Finding the best shipping hammer suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Hitachi FDV16VB2 5/8 Inch 5-Amp Hammer Drill, 2-Modes, Variable Speed
Feature
Variable speed control dial, located on trigger for ease during high-speed or high-torque jobsImpact to drilling switch, located conveniently on body of tool for quick transition
Push button reversible drilling, allows for quick removal from materials and higher efficiency
Elastomer, non-slip grip, designed to comfortably fit in hand for improved control
Industrial grade keyed chuck, provides greater bit retention
Ball and needle bearing construction, adds durability and extends the tool life
Low noise cooling air-flow design, prevents overload and elongates tool use
Removable side handle with depth gauge, improves control and ensures accurate drilling depth for anchoring
Description
Hitachi FDV16VB2 5-Amp Hammer Drill with Side Handle, Depth Stopper, Chuck Key and Case2. Hitachi DV18DSDLP4 18-Volt Cordless Lithium-Ion Hammer Drill (Tool Only, No Battery)
Feature
Industrial grade 2-piece motor with up to 814 in-lbs of torque to handle the toughest jobsSingle sleeve ratcheting 1/2" metal keyless chuck with carbide jaw inserts for maximum bit grip and convenient swap-outs
22-position clutch with drill and hammer drill modes for properly matching the torque to the application
Aluminum gear case for maximum durability and strength
Metal belt hook keeps the tool close at hand
Bright LED light for increased visibility in enclosed work spaces
Externally accessible carbon brush for quick and easy maintenance
Lightweight at only 4.8 lbs
Recommended battery - 335791, Recommended charger - UC18YKSL
Covered by Hitachi's Lifetime Lithium Ion tool warranty
Description
Built with a heavy-duty, industrial grade 2-piece motor, the DV18DSDLP4 hammer drill is able to handle just about any task like boring large holes into wood, drilling into concrete or driving lag bolts, yet its 22-position clutch allow the user to adapt to low torque applications such as hardware installation or furniture assembly.3. Hitachi DH18DSLP4 18-Volt Lithium-Ion SDS Plus Rotary Hammer (Tool Only, No Battery)
Feature
Two-Step speed switch- Power Mode for fast and efficient drilling in larger diameters, and Save Mode to conserve battery power and prevent bending of small diameter bitsIdle strike restrictor prevents no-load hammering, extending tool life
Bright, base mounted LED to illuminate dimly lit workspaces
Quick bit insert for rapid changing of accessories
Externally accessible carbon brushes for quick and easy maintenance
Recommended battery - 330139, Recommended charger - UC18YKSL
Description
The DH18DSLP4 SDS-Plus Rotary Hammer is designed for optimal performance when drilling holes for the installation of concrete anchors. The DH18DSLP4 weighs less than most competitive models, making it perfect for overhead drilling. Using an electro-pneumatic mechanism to produce 1 ft-lb of impact energy, the DH18DSLP4 can drill up to 105 holes on one charge (1/4" x 1-1/4"). A factory set slip clutch protects the user and the gears in the event of a bound bit, while the idle strike restrictor prevents no-load hammering, eliminating unnecessary wear on integral parts. The DH18DSLP4 includes a side handle and depth gauge.4. Hitachi DH24PF3 15/16-Inch SDS-Plus Rotary Hammer, 3-Mode, VSR (D-Handle)
Feature
Three modes of operation; drilling only, hammering only and hammer drilling for flexibility within a range of applicationsElectronic variable speed control gives the tool a no-load RPM of between 0-1,150- best in class for fast drilling
2.5 ft/lbs of impact energy - best in class for delivering forcible hammering
Lock-on speed button for continuous operation, reduces user fatigue
5.3 lbs, one of the lightest and most compact (15-15/16") rotary hammers in its class
Description
The DH24PF3 15/16" SDS Plus Rotary Hammer offers the end-user 3-modes of operation. It hammer drills into concrete, brick or stone with ease and offers a best in class drilling speed and impact rate. The DH24PF3 is the ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering applications.5. Hitachi 729015 Spline 3/4-Inch x 8-Inch x 13-Inch 2-Cutter
Feature
Aggressive and DurableSpiral Flute Quickly Channels Debris From The Hole
Reinforced Flut Geometry Reduces Vibration And Transfers More Impact Energy
Description
Hitachi 729015 Spline Shank 3/4-Inch by 8-Inch by 13-Inch Hammer 2-Cutter Drill Bit6. DEWALT D25553K 1-9/16-Inch Spline Combination Hammer Kit
Feature
12.0 Amp motor high performance and overload protection, 490 rpm, 3300 bpm8.0 ft-lbs of impact energy provides fast drilling and powerful chipping
Rear handle mount for increased user comfort in down drilling applications
Rubber grip helps reduce the level of vibration felt by the user. Tool length: 18.6 inches
Factory-set clutch reduces sudden, high torque reactions if bit jams
Description
Ideal for a variety of professional applications in the commercial construction and concrete construction trades, the DEWALT D25553K 1-9/16-inch spline combination hammer kit offers a wealth of innovative features that deliver the comfort, control, and performance that commercial contractors demand. This kit includes a 360-degree side handle and heavy duty kit box for easy storage and transport.
Power and Convenience
Providing the power and performance you need to complete the toughest applications, the D25501K rotary hammer utilizes DEWALT's patented, high performance motor technology to generate up to 12 amps of power. When combined with its new motor technology, the D25501K's hammer mechanism produces high impact energy -- up to 8.0 foot-pounds -- to deliver fast drilling and powerful chipping to complete the most demanding applications.
The D25501K features a rear handle mount for increased user comfort in down drilling applications, a factory set clutch to reduce sudden, high torque reactions if bit jams, and a rubber grip for added comfort and resistance to vibration.
What's in the Box
D25553K 1-9/16-inch spline combination hammer kit with 360-degree side handle; heavy duty kit box; operating instructions
D25553K 1-9/16-Inch Spline Combination Hammer Kit
At a Glance
- 12 amp motor provides high performance and overload protection
- 8.0 foot-pounds of impact energy provides fast drilling and powerful chipping
- Rear handle mount for increased user comfort in down drilling applications
- Rubber grip helps reduce the level of vibration felt by the user
- Factory set clutch reduces sudden, high torque reactions if bit jams
Key Specifications
Amps | 12 amps |
---|---|
Optimal Concrete Drilling | 3/8-inch to 1-1/4 inches |
Impact Energy | 8.0 foot-pounds |
Vibration Measurement | 18.3 m/s2 |
Vibration Control | No |
Chipping | Yes |
No Load Speed | 490 rpm |
Loaded Speed | 3,300 bpm |
Tool Weight | 14 pounds |
About DEWALT
DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories and more. DEWALT tools can be found nationally and internationally wherever tools are sold. With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America.
7. Arm & Hammer Advance White Extreme Whitening with Stain Defense, Fresh Mint, 6 oz Twin Pack (Packaging May Vary)
Feature
Extreme WhiteningStain Prevention
Deep Cleaning
Breath Freshening
Fluoride Cavity Protection
Tartar Control
Fluoride Anticavity
Stain Defense
Value Twin Pack