When you looking for nema 17 connector, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable nema 17 connector is not an easy task. In this post, we show you how to find the right nema 17 connector along with our top-rated reviews. Please check out our suggestions to find the best nema 17 connector for you.
Reviews
1. UEETEK 4 Pcs Bipolar Stepper Motor Cables 100 cm Long for NEMA 17 used in Reprap 3D Printers CNC Machines
Feature
1 meter long cable with 2 connectors.6 pin JST connector on stepper side, compatible with many stepper models.
4 pin dupont connector of the driver side, compatible with RAMPS board and others.
High quality for durable and long-lasting use.
Lightweight for portable installation.
Description
Description
This item is well made of premium material for durable and practical use. With 1 meter long cable with 2 connectors, it's easy to use and install. The precise design will ensure its practicability in the work with highly performance. It is perfect for NEMA 17 used in Reprap 3D Printers.
Feature
- Color: As shown.
- Material: silicon rubber.
- Length: 100cm.
- 1 meter long cable with 2 connectors.- 6 pin JST connector on stepper side, compatible with many stepper models.
- 4 pin dupont connector of the driver side, compatible with RAMPS board and others.
- High quality for durable and long-lasting use.
- Lightweight for portable installation.
- Practical design for practicability.
Package Including
1 * 4 Pcs Bipolar Stepper Motor Cables 100 cm Long for NEMA 17 used in Reprap 3D Printers CNC Machines
2. UEETEK 4 PCS 1M Stepper Motor Cables 4Pin for NEMA 17 used in Reprap 3D Printers CNC Machines
Feature
1 meter long cable with 2 connectors.6 pin JST connector on stepper side, compatible with many stepper models.
4 pin dupont connector of the driver side, compatible with RAMPS board and others.
Size: Approx. 100 * 1.5 * 0.6cm/ 40 * 0.6 * 0.24 inch (L*W*H).
Other side of the cable has 4 pin dupont connector to mate with RAMPS electronics.
Description
DescriptionThese are spare cables for NEMA 17 stepper motor with 6 pin JST connector. Other side of the cable has 4 pin dupont connector to mate with RAMPS electronics.
Features
- Color: Shown in the pictures.
- Material: Plastic surface.
- Size: Approx. 100 * 1.5 * 0.6cm/ 40 * 0.6 * 0.24 inch (L*W*H).
- 1 meter long cable with 2 connectors.
- 6 pin JST connector on stepper side, compatible with many stepper models.
- 4 pin dupont connector of the driver side, compatible with RAMPS board and others.
Package Including
4 * 1M Stepper Motor Cables 4Pin for NEMA 17 used in Reprap 3D Printers CNC Machines
3. Bipolar Stepper Motor Cables 6Pcs 1000mm HONG111 Stepper XH2.54 Terminal Motor Link 4pin-6pin for NEMA 17 fit for Reprap 3D Printers CNC
Feature
HONG111 XH2.54 female to female stepping motor cable, 1 meter long cable with 2 connectors.4 pin dupont connector of the driver side, compatible with RAMPS board and others.
6 pin JST connector on stepper side, compatible with many stepper models.
These jumpers can be used for any of your electronic projects. Such as 3D printers, Arduino motherboards, modules, etc.
High quality and durable, lightweight for portable installation.
Description
Specifications:
1 meter long cable with 2 connectors
4 pin dupont connector of the driver side, compatible with RAMPS board and others
6 pin JST connector on stepper side, compatible with many stepper models
Material: Silicon rubber
Color: As shown.
Length: 1000mm
Perfect for NEMA 17 used in Reprap 3D Printers.
Package Included:
6 x Bipolar Stepper Motor Cables 1m Long
4. UEETEK 10pcs 3D Printer Stepper Motor Cable Lead Wire HX2.54 4 pin to 6 pin 1M
Feature
Pack of 10 Pieces 3D Printer Line HX2.54 4pin to 6pin White Black Terminal Motor Connector Cables for Stepper Motors.Size: Approx. 100 * 0.5 * 0.15cm/ 40 * 0.2 * 0.06 inch (L*W*H).
Material: PVC.
3D Printer Stepper Motor Parts.
Description
DescriptionThis item is manufactured with premium material for durable and long-lasting use. It's easy to use and install. The precise design will ensure its practicability in the work with highly performance.
Features
- Color: Shown in the pictures.
- Material: PVC.
-Size: Approx. 100 * 0.5 * 0.15cm/ 40 * 0.2 * 0.06 inch (L*W*H).
- High quality for durable and long-lasting use.
- Lightweight for portable installation.
- Practical design for practicability.
Package Including
10 *3D Printer Stepper Motor Cable HX2.54 4 pin to 6 pin White Terminal Connector Cable 1M
5. RepRapChampion 4 PCS x Stepper Motor Cables 1 Meter Long for NEMA 17 used in Reprap 3D Printers CNC Machines
6. 5pcs Nema 17 Stepper Motor Cable 4-wire 50cm Ramps 1.4 Arduino Reprap 3D Printer Parts
Description
Packing: 5x stepper motor cable 50cm7. [initeq] 3-Pack 2M (2 Meters) Stepper Motor Cable for 3D Printer and NEMA 17 Stepper Motors JST Connector
Feature
3 Pack6-Pin JST connector on motor end
4-Pin JST connector on controller end
Extra-long 2M length (over 6.5ft)
Easy to re-pin should a different pinout be required for your motor/driver combo
Description
2M (2 Meter, approximately 6.5 ft.) stepper motor cable- 6-pin JST connector commonly used on the stepper motors found on 3D Printers on motor end
- 4-pin JST connector on the other (this connector is commonly found on 3D printer control boards, but differs from the also-popular Dupont connector).
2M length enables flexibility in mounting locations for control boards (outside of heated enclosures) and remote bowden extruders.
Specifications:
- Length: 2M (2 meters, approx. 6.5 ft.)
- Wire Gauge: 26 AWG
Please verify that the pinout of your driver/controller and motor match the pattern of these cables. Some configurations do not require the "crossover", in which case this cable should still work after simply removing 3 pins from one end of the connector by depressing the tab on the metal pin with a small pointed tool while carefully pulling the wire (one at a time), and then re-inserting the wires in the desired order (after bending the tab back out slightly so that the pins will lock into the connectors). We are happy to work with you to help resolve any potential pinout issues. These cables work with the most common pinouts we have encountered, but not all. Thankfully reconfiguring the cable is very easy.
8. SoundOriginal 2pcs M6 3D Printer Stepper Motor Cable Lead Wire HX2.54 4 pin to 6 pin 1.5M (59 inch)
Feature
Pack of 2 Pieces 3D Printer Line HX2.54 4pin to 6pin White Terminal Motor Connector Cables for Stepper Motors.Size: Approx. 150 * 0.5 * 0.15cm/ 59 * 0.2 * 0.06 inch (L*W*H).
Material: PVC.
Lightweight for portable installation.
Scientific design for practicability.
Description
This item is manufactured with premium material for durable and long-lasting use. It's easy to use and install. The precise design will ensure its practicability in the work with highly performance.Features
- Color: Shown in the pictures.
- Material: PVC.
-Size: Approx. 150 * 0.5 * 0.15cm/ 59 * 0.2 * 0.06 inch (L*W*H).
- High quality for durable and long-lasting use.
- Lightweight for portable installation.
- Scientific design for practicability.
Package Including
2 * 1.5M 3D Printer Parts Line HX2.54 4pin to 6pin White Terminal Motor Connector Cables for Stepper Motors
9. YOTINO Bipolar Stepper Motor Cable,4 x 100cm Long NEMA 17 Extended Connector Cable for RepRap 3D Printer CNC Machines (XH2.54 4Pin-6Pin)
Feature
[Gauge/AWG] - 1M long stepper motor cable with 2 connectors[4Pin] - 4 pin Dupont black terminal connector of the driver side, compatible with RAMPS board and others
[6Pin] - 6 pin JST white terminal connector on stepper side, compatible with many stepper models
[Flexible & Solid Connectors] - Easy to rewire, swapping the pins around as needed and pins fit back in the housing without trouble, work better on the motor end
[Premium Material] - Environmental PVC material, corrosion resistance, high temperature, effective signal interference-free protection, pure copper core, conductive performance is more excellent
Description
YOTINO 4 x 100cm Bipolar Motor Cable NEMA 17 Used in RepRap 3D Printer CNC MachinesWARNING -
On some systems, the middle 2 wires on the motor side are swapped. This is easy to fix by slightly prying back the white nubs and swapping the wires. Otherwise they work fine.
How to Rewire
Gently pry those slightly up while gently pulling out the wire to release. Then simply push back in the right places.
Specification:
- Material: PVC
- Length: 100cm/pcs
- Color: As shown
- 100cm/1M with 2 connectors, 6 Pin JST connector on motor end, 4 Pin Dupont connector on controller end
APPLICATION: for the stepper motors used in 3D printer
Package Included:
4 x 100cm Bipolar Stepper Motor Cable