Finding your suitable 5pcs atmega328p is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best 5pcs atmega328p including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. KOOKYE 5PCS Nano V3.0 ATMEGA328P Module CH340G 5V 16M Mini USB Micro-controller Board for Arduino(Nano5)
Feature
The Arduino Nano is a compact board similar to the UNO.The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Each of the 14 digital pins on the Nano can be used as an input or output.They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions.
The Nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference() function. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality.
The Arduino Nano has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers.Such as UART TTL (5V) serial communication and I2C (TWI) and SPI communication
Description
More Download Information: www.kookye.com/?p=6382
--The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x).
--The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
--The ATmega328 has 32 KB, (also with 2 KB used for the bootloader). The ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.
--Specification--
MicrocontrollerAtmel Atmega328P-AU MCU
Operating Voltage (logic level)5 V
Input Voltage (recommended)7-12 V
Input Voltage (limits)6-20 V
Digital I/O Pins14 (of which 6 provide PWM output)
Analog Input Pins8
DC Current per I/O Pin40 mA
Flash Memory16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM2 KB (ATmega328)
EEPROM1 KB (ATmega328)
Clock Speed16 MHz
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
CH340G Driver Download link : http://www.wch-ic.com/download/list.asp?id=126 OR http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software
Dimensions0.73" x 1.70"
Length45 mm
Width18 mm
Weigth5 g
Package:
5x Nano Board
2. TOOGOO 5PCS Nano V3.0 ATmega328P controller compatible for arduino nano CH340 USB driver NO CABLE NANO 3.0
Feature
CH340G Replace FT232RLMicro-controller ATmega328P
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
Support for external 5V ~ 12V DC power supply;
Support power supply by 9V battery.
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) 5PCS Nano V3.0 ATmega328P controller compatible for arduino nano CH340 USB driver NO CABLE NANO 3.0
Material: ccl
COLOR: blue
Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz
Note:
This version is not included the USB cable.
Had change the USB chip, improve the download speed and stability of WIN7/WIN8
Package includes:
5 x Nano V3.0 ATMEGA328P Module Board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
3. Topsame 30pcs/lot (5PCS ATMEGA328P-PU +5PCS DIP Socket +5PCS 16MHz Crystal K)
Description
30pcs/lot (5PCS ATMEGA328P-PU +5PCS DIP Socket +5PCS 16MHz crystal K)4. BephaMart 5Pcs DIP28 ATmega328P-PU MCU IC Chip With Arduino UNO Bootloader
Feature
Feature: Core version: UNOXTL: Outside 16MHZ Working voltage: 5V
Description
5Pcs DIP28 ATmega328P-PU Microcontroller IC Chip With Arduino UNO BootloaderFeature:
Core version: UNO
XTL: Outside 16MHZ
Working voltage: 5V
Note:
Suitable for Arduino UNO R3 and Arduino 2011 UNO development board.
Package included:
5 x ATmega328P-PU Microcontroller
5. LILIERS 5pcs Nano V3.0 ATmega328P controller compatible for arduino nano CH340 USB driver NO CABLE NANO V3.0
Description
5pcs Nano V3.0 ATmega328P controller compatible for arduino nano CH340 USB driver NO CABLE NANO V3.06. 5PCS MINI USB Nano V3.0 ATmega328P controller compatible for arduino nano CH340 USB driver NANO 3.0
Description
Type:LogicICs Condition:New SupplyVoltage:standard DissipationPower:standard OperatingTemperature:standard is_customized:Yes Application:NANO7. Arduino Compatible SCM & DIY Kits Module Board - 5Pcs ATmega328P Nano V3 Controller Board Compatible Improved Version -5 x No welding Arduino Compatible Nano V3.0 Board
Feature
Operating Voltage (logic level): 5VInput Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
Description
Specification: Microcontroller Atmel ATmega328Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz
Note:
Improved USB chip for speed and stability using WIN7/WIN8. This version comes with the pin headers unsoldered and not included the USB cable.
Package included:
5 x No welding Compatible Nano V3.0 Board
8. Aideepen 5pcs Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module for Arduino
Feature
Designed for Arduino Nano V3.0The item is a terminal expansion adapter, working very well for prototyping Arduino Nano projectsFinished ProductThese boards are fully assembled. No soldering required. Size is about 2.21" x 1.65" x 0.50" (L* W* H)
Nice Platform for Wiring CircuitsIt provided a nice platform for wiring circuits to Arduino Nano.It can connect a large number of digital lines to Arduino while maintaining the footprint of the original Nano
Easy to UseYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard
Little TipsIt lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). Any questions, you can contact me by email at any time
Description
This is a small and simple Arduino nano expansion board.It will lead out all the Nano pins, it is convenient for us to wiring and experiment.
Features:
Great for temporary things you don't want to solder.
It provided a nice platform for wiring circuits to an Arduino Nano. It can be used in conjunction with or in place of a breadboard.
It lets you make a temporary circuit without the reliability issues you get with prototyping boards, but maybe need a bit more effort.
You need to use your Nano to hold the black pin headers straight and flat during soldering.
Size: about 2.21" x 1.65" x 0.50" (L* W* H)
Package Included:
5 x Nano Terminal Adapter Expansion Boards
9. Keywish Nano Terminal Expansion Adapter Board for Arduino Nano V3.0 AVR ATMEGA328P (5PCS)
Feature
The item is a terminal adapter for Arduino Nano,working very well for prototyping Arduino Nano projectsYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires
It can connect a large number of digital lines to an Arduino while maintaining the footprint of the original Nano
It lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)
High Quality and Brand New
Description
Use this dock to add extra connections to your Nano! It uses screw terminals so that you can be sure the connection is strong, and also use thicker/stranded wires. working very well for prototyping Arduino Nano projects.Package Included: 5 X Nano Terminal Expansion Adapter Board10. FidgetGear 5PCS CH340G USB Nano V3.0 ATmega328P 5V 16M Micro-Controller Board Arduino+Cable
Description
Feature:
CH340G Replace FT232RL
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is bootloader installed in it
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
Driver download here or download from here
Package Included:
5x Nano V3.0 with ATMEGA328P CH340G Module
5x Usb cable
