Finding the best storm32 3 axis gimbal suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Storm32 BGC V1.32 3 - Axis Gimbal Controller with MPU6050 Sensor
Feature
Item name Storm32 BGC V1.32 3 axis brushless gimbal controllerSensor MPU6050
Three-axis gimbal driver
Voltage 12 - 16 V Camera Gimbal Brushless Gimbals
Description
Main Features:Item name: Storm32 BGC V1.32 3 axis brushless gimbal controller
Sensor: MPU6050
Three-axis gimbal driver
Voltage: 12 - 16 V Camera Gimbals: Brushless Gimbals
Array
Package weight: 0.073 kg
Package size (L x W x H): 8.00 x 7.00 x 2.50 cm / 3.15 x 2.76 x 0.98 inches
Package Contents: 1 x BGC, 1 x Sensor
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Disclaimer:
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.
2. 3-Axis Brushless Gimbal Camera Mount with 32bit Storm32 Controller for Gopro 3 4 FPV Black
Feature
- Simple structure and light weight,CNC aluminum alloy structure - Brushless motor direct drive - With anti-vibration rubber balls,easy to adjust- Compatible with Gopro 4 3,2,1 - With 3pcs 2804 160t motor - With 32bit Storm32 firmware gimbal controller, sensor - With motor protector which can help heat dissipation
Specification: - Power supply: 9-15V(3-4S) - Drive current: Max.1.5A - Height: 11cm - Color: Black
Gimbal activity angles: -YAW rotation angle : + -100 -ROLL angle : + -40 -PITCH angle : + -90
This gimbal reserves holes for installing hooks as below (not included) , you can buy the hooks (8mm/10mm/12mm) on your own needs.
Description
- The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.- This version of the controller is our new direction in the development of the stabilizing solutions.
- It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-compatibility, but adding the new fuctionality.
- 32-bit MCU - ARM Cortex M4.
- Effectively calculates the complex tasks for 3-axis stabilization,700 times/seconds gyro caculates
- Allows camera control with the RC or analog joystick.
- Use several switchable profiles for different modes of operation
- Control Pitch or roll by PWM or receiver,supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
- Use IMU1 and on board IMU2 dual sensor modulelock YAW accuratly, stable performance
- Support follow mode,lock mode,absolute mode or speed mode
Package included:
- 1 x Aluminum gimbal installed 3 motors
- 1 x 32bit Storm32 Gimbal controller
- 1 x Sensor
- Wiringc
ATT: This gimbal reserves holes for installing hooks as below (not included) , you can buy the hooks (8mm/10mm/12mm) on your own needs.
3. JALITE Black 3D 3 Axis Brushless Gimbal Storm32 Controller FPV Drones Gopro Camera F450 F550 DIY Quadcopter
Feature
Pitch Roll Yaw 3 Axis Brushless GimbalSimple structure and light weight,CNC aluminum alloy structure
Brushless motor direct drive
With anti-vibration rubber balls,easy to adjust
With 32bit Storm32 firmware gimbal controller, sensor
Description
Specification- Power supply: 11.1-16.8V(3-4S)
- Working current: 350mA
- Color: Black
-Size:80*80*100mm
-Weight:180g
-Compatible camera:Gopro 3 4,SJ4000,SJ6000,SJ7000,XiaoYi,Sharp vision
-Compatible drone:Phantom 1,2,3,F450,F550,Tarot 650,Tarot690S,cheerson CX-20,WL toy V303 and other drones
Features:
- Simple structure and light weight,CNC aluminum alloy structure
- Brushless motor direct drive
- With anti-vibration rubber balls,easy to adjust
- Compatible with Gopro 4 3,2,1
- With 32bit Storm32 firmware gimbal controller, sensor
- With motor protector which can help heat dissipation
Strom32 Gimbal Controller
Features:
- The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.
- This version of the controller is our new direction in the development of the stabilizing solutions.
- It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-compatibility, but adding the new fuctionality.
- 32-bit MCU - ARM Cortex M4.
- Effectively calculates the complex tasks for 3-axis stabilization,700 times/seconds gyro caculates
- Allows camera control with the RC or analog joystick.
- Use several switchable profiles for different modes of operation
- Control Pitch or roll by PWM or receiver,supports variety of RC protocols: PWM, Sum-PPM, sp ektrum and s-bus.
- Use IMU1 and on board IMU2 dual sensor module, lock YAW accuratly, stable performance
- Support follow mode,lock mode,absolute mode or speed mode
4. Fityle Storm32 - BGC NT 32-bit 3-axis Brushless Gimbal Controller Board V1.3_F103RC
Feature
Item name: Storm32BGC NT 32-bit Gimbal Control BoardVersion: V1.3_F103RC
Power Supply: 3S 12V
Easy to wash and oven safe for baking or reheating.
Sensor: NT Sensor
Description
We are one manufacturer of consumer electronics , we produce product with good quality and price. We attach great importance to each feedback from cu
Description:
- Item name: Storm32BGC NT 32-bit Gimbal Control Board
- Power Supply: 3S 12V
- Version: V1.3_F103RC
- Sensor: NT Sensor
- Using serial port IMU to effectively prevent I2C error probability
- Using newest program o323bgc_v211e_nt_storm32bgc_v130_f103rc
Size Chart:
Size: 5 x 5cm M3 screw hole, 45mm pitch
Package Includes:
1 Piece Brushless Controller
1 Piece Controller Case
1 Piece MPU6050 Sensor
1 Piece Pin Header
5. MooMax Brushless Gimbal Controller Storm32 BGC 32Bit 3-Axis Brushless Gimbal Controller V1.31 DRV8313 Motor Driver RC Quadcopter
Feature
Motor driver: DRV8313 with short circuit,overheat protection.Onboard gyro and acceleration sensor MPU6050.
Processor: STM32F103RC at 72Mhz.
IR LED Interface,Each axis could connect analog joystick.
Spektrum satellite port,7CH PWM/Sum-PPM input/output.
Description
Features:- Processor: STM32F103RC at 72Mhz
- Motor driver: DRV8313 with short circuit, overheat protection
- Onboard gyro and acceleration sensor MPU6050
- IR LED Interface
- Futaba S-BUS
- Spektrum satellite port
- 7CH PWM/Sum-PPM input/output
- Each axis could connect analog joystick
- With I2C port, could use external 6050 to replace onboard sensor
- 3* AUX port
Specifications:
- Power supply: 9-18V(3-4S)
- Drive current: Max.1.5A
- Dimension: 5-5cm, M3 screw hole, 45mm pitch
- Weight: 28g
Package Included:
- Strom32 3-Axis gimbal controller DRV8313 Driver
- Sensor
6. Detectoy Storm32 BGC 32Bit 3-Axis Brushless Gimbal Controller V1.31 DRV8313 Motor Driver
Feature
100% brand new and high qualityUniversal handlebar design, can be fit on most of motorcycles
Can be used as ON/OFF switch for general lights, hazard light, 70cm wire, you can fit it on anywhere on your motorcycle
and power outlet for mobile devicesWith two connectors, easy to install
Can be used on motorcycleWhen used as hazard light switch, you need to connect to hazard
Description
Features:- Processor: STM32F103RC at 72Mhz
- Motor driver: DRV8313 with short circuit, overheat protection
- Onboard gyro and acceleration sensor MPU6050
- IR LED Interface
- Futaba S-BUS
- Spektrum satellite port
- 7CH PWM/Sum-PPM input/output
- Each axis could connect analog joystick
- With I2C port, could use external 6050 to replace onboard sensor
- 3* AUX port
Specifications:
- Power supply: 9-18V(3-4S)
- Drive current: Max.1.5A
- Dimension: 5-5cm, M3 screw hole, 45mm pitch
- Weight: 28g
Package Included:
- Strom32 3-Axis gimbal controller DRV8313 Driver
- Sensor
7. SODIAL 3 Axis RC Drone FPV Accessory Brushless Gimbal W/ Motors & 32 bit Storm32 Controller for Gimbal Gopro 3 / Gopro 4
Feature
Use: Vehicles & Remote Control ToysUpgrade Parts/Accessories: Universal Joint
Four-wheel Drive Attributes: Motors
For Vehicle Type: Airplanes
Tool Supplies: Battery
Description
* SODIAL is a registered trademark. ONLY Authorized ller of SODIAL can ll under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) 3 Axis RC Drone FPV Accessory Brushless Gimbal W/ Motors & 32 bit Storm32 Controller for Gimbal Gopro 3 / Gopro 4
Model Number: HAKRC Storm32 3 Axis Brushless Gimbal
Technical parameters: Value 3
Remote Control Peripherals/Devices: Camera
RC Parts & Accs: Gimbal
Type: FPV Fittings
Item Name: Storm32 3 Axis Brushless Gimbal
Storm32 board version: V 1.32
Compatible: Gopro3 Gopro4
Input voltage: 3 - 4S ( 11.1 - 16.8V )
FPV Equipments: Gimbal
Camera Gimbals: Brushless Gimbals
colour: black
Material: Aluminum alloy
Package Contents:
1 x brushless PTZ testing version
Only the above package content, other products are not included.
Note: Light shooting and different displays may cau the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
8. Toogoo 3 Axis RC Drone FPV Accessory Brushless Gimbal W/ Motors & 32 bit Storm32 Controller for Gimbal Gopro 3 / Gopro 4
Feature
Use: Vehicles & Remote Control ToysUpgrade Parts/Accessories: Universal Joint
Four-wheel Drive Attributes: Motors
For Vehicle Type: Airplanes
Tool Supplies: Battery
Description
* TOOGOO is a registered trademark. ONLY Authorized ller of TOOGOO can ll under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) 3 Axis RC Drone FPV Accessory Brushless Gimbal W/ Motors & 32 bit Storm32 Controller for Gimbal Gopro 3 / Gopro 4
Model Number: HAKRC Storm32 3 Axis Brushless Gimbal
Technical parameters: Value 3
Remote Control Peripherals/Devices: Camera
RC Parts & Accs: Gimbal
Type: FPV Fittings
Item Name: Storm32 3 Axis Brushless Gimbal
Storm32 board version: V 1.32
Compatible: Gopro3 Gopro4
Input voltage: 3 - 4S ( 11.1 - 16.8V )
FPV Equipments: Gimbal
Camera Gimbals: Brushless Gimbals
colour: black
Material: Aluminum alloy
Package Contents:
1 x brushless PTZ testing version
Only the above package content, other products are not included.
Note: Light shooting and different displays may cau the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
9. Strom32 3-Axis Gimbal Controller DRV8313 Driver, Storm32 BGC 32Bit 3-Axis Brushless Gimbal Controller V1.31 DRV8313 Motor Driver
Feature
- Processor: STM32F103RC at 72Mhz- Motor driver: DRV8313 with short circuit, overheat protection
- Onboard gyro and acceleration sensor MPU6050
- IR LED Interface
- Futaba S-BUS - Spektrum satellite port - 7CH PWM/Sum-PPM input/output
Description
Features:- Processor: STM32F103RC at 72Mhz
- Motor driver: DRV8313 with short circuit, overheat protection
- Onboard gyro and acceleration sensor MPU6050
- IR LED Interface
- Futaba S-BUS
- Spektrum satellite port
- 7CH PWM/Sum-PPM input/output
- Each axis could connect analog joystick
- With I2C port, could use external 6050 to replace onboard sensor
- 3* AUX port
Specifications:
- Power supply: 9-18V(3-4S)
- Drive current: Max.1.5A
- Dimension: 5-5cm, M3 screw hole, 45mm pitch
- Weight: 28g
Package Included:
- Strom32 3-Axis gimbal controller DRV8313 Driver
- Sensor
10. Digital Volt Ampere Meter, Storm32 BGC 32Bit 3-Axis Brushless Gimbal Controller V1.31 DRV8313 Motor Driver
Feature
Features:Made from premium material, flame retardant and safe to use.
US or EU to AU Power Plug Converter Adapter is in new condition.
Compact and lightweight.
Really convenient to use, meets all your needs everywhere.For using American Europen devices in Australia.Perfect for travel.
Description
Features:
Operating voltage:DC 4.5 ~ 30V
Measure voltage: DC 0 ~ 100V
Minimum resolution(V): 0.1V
Measure current :DC 50A (require external shunt)
Minimum resolution(A): 0.1A
Operating Current:<20mA
Display: three 0.28"" LED digital tube
Display color: Red (dual display)
Dimensions: 48 x 29 x 21mm
Mounting cutout: 45.5 x 26.5mm
Refresh rate: about 500mS / times
Measure accuracy: 1% ( 1 digit)
Operating temperature: -10 to 65 c
Operating Humidity: 10 to 80% (non-condensing)
Working pressure: 80 to 106 kPa
Wiring:
Black line (thin): vacant or buck circuit (module) negative
Red line (thin): power supply+
Black line (thick): COM, common measuring
Red line (thick): PW+, measuring terminal voltage input positive
Yellow line (thick): IN+, current input+
(Please refer to the wiring diagrams for more details)
Notice:
The voltage between the thin red and thin black lines must be within DC 4.5-30V
The ammeter can only be connected to the negative of the device under test
Exceeds 5A, long-term full load working continuously, it is recommended that the measurement side of the leads are directly soldered to the socket
When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits
If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing
Package include:
1x Digital Volt Ampere Meter
1 x Cable