode, standard mode 4-microstep: 1 1/2 1/4 1/16 .
6. 12-36V single power input uses the switch power chip as the 5V power supply, stable and low heat.
7. Adopts RC + 7414 auto semi-flow .
8. The relay output can control the main axis .
9. 5th axis extension control port ..
10. UEETEK 5 Axis CNC Breakout Board with optical coupler for Stepper Motor Driver MACH3/EMC2/KCAM4 (Green)
Feature
Maximum support 5-axis stepper motor driver controllers.Supports MACH3, EMC2, KCAM4 software.
Equipped with 4-wire limit switch to insure safety movement.
It is with relay port to control the CNC spindle.
Package - 1 x 5 Axis Breakout Board;1 x USB 2.0 Cable;1 x DB25 Cable
Description
DescriptionThe 5 axis breakout board is specially designed for the CNC axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be controlled by the PC via the MACH3, EMC2, KCAM4, etc.
Features
- 5 axis breakout board for CNC stepper driver controller.
- Maximum support 5-axis stepper motor driver controllers.
- Supports MACH3, EMC2, KCAM4 software.
- Equipped with 4-wire limit switch to insure safety movement.
- It is with relay port to control the CNC spindle.
- Comes with DB25 male to female cable and USB 2.0 cable.
- It can get power from PC through USB port.
- Working Voltage: DC 5V.
