If you looking for inverter kr then you are right place. We are searching for the best inverter kr on the market and analyze these products to provide you the best choice.
Reviews
1. Aigh Auality shop 6632L-0211A - KLS-EE32CI-M REV.08-09 - INV 02,006 KR Card Inverter Master+Slave
Feature
6632L-0211A - KLS-EE32CI-M REV.08-09 - INV 02,006 KR Card inverter MASTER+SLAVEDescription
6632L-0211A - KLS-EE32CI-M REV.08-09 - INV 02,006 KR Card inverter MASTER+SLAVE2. uxcell 2 Pcs Aluminum Case Resistor 100W 2.5k Ohm Wirewound Green for LED Replacement Converter 100W 2.5k RJ
Feature
100 Wattage and 2.5k Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Description
100 Wattage and 2.5k Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3mmantisymmetricanchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Main Body Length: 59 mm/ 2.32 inches
Power: 100 Wattage
Rated Resistance: 2.5k R
Tolerances: 5%(J)
Connection Type: Rod terminals withhole
Rod Length: 12mm/0.47 inches
Screw Hole: 3mm(Fit #2 or M2.3 nuts)
Distancebetween screw hole: 45mm
Weight: 60g/2.12 Oz
Materials: Nickel alloys Wire Wound Resistor with Aluminum Case
Color: Green
Package Content:
2 x 100W 2.5KR Aluminum Housed Resistor
3. Aviation Plug 7 Pin Waterproof Aviation Plug Socket Wire Connector for Signal and Power
Feature
PRODUCT NAMEAviation connector plug;type : male female plugHIGH QUALITYPure copper pin, easy to plug and without stuck,greatly improve the number of plug in and out, and maintain the good conductivity,High quality shell: dustproof and splash -proof, oil proof and high temperature proof, vibration proof and impact proof.
SAFT TO USEThe whole plug is made of nylon raw material with high strength, high and low temperature resistance and flame retardant,which is built to stand up to the toughest conditions; Adapter is designed with grooves to hold tightly for a non-slip grip.
WITH LONG SERVING LIFESuitable for NB(KR/KH)-250/350/500/600 or inverter 350/500/630, etc welding machine control wire.the number of pluggable is more than 20000 times.
QUICK AND CONVENIENTRotary buckle design,for fast connection and fast separation.
Description
Features:Metal contact Angle: excellent contact Angle, beautiful and elegant, safe and durable High quality shell: dustproof and splash -proof, oil proof and high temperature proof, vibration proof and impact proof Quick and convenient: rotary buckle design, for fast connection and fast separation Nylon raw material: the whole plug is made of nylon raw material with high strength, high and low temperature resistance and flame retardant. Pure copper pin: with strong conductive performance, smooth surface, Soft contact technology, easy to plug and unplug without stuck. Suitable for NB(KR/KH)-250/350/500/600 or inverter 350/500/630, etc welding machine control wire
Specification:
Product name: 7 pin aviation plug
Current: 63A
Weight: Approx.129g/4.6oz
Note:
The long part is the plug and the short part is the socket
4. uxcell Aluminum Case Resistor 100W 4.7K Ohm Wirewound Yellow for LED Replacement Converter 100W 4.7KRJ
Feature
100 Wattage and 4.7K Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Description
Description:1. 100 Wattage and 4.7K Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
2. Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
3. This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
4. Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding.
5. Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Specification:
Main Body Length: 59 mm/ 2.32 inches
Power: 100 Wattage
Rated Resistance: 4.7K R
Tolerances: 5%(J)
Connection Type: Rod terminals with hole
Rod Length: 12mm/0.47 inches
Screw Hole: 3.2mm
Distance between screw hole: 45mm
Weight: 30g/1.05 Oz
Materials: Nickel alloys Wire Wound Resistor with Aluminum Case
Color: Yellow
Package Content:
1 x 100W 4.7K R Aluminum Housed Resistor
5. uxcell Aluminum Case Resistor 100W 4.7K Ohm Wirewound Yellow for LED Replacement Converter 100W 4.7KRJ 2pcs
Feature
100 Wattage and 4.7K Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Description
Description:1. 100 Wattage and 4.7K Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
2. Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
3. This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
4. Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding
5. Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Specification:
Main Body Length: 59 mm/ 2.32 inches
Power: 100 Wattage
Rated Resistance: 4.7K R
Tolerances: 5%(J)
Connection Type: Rod terminals with hole
Rod Length: 12mm/0.47 inches
Screw Hole: 3.2mm
Distance between screw hole: 45mm
Weight: 60g/2.10 Oz
Materials: Nickel alloys Wire Wound Resistor with Aluminum Case
Color: Yellow
Package Content:
2 x 100W 4.7K R Aluminum Housed Resistor
6. Akozon 7Pin Aviation Plug Socket Wire Connector for Signal and Power Waterproof
Feature
Metal contact Angle: excellent contact Angle, beautiful and elegant, safe and durableHigh quality shell: dustproof and splash -proof, oil proof and high temperature proof, vibration proof and impact proof
Quick and convenient: rotary buckle design, for fast connection and fast separation
Nylon raw material: the whole plug is made of nylon raw material with high strength, high and low temperature resistance and flame retardant.
Pure copper pin: with strong conductive performance, smooth surface, Soft contact technology, easy to plug and unplug without stuck. Suitable for NB(KR/KH)-250/350/500/600 or inverter 350/500/630, etc welding machine control wire
Description
Specification:Product name: 7 pin aviation plug
Current: 63A
Weight: Approx.129g/4.6oz
Note:
the long part is the plug and the short part is the socket
