If you looking for milling bits carbide then you are right place. We are searching for the best milling bits carbide on the market and analyze these products to provide you the best choice.
Reviews
1. Ougar8 4 6 8mm CNC Carbide Lathe Milling Cutter End Center Cutting Roughing Router Bits Tungsten TiAlN Coated Engraving Cutting End mill Square Flat Endmills Micrograin solid Tools HRC45(3pcs/Lot)
Feature
1.Material: Tungsten Carbide TiAlN Coated2.HRA92,4 Flutes.Max Cutting material hardness:HRC45
3.Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
4.For CNC,Drill press,Engraving machine.Aluminium,Metel,wookworking,alloy steel,stainless steel,etc
5.Package: 3x End Mill Cutter CNC Bit
Description
Features:Flute:4 Flutes
High-density polished,superhard,high-wearable.
Max Cutting material hardness:HRC45
High temperature, strong-resistant raw carbide.
Long tool life.
Easier roughing and finishing processing.
Decreasing the times of changing cutters,Saving production time.
Package includes:
4 pieces End Mill Cutter CNC Bits
1.Cut diameter:4mm; Shank diameter:4mm ;Overall Length:50mm;
2.Cut diameter:6mm; Shank diameter:6mm ;Overall Length:50mm;
3.Cut diameter:8mm; Shank diameter:8mm ;Overall Length:60mm;
2. JERRAY CNC Carving 4.82 Deg Tapered Angle Ball Tip radius=0.5mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated Router Bits
Feature
Type: Tapered Ball Nose End Mill / Cone CuttersFlutes: 2 Flutes / Radius: 0.5mm / Coating: TiAIN
Shank Diameter: 1/4"((d1) / Cutting Length: 1-1/4"(L1)
Overall Length: 3"(L) / Single side angle B=4.82(Approx.)
Worked material HRC: 0~55 Degree
Description
-Type: Tapered angle Ball Nose End Mill / Cone Cutters
-Flutes: 2 Flutes
-Tip Radius: 0.5mm
-Shank Diameter: 1/4"((d1)
-Cutting Length: 1-1/4"(L1)
-Overall Length: 3"(L)
-Single side angle B=4.82(Approx.)
-Coating: TiAIN
-Material: imported tungsten carbide
-Suitable For:Cutting, end milling, slotting on: aluminum, solid wood,partical board,Hard wood, plywood, etc; -Use top quality imported tungsten steel carbide -Excellent chip removal effect! -High surface finish, excellent work -Long service life
Also we have other tip radius tapered endmills:
R=0.25x1/4" shank ASIN: B01EMH3846
R=0.75x1/4" shank ASIN: B01EMJKIBU
R=1.5x1/4" shank ASIN: B01EVECZGM
R=2.0x1/4" shank ASIN: B01EVENNMM
3. HQMaster 1/8" Shank Single Edged 1 Flute End Mill CNC Cutter Spiral Router Bits Cutting Milling Set Tool Tungsten Steel Upcut Bit 17mm CEL, Pack of 10
Feature
Shank diameter (SD): 1/8" (3.175mm)Overall length: 38.5mm
Cutting edge length (CEL): 17mm
Material: tungsten steel
Quantity: Pack of 10 (coming with storage case)
Description
HQMaster 1/8" Shank Single Edged 1 Flute End Mill CNC Cutter Spiral Router Bits Cutting Milling Set Tool Tungsten Steel Upcut Bit 17mm CEL, Pack of 10Features:
* Rustless and anti-static
* Work perfect on milling or cutting machines
* Best performance with high precision
* High quality and durable
Specification:
Material: tungsten steel
Color: as shown in the picture
Total length: 38.5mm
Cutting edge length (CEL): 17mm
Shank diameter (SD): 1/8" (3.175mm)
Storage case size: 55*55*9 mm
Package included:
10 x Single edged milling cutter
1 x Storage case
4. Ougar8 1 2 3 4 6 8mm CNC Lathe Milling Cutter Carbide End Center Cutting Spiral Router Bits Tungsten TiAlN Coated HRC45 Engraving Cutting End mill Square Flat Endmills Micrograin solid Tools(6pcs/Lot)
Feature
1.Material: Tungsten Carbide TiAlN Coated2.HRA92,4 Flutes.Max Cutting material hardness:HRC45
3.Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
4.For CNC,Drill press,Engraving machine.Aluminium,Metel,Woodworking,alloy steel,stainless steel,etc
5.Package: 6x End Mill Cutter CNC Bits
Description
Features:Flute:4 Flutes
High-density polished,superhard,high-wearable.
High temperature, strong-resistant raw carbide.
Long tool life.
Easier roughing and finishing processing.
Decreasing the times of changing cutters,Saving production time.
Package includes:
6 pieces End Mill Cutter CNC Bits
1.Cut diameter:1mm; Shank diameter:4mm ;Overall Length:50mm;
2.Cut diameter:2mm;Shank diameter:4mm ;Overall Length:50mm;
3.Cut diameter:3mm; Shank diameter:4mm ;Overall Length:50mm;
4.Cut diameter:4mm; Shank diameter:4mm ;Overall Length:50mm;
5.Cut diameter:6mm; Shank diameter:6mm ;Overall Length:50mm;
6.Cut diameter:8mm; Shank diameter:8mm ;Overall Length:60mm;
5. Drillpro 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8'' Shank
Feature
Use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency.High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
Cutting Edge Diameter: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3.17 mm)
Cutting Edge Length: 12mm. Overall Length: 37mm. Quantity: 1set (10 pcs)
Description
Specification:Material: Cemented carbide
Shank Diameter: 3.175mm
Cutting Edge Diameter: 0.8-3.0mm( 0.8,1.0,1.2,1.4,1.6,1.8,2.0,2.2,2.4,3.0mm)
Cutting Edge Length: 12mm
Overall Length: 37mm
Quantity: 1set (10pcs)
Guaranty: Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund.
Features:
use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency;
have sufficient bending strength and wear resistance; High hardness, high wear resistance, high strength;
sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
Application:
PCB, SMT, CNC, Mould, plastic fiber, carbon fiber, super hard wood, printed circuit board, other precision parts processing.
Package include:
10pcs PCB Drill Bit Engraving Mill Cutter
6. 1/4" 4Fl SE Carbide End Mill
Feature
Diam. Inches: 1/4"Shank Diam.: 1/4"
Length of Flutes: 3/4"
Overall Length: 2 1/2"
Will fit into many routers.
Description
Made in USA. Single End Center Cutting. 4 Flute. Solid Micrograin Carbide. Style E700.7. In-tool-home 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"high Speed Steel HSS 4 Flute Straight End Mill Cutter Set of 6
Feature
Product Name : End Mill;Material : HSSColor : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"
Suit for: Hardness of metal for above 30 degrees
4 Flute End Mill Cutter
Package Content : 6 x End Mill
Description
Product Name : End Mill;Material : HSSColor : Gray
01:1/2"x1/2",Cutting Diameter:1/2", Cutting Depth:1.57", Shank Diameter:1/2"
02:1/4"x1/4",Cutting Diameter:1/4",Cutting Depth:1",Shank Diameter:1/4"
03:3/8"x3/8",Cutting Diameter:3/8",Cutting Depth:/1.7",Shank Diameter:3/8"
04:3/16"x1/4",Cutting Diameter:3/16",Cutting Depth:4/5",Shank Diameter:1/4"
05:5/16"x5/16",Cutting Diameter:5/16",Cutting Depth:1",Shank Diameter:5/16"
06:1/8"x1/4",Cutting Diameter:1/8",Cutting Depth:3/4",Shank Diameter:1/4"
Suit for: Hardness of metal for above 30 degrees
4 Flute End Mill Cutter
Package Content : 6 x End Mill
8. 1.5MM Carbide End Milling Cutter,CNC Router Bits, End mill for PCB Machine Pack Of 10
Feature
Shank diameter: 3.175mm /0.125 inchCutting edge diameter: 1.5mm
These Engraving bits have sufficient flexural strength and wear resistance
Milling, hole and plate edge, surface clean, tidy, no burr
Verified Brand:JIUWU
Description
Specification:Material: solid carbide(Tungsten steel)
Shank diameter: 3.175mm /0.125 inch
Cutting edge diameter: 1.5mm
Cutting edge length: 9mm
Total length: approx. 37.000.20mm
Features:
These Engraving bits have sufficient flexural strength and wear resistance
Milling, hole and plate edge, surface clean, tidy, no burr
Made from ultra-fine grain carbide material which of good milling properties to ensure
efficient work
A Wide Range of Materials can be engraved, including: Circuit boards,Metal,Majority of
plastics, Wood,SMT,Fibre glass, Carbon,FR-4, CEM-3 board and environmental board
Package included:10Pcs Carbide End Mill Engraving Bits 1.5mm
9. JIUWU 1.0mm Tungsten Steel Carbide PCB CNC End Mill Engraving Bits Milling Machine Pack of 10
Feature
Shank diameter: 3.175mm /0.125 inchCutting edge diameter: 1.0mm
These Engraving bits have sufficient flexural strength and wear resistance
Milling, hole and plate edge, surface clean, tidy, no burr
Description
Specification:Material: solid carbide(Tungsten steel)
Shank diameter: 3.175mm /0.125 inch
Cutting edge diameter: 1.0mm
Total length: approx. 38.000.20mm
Features:
These Engraving bits have sufficient flexural strength and wear resistance
Milling, hole and plate edge, surface clean, tidy, no burr
Made from ultra-fine grain carbide material which of good milling properties to ensure
efficient work
A Wide Range of Materials can be engraved, including: Circuit boards,Metal,Majority of
plastics, Wood,SMT,Fibre glass, Carbon,FR-4, CEM-3 board and environmental board
Package included:10Pcs Carbide End Mill Engraving Bits 1.0mm
10. Lukcase 1/8" Shank Ball Nose 2 Flutes Carbide End Mills CNC Router Bits Double Flute Spiral Set Tool
Feature
High-density polished, wear-resistant, high temperature.High cost-effective, improve efficiency.
Mainly used in cutting and engraving.
Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Nylon, Resin, most plastics ect..
Ideal for 3D relief sculpturing, milling,cutting, engraving, slotting, etc.
Description
Specification:Material: Carbide Number of Flutes: 2 Flute
Cutting Diameter: 3.175mm (1/8") Shank Diameter: 3.175mm (1/8")
Cutting Edge Length (Flute Length): 17mm
Total Length: 38mm
Quantity: 1 box /10pcs
Features: High-density polished, wear-resistant, high temperature.
High cost-effective, improve efficiency. Mainly used in cutting and engraving.
Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Nylon, Resin, most plastics ect..
Using Tips: Lower the cutter grasper as far as possble.
Come to move slowly and accelerate gradually, but the move should not be too fast.
If the chuck works with vibration, reduce the feeding speed to check if there is something wrong with chuck or fixture.
Note: Please allow a bit hand measuring errors of 0-2mm.
Package Includes: 10 x Ball Nose End Mills
11. Metalworking Tools 1/8" Carbide CNC 4 Flute Spiral Bit End Mill Cutter, 5 Piece
Feature
Suitable for acrylic, PVC and hard woodMaterial: Alloy
Made in China
Description
Shank diameter: 3.175 mm/0.125, suitable for acrylic, PVC and hard wood, material: Alloy, cutting edge length: Approx.17 mm/0.67, cutting edge diameter: Approx.3.175 mm/0.125.12. 3.175mm Carbide End Mill Engraving Bits CNC PCB Machinery 0.5mm Cutting Pack Of 10
Feature
Cutting edge diameter: 0.5mmShank diameter: 3.175mm /0.125 inch
A Wide Range of Materials can be engraved, including: Circuit boards,Metal,SMT,Fibre glass ect.
Description
Specification:Material: solid carbide(Tungsten steel)
Shank diameter: 3.175mm /0.125 inch
Cutting edge diameter: 0.5mm
Total length: approx. 38.000.20mm
Features:
These Engraving bits have sufficient flexural strength and wear resistance
Milling, hole and plate edge, surface clean, tidy, no burr
Made from ultra-fine grain carbide material which of good milling properties to ensure
efficient work
A Wide Range of Materials can be engraved, including: Circuit boards,Metal,Majority of
plastics, Wood,SMT,Fibre glass, Carbon,FR-4, CEM-3 board and environmental board
Package included:10Pcs Carbide End Mill Engraving Bits 0.5mm
13. YUFUTOL-10 Pcs 0.3mm-1.2mm PCB Print Circuit Board Tip Spiral Flute Carbide Micro Drill Bits For Dremel PCB jewelry Making CNC Engraving
Feature
Cutting edge diameter (CED): 0.3-1.2mm, Shank diameter: approx. 1/8" (3.175mm)Tip spiral flute tungsten carbide drill bits with shaper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
Great for drilling PC Boards, Plastics, Fiberglass, Wood, Soft Metals, etc
Carbide tipped drill bits with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life.
Total length: 38mm.Package Included: 1 x 10pcs Carbide PCB Drill Bits with Protection Box
Description
Features:
Product Name: PCB print circuit board drill bit
100% quality tip spiral flute carbide drill bits and Brand new.
10pcs Brand New Carbide PCB CNC Drill Bits replacements for your CNC machines and any Handheld tool: Dremel, Jewelry,these long-lasting bits are made from high quality tungsten steel for a precise, easy experience
It is brand new with best quality from the LA HARDWARE INC
Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals, etc
Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life.
Specification:
Shank diameter (SD): 3.175mm
10pc Cutting edge diameter (CED): 0.3-1.2mm (Size Include :0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2mm)
Total length: 38mm
Quantity: 10PCS
Package Included:
1 x 10pcs Carbide PCB Drill Bits with Protection Box
Note: These bits are good quality but too tiny, specially for size of 0.3mm 0.4mm 0.5mm, it is very fragile for handling, so please be careful and take good control of your CNC speed.
14. CNBTR Professional 1/4" Shank Carbide Router Bit Set Milling Cutter Wood Case Tool Kit Pack of 15
Feature
1/4" shank,sealed bearings,smooth accurate cuts.Set contains a selection of popular bit profiles.
All heat-treated blade, with high concentricity and strong refused torsion.
Safety instructions: Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial cutting/engraving, not hazardous article.
Description
Note: The color of the item may vary slightly due to photography and your own computerFeatures:
1/4" shank,sealed bearings,smooth accurate cuts.
Set contains a selection of popular bit profiles.
All heat-treated blade, with high concentricity and strong refused torsion.
High-grade carbide blade with sharp cutting, smooth rotation, operating light.
Mainly used for woodworking trimming, puzzling, boring tenon and carving, etc.
Suitable for chipboard, MDF board, hardwood & softwood.
Stored in a wooden box, easy to maintain and protect.
Bits can be re-sharpened
Sealed bearings for smooth cutting
Sutiable for chipboard, MDF board hardwood and softwood
Specification:
Material: 45 # carbon steel, YG8 alloy
Color of bit: Red
Packing: wooden box
Shank Diameter: 6.35mm / 1/4''
Wood Box Size:17.5x12.5x4.8cm / 6.89x4.92x1.89" (L*W*H)
Size:
1 x Straight Bit 3mm
1 x Cove Box Bit - R6mm
1 x Roman Ogee - R4mm
1 x Cove Box Bit - R3mm
1 x Cove Bit - R6.3mm
1 x "V" Type Slotting Cutter 12.7mm
1 x 45Chamfer 12.7mm
1 x Traight Bit 6mm
1 x Mortising Bit 12.7mm
1 x Corner Round - R9.5mm
1 x Panel Pilot Bit 6mm
1 x Dovetail Bit 12.7mm
1 x Straight Bit 12.7mm
1 x Traight Bit 12mm
1 x Traight Bit 16mm
Safety instructions:
1.Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed
2. The bladed product is not use for people under 18 years.
3. The item is only use for industrial cutting/engraving, not hazardous article.
Package Included:
1 x One set of 15 pcs of Router Bit
15. Desel 1/4 Inch 6.35mm 15pcs Carbide Shank Wood Router Set Woodworking Cutter Trimming Knife Forming Milling Cutter with Handy Wooden Case
Feature
15pcs different 1/4" shank, sealed bearings and smooth accurate cuts.All heat-treated blade, with high concentricity and strong refused torsion.
High-grade carbide blade with fast cutting, smooth rotation,efficient operation.
Comes with a handy wooden box, easy to carry and storage.
Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists.
Description
Specifications:Shank diameter: 1/4 "(6.35mm/ 0.25")
Material: 45 # carbon steel, YG8 alloy
Product color: red + silver
Outside packaging: Wooden Box
Size of wooden box: 17.3 x 12.4 x 5.1cm/ 6.8" x 4.9" x 2" (L*W*H)
Quantity: 15 Pieces
Weight: about 560g
Package Included:
1 x Straight Bit 3mm
1 x Straight Bit 6mm
1 x Straight Bit 12mm
1 x Straight Bit 16mm
1 x Core Box Bit - R3.2mm
1 x Cove Box Bit - R6.3mm
1 x 90V Grooving Bit 12.7mm
1 x Mortising Bit 12.7mm
1 x Dovetail Bit 12.7mm
1 x Panel Pilot Bit 6.3mm
1 x Flush Trim Bit 12.7mm
1 x Round Over Bit R9.5mm
1 x 45Chamfer Bit 32mm
1 x Cove Bit - R6.3mm
1 x Roman Ogee Bit- R4mm
1 x Wooden Box
Note:
1. Please allow 2-3% error due to manual measurement and make sure you do not mind before ordering.
2. Please understand that colors may exist chromatic aberration as the different placement of pictures.
16. Router Bit Set 1/2 inch Shank,35pcs Professional Carbide Woodworking Milling Trimming Cutter Bit Tools Set Half Inch Shank With Aluminum Case
Feature
Size1/2 inch shank, sealed bearings for smooth accurate cutting.35pcs SetSuperb assortment of many types of essential Router bits,containing a selection of 35pcs popular router bits,can be re-sharpened.
MaterialAll heat-treated high-grade carbide blade with high concentricity, sharp cutting, smooth rotation, operating light.
Aluminum CaseWell stored and protected in a Aluminum box, convenient to carry and use.
ApplicationSuitable for chipboard, MDF board hardwood and softwood, mainly used for woodworking trimming, puzzling, boring tenon and carving, etc.
Description
Description:
The Estink 35 pcs professional router bit set with 1/2" shanks will impress you with the variety of bits and quality of each Cutter included in the set. Each of the 35 bits are CNC balanced and C3 micro-grain carbide Tipped. The bearings are selected from a premium quality assortment to ensure smooth and hassle-free operation,to accommodate both hand Held and router Table projects with lots of room for adjustment.
Specification:
Material: High-grade alloy
Shank: 1/2 inch
Quantity: 35pcs
Color:As Picture Show
Box Size: 32 x 22 x 5.8cm / 12.6 x 8.66 x 2.28"
Weight: 2.9kg(approx.)
Type:
Straight Bit 1/8"
Straight Bit 1/4"
Straight Bit 1/2" x 1"
Straight Bit 1/2" x 3/4"
Straight Bit 3/8"
Straight Bit 3/4"
Core Box Bit R1/8"
Core Box Bit R1/4"
Flush Trim Bit 3/8" x 1/2"
Flush Trim Bit 3/8" x 1"
Flush Trim Bit 1/2" x 1/2"
Flush Trim Bit 1/2" x 1"
Flush Trim Bit 3/4"
45Chamfer Bit 1/2"
Roman Ogee Bit R5/32"
Roman Ogee Bit R1/4"
Cove Bit R1/4"
Cove Bit R3/8"
Wave Edge Bit R3/16"
Dovetail Bit 1/2"
Dovetail Bit 9/16"
Mortising Bit 1/2"
Round Nose Bit 1/2"
90V Grooving Bit 1/2"
Panel Pilot Bit 1/4"
Round Over Bit R1/4"
Round Over Bit R3/8"
Round Over Bit R1/2"
Slot Cutter Bit 1/4"
Slot Cutter Bit 5/16"
Slot Cutter Bit 3/8"
Beading Bit R1/2"
Classical Cove Bit R5/16"
Classical Bit R3/16"
Classical Bit R1/4"
Package Included:
1 Box(35pcs) x Router Bits
Note:
Please allow 1-2mm error due to manual measurement. Thanks for your understanding.
