Finding the best deck jack suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Akron Products Adjustable Shoring Jack - 4x4
Feature
SHORING JACK - Transforms a nominal 4 x 4 lumber into an adjustable building product.NON-PRIMARY SUPPORT - Recommended as a temporary or non-primary support.
HEAVY DUTY - Load capacity dependent on a 4 x 4 used up to 24,700 lbs.
ADJUSTABLE - Easy to assemble, easy to install.
MULTIPLE USES - Construction projects, Repairs or installations, renovations, sagging floors, and more.
Description
The Shore Jack is a convenient and durable way to make structural repairs and to function as temporary support for various construction and remodeling projects. The shore Jack along with a 4" x 4" wood post cut to a custom length becomes a versatile adjustable column.2. Vestil FJB-150 Basement Floor Jack, 54" - 150" Height Range, Maximum Height Capacity (lbs.) 2588, Minimum Height Capacity (lbs.) 11200
Feature
Jack provides support for leveling and stabilizing floor beamsThe telescopic style positions the brace for better leveling
Includes a screw and turning bar for easy height adjustment
Steel construction with red oxide finish for optimal durability
Turn Bar and Pins are stored inside the inner tube for shipping.
Description
This Vestil welded steel floor jack post (also called a basement floor jack) has a red oxide coating, a screw and turning bar, and dual-lock pins, and it extends telescopically for temporarily leveling, bracing, and stabilizing floor beams and joists during construction or repairs. The floor jack post can be adjusted and set to any height within the given range, allowing it to be used in applications with different height requirements. Welded steel provides strength. A turning bar and screw bolt are used to adjust the floor jack post's height, and two dual-lock pins secure the floor jack post at the desired height. The floor jack post has a diameter of 3". Both end plates are pre-drilled and measure 3-1/2 x 6 inches. The floor jack post should be installed on a concrete floor or concrete footing, with either end up.
Basement floor jacks, or jack posts, temporarily secure floor beams and joists in construction and industrial applications; they should not be used as permanent supports in new construction. Floor jack posts are typically made of steel for strength. They consist of an adjustable post and two end plates. The height of a floor jack post is adjusted using a screw and the post is held at the desired height with a series of pins. The bottom end plate must be installed on a concrete floor or concrete footing. Bolts must be used to secure each end plate to the structure the post is supporting, and a floor jack post's end plates may or may not have pre-drilled holes for these bolts.
Vestil Manufacturing Corp. manufactures materials handling equipment, including jib and gantry cranes, loading dock equipment, and storage solutions. The company, founded in 1968, is headquartered in Angola, IN.
3. Akron Adjustable Floor Jack (Model C-4), Akron Jacks Floor Jacks, Telescoping Jack For Temporary Support, Size Range 1'-1' 3" (2 Pack)
Feature
HEAVY DUTY FLOOR JACK - Premium quality, durable high-carbon steel floor jack. Coated to prevent corrosion. Self-centering plates (size: 4" x 5" x 0.82" minimum thickness) constructed to mitigate movement and prevent dishing.ADJUSTABLE FLOOR JACK DESIGNED FOR A CUSTOM FIT - This all in one jack stand is easy to assemble and install. All moving parts fit snugly to avoid lateral displacement, and the top and bottom plates are deeply embossed to mitigate movement and prevent dishing.
SAFE - Fully adjustable jack posts come with double carriage lock construction for added strength and safety.
TEMPORARY OR SECONDARY SUPPORT - Perfect temporary or additional support for primary areas such as stairs, porches, decks, crawl spaces and heavy load areas. Can also be used permanently as a secondary support.
SPECIFICATIONS - Size Range: 1'-1' 3", Weight: 8 lbs. Unit Cube: 0.2, Compression Load Range: up to 18,000 lbs.
Description
Adjustable, easy to assemble, easy to install floor jacks are designed for use during remodeling projects to reinforce stairs, porches, decks, or weak floors. Constructed of premium quality steel and coated to prevent corrosion. All moving parts fit snugly to avoid lateral displacement and the top and bottom plates are deeply embossed to mitigate movement and prevent dishing. The heavy duty high carbon steel is double locked for added safety. Compression strength is defined as testing to the point of failure. To determine safe or allowable load consult a licensed engineer. Product adjusts at the top; does not adjust at the middle. Two in a package4. STKUSA Wide Deck Motorcycle Center Scissor Jack Lift, Bike Repair Stand 1100lbs
Feature
Rubber pad on top to prevent slippage and scratchingCenter lift for motorcycles
A socket is included for raising or lowering
Steel construction with a blue paint finish
Sturdy Design
5. JET SJ-5T 5-Ton Screw Jack
Feature
Contractor quality mechanical jack for all-purpose lifts and supportsHolds heavy loads indefinitely - will not creep
Heavy-duty bell shaped cast base
Less effort required to lift capacity load with new design
Corrugated steel swivel head turns easily under load
NOTE: Turning bar sold separately
Description
Contractor quality mechanical jack for all-purpose lifts and supports Holds heavy loads indefinitely - will not creep Heavy-duty bell shaped cast base Less effort required to lift capacity load with new design Corrugated steel swivel head turns easily under load6. Vestil FJB-16 Basement Floor Jack, 12" - 16" Height Range, Maximum Height Capacity (lbs.) 9738, Minimum Height Capacity (lbs.) 9738
Feature
Jack provides support for leveling and stabilizing floor beamsThe telescopic style positions the brace for better leveling
Includes a screw and turning bar for easy height adjustment
Steel construction with red oxide finish for optimal durability
Description
Basement Floor Jack 16 In Max Height7. Vestil FJB-100 Basement Floor Jack, 54" - 100" Height Range, Maximum Height Capacity (lbs.) 5600, Minimum Height Capacity (lbs.) 8438
Feature
Jack provides support for leveling and stabilizing floor beamsThe telescopic style positions the brace for better leveling
Includes a screw and turning bar for easy height adjustment
Steel construction with red oxide finish for optimal durability
The hardware is shipped inside the tube to ensure that it is not lost
Description
This Vestil welded steel floor jack post (also called a basement floor jack) has a red oxide coating, a screw turning bar, and dual-lock pins, and it extends telescopically for temporarily leveling, bracing, and stabilizing floor beams and joists during construction or repairs. The floor jack post can be adjusted and set to any height within the given range, allowing it to be used in applications with different height requirements. Welded steel provides strength. A turning bar and screw bolt are used to adjust the floor jack post's height, and two dual-lock pins secure the floor jack post at the desired height. When opening the product, the pins can be found inside the tube secured in a cardboard casing. The floor jack post has a diameter of 3". Both end plates are pre-drilled and measure 3-1/2 x 6 inches. The floor jack post should be installed on a concrete floor or concrete footing, with either end up.
Basement floor jacks, or jack posts, temporarily secure floor beams and joists in construction and industrial applications; they should not be used as permanent supports in new construction. Floor jack posts are typically made of steel for strength. They consist of an adjustable post and two end plates. The height of a floor jack post is adjusted using a screw and the post is held at the desired height with a series of pins. The bottom end plate must be installed on a concrete floor or concrete footing. Bolts must be used to secure each end plate to the structure the post is supporting, and a floor jack post's end plates may or may not have pre-drilled holes for these bolts.
Vestil Manufacturing Corp. manufactures materials handling equipment, including jib and gantry cranes, loading dock equipment, and storage solutions. The company, founded in 1968, is headquartered in Angola, IN.
8. Tiger Brand Jack Post JS-100 - Size Range 4'8"-8'4" (15Ga)
Feature
DURABLE - Premium quality, heavy duty high carbon steel.ADJUSTABLE - Easy to assemble, easy to install.
HEAVY DUTY - Corrects sagging floors, supports basement beams and stairwells, and more.
SAFE - Double locked for added safety.
SECONDARY SUPPORT - Can be used permanently if as a secondary support.
Description
Size:4'8" - 8'4" 4' 8 inch to 8' 4", 15 gauge adjustable Jack post, Max ext load 9,100 lbs, min ext load 18,000 lbs, additional support for crawl spaces, attic, staircase or decks, adjusts with 3/4 inch wrench, O.D. Gauge & tube dim 2-1/4 inch x 15 gauge x 49", screw size 1 inch x 7", -5 thread support, collar size 2-1/4 inch x 1/2", support pins 1/2 inch x 3", 13 gauge plate size 4 inch x 5", corrosion resistant inside & out, double carriage bolt & nut (zinc coated) for added safety, heavy plates suited for wood & steel, deep dish self-centering plates. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in United States.9. AKRON PRODUCTS C-79 Floor Jack
Feature
Adjustable, easy-to-assemble, easy-to-install floor jacks are designed for temporary support during remodeling projects to reinforce stairs, porches, decks, or weak floorsThis product is manufactured in united states
This product meets customer requirement
Description
Adjustable, easy-to-assemble, easy-to-install floor jacks are designed for temporary support during remodeling projects to reinforce stairs, porches, decks, or weak floors. Constructed of premium quality steel and coated to prevent corrosion. All moving parts fit snugly to avoid lateral displacement and the top and bottom plates are deeply embossed to mitigate movement and prevent dishing. The heavy-duty high-carbon steel is double locked for added safety. Compression strength is defined as testing to the point of failure. To determine safe or allowable load consult a licensed engineer. This product is manufactured in United States. This product meets customer requirement.10. Tel-O-Post Adjustable Floor Jack Post - Size Range 1'7"- 3' (15Ga)
Feature
DURABLE - Premium quality, heavy duty high carbon steel.ADJUSTABLE - Easy to assemble, easy to install.
HEAVY DUTY - Corrects sagging floors, supports basement beams and stairwells, and more.
SAFE - Double locked for added safety.
SECONDARY SUPPORT - Can be used permanently if as a secondary support.
