Finding your suitable db9 case is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best db9 case including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Wahhing RS232 serial port connector DB9 Male socket Plug connector 9 Pin copper RS232 COM adapter with Plastic Case DIY 5 Set/lot
Feature
100% Brand New and High Quality.Case Size:41mm*31mm*16mm.
Applicable Cable Diameter:7mm.
Color:Grey.
5 Set/lot
Description
Safety Guide:Keep away from small children.
This products are only suitable use indoors.
Please read your use guideline of the manual carefully before installing and using it
Package Contents:
5 x Set/lot RS232 DB9 Male socket
WARNING!!
To ensure your safety and proper operation of the equipment, we recommend that you should fully understand the operation and safety features of the equipment.
Replacement parts, Always shut off power to the circuit before starting installation work.
initial operation, Do not run the equipment Unattended state.
if the other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
To ensure the users will use the product safely and properly, Please read your manual first and follow the instructions step by step before using the product.
Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.
2. Connector DB9 RS232 D-SUB Male Adapter 9-pin Port Adapter to Terminal Connector Signal Module with case(Male Connector, DB9 5+5 with case A)
Feature
Product name : DB9 adapter; terminal wire range : 12-24AWGDesign : Screw Type;Total Size : 58 x 35 x 21mm/2.3" x 1.4" x 0.83"(L*W*H)
Cable Hole Dia. : 5mm/0.2'' 6mm/0.23'' 7mm/0.27'' 10mm / 0.4";Material : Metal,Electric Part
Color : Black, Green;Weight : 30g
Package Content : 1 x DB9 Adapter With case and 3 x Protective cover
Description
Product name : DB9 Male adapter;
Total Size : 46 x 34 x 20mm/1. 8" x 1. 2" x 0. 71"(L*w*h)
Fixing Hole diameter : 3mm; fixing Hole center distance : 6mm/0. 24 inch
Material : metal Nickel plated copper needle, electric part; color : black, Green
Weight : 27G
DB9 male / female connector to screw terminals. High quality RoHS compliant assembly.
Wire range: 26-16AWG
Connect type: male with Case
Material:
Base: copper base and plastic part
Torque: 0.2Nm (1.7Lb-In.)
Pin header and cage: Brass
Case: ABS + PC
Package included:
1 x DB9 breakout board male adapter with case
2x Metal cable pressing plate
2x Screws
2x Long bolts
3x Wire cover
3. Twinkle Bay DB9 Connector to Wiring Terminal RS232 Serial Port Breakout Board Solderless (Female Adapter with Case)
Feature
Case can be prevent short circuitsAll-copper base, contacted better and more antioxidative
All signal ports named and labeled clearly
High quality PCB carrier, FR-4 fiber glass PCB.
Compliant assembly, 100% new, quality multiple checked before fulfilled.
Description
Net weight: 30g/1ozPCB dimensions(L x W): 1.3 x 1.18''/33 x 30mm
External dimension (L x W x H): 1.7 x 1.3 x 0.79"/43 x 34 x 20mm
Wire range: 26-16AWG
Rated current: 10A
Connect type: Female with Case
Material:
Base: copper base and plastic part
Torque: 0.2Nm (1.7Lb-In.)
Screws: steel, Cr3+ Zn plated
Pin header and cage: Brass
Case: ABS+PC
Package included:
1 x DB9 breakout board male adapter with case
1x Nylon cable pressing plate
2x Screws
2x Long bolts
4. TwinkleBay DB9 Connector to Wiring Terminal RS232 Serial Port Breakout Board Solder-free (Male Adapter with Case x1, Female Adapter with Case x1)
Feature
Case can be prevent short circuitsAll-copper base, contacted better and more antioxidative
All signal ports named and labeled clearly
High quality PCB carrier, FR-4 fiber glass PCB.
Package included: DB9 female adapter with case x 1, DB9 male adapter with case x 1
Description
Net weight: 30g/pcsPCB dimensions(L x W): 1.3 x 1.18''/33 x 30mm
External dimension (L x W x H): 1.7 x 1.3 x 0.79"/43 x 34 x 20mm
Wire range: 26-16AWG
Rated current: 10A
Connect type:
Female with Case x 1
Male with Case x 1
Material:
Base: copper base and plastic part
Torque: 0.2Nm (1.7Lb-In.)
Screws: steel, Cr3+ Zn plated
Pin header and cage: Brass
Case: ABS+PC
Package included:
1 x DB9 breakout board female adapter with case
1 x DB9 breakout board male adapter with case
2x Nylon cable pressing plates
4x Screws
4x Long bolts
5. Connector DB9 RS232 D-SUB Female Adapter Serial 9 Pin Port DB9 COB Breakout Terminal Connector Signal Module with Case (Female with Screw) (Female Connector + Nut)
Feature
1. Material : Metal, Electric Part. Case can be prevent short circuits.2. Convenient: No soldering needed. Cable Hole Diameter: 10mm / 0.4".
3. DB9 Connector COM port connector RS232/485 plug.
4. Size : 48 x 34 x 20mm/1.92 x 1.36 x 0.8inch(L*W*H). Weight : 28g.
5. Widely Application: Suitable for pin connections required to use serial communications, such as Industrial control equipment, Cash register, Computer, Tax control machine, Industrial instrument, Automation control equipment
Description
Product name : DB9 9-Pin Female Adapter RS232 Serial Port DB9 Connector to Wiring Terminal Solderless with Case (Female with Nut)
Description:
Size : 48 x 34 x 20mm/1.92 x 1.36 x 0.8inch(L*W*H);
Weight : 28G;
Cable Hole Diameter: 10mm / 0.4".
Color : black, Green;
DB9 female connector to Nut terminals. High quality RoHS compliant assembly;
Wire range: 26-16AWG;
Connect type: Female with Case;
Whole nine lines cited, the board clearly marked positive number, wiring more convenient;
All-copper DB9 seat, anti-oxidation, exposure and better;
Material:
Base: copper base and plastic part
Pin header and cage: Brass
Case: ABS + PC
Widely application
1. Suitable for pin connections required to use serial communications industrial control products.
2. Industrial control equipment.
3. Cash register.
4. Computer.
5. Tax control machine.
6. Industrial instrument.
7. Automation control equipment.
Package included:
1 x DB9 breakout board Female adapter with case
1 x Line Clamp
2x Screws
6. XLX DB9 9 Pin Female to MaleD-SUBPlate Insert Type Connectors Serial to Terminal Board Signal RS232 Module Assortment Kit with A Clean Case Assortment Kit (Female/Male)
Feature
Package: 2pcs, 1 female connector. and 1 male connector.Color: Black and silver.
Suitable for PCB board or other computer electric connection.
When using, please pay attention to safety, and use under the conditions of safe permit.
This product contains sharp parts, please be careful to use.
Description
Product Specification:DB9 9 Pin Female RS232 Plate Insert Type SerialConnectors
Package: 2pcs.
Color: Black, silver and green.
Main material: Metal and plastic.
Pin header : Brass.
Interface type: Nickel plating female head.
Size: 43mmx 34mmx 20mm.
Number of needles: 9 pin.
Wire range: 26-16AWG.
Direction: 90 degrees.
Each adapter board is equipped with a dedicated housing, integrated protection circuit, without worrying about wiring exposure.
This product contains sharp parts, please be careful to use.
When using, please pay attention to safety, and use under the conditions of safe permit.
Package including:
1 x DB9 female adapter with case
1 x DB9 male adapter with case
4x Metal cable pressing plate
4x Screws
4x Long bolts
7. Yootop 2Pcs DB9 D-SUB Male Connector 9-pin Port Adapter to Terminal Connector Signal Module with case RS232 Port Breakout Board Cover 2 Row
Feature
High quality PCB carrier, FR-4 fiberglass PCB.The enclosure prevents short circuits and there is no longer any need to worry about cable exposure.
The names and markings of all signal ports are clear.
Copper base, good contact, strong anti-oxidation.
All nine lines cited, the board is clearly marked, the wiring is more convenient.
Description
Product Name : DB9 adapterExternal dimension (L x W x H): 1.7 x 1.3 x 0.79"/43 x 34 x 20mm
PCB dimensions(L x W): 1.3 x 1.18''/33 x 30mm
Rated current: 10A
Connect type: Male with Case
Material: Metal,Electric Part
Base: copper base and plastic part
Package included:
2 x DB9 breakout board male adapter with case
4x Metal cable pressing plate
4x Screws
Long bolts
Contact with us if you have any question. We are going to help you with our best.
8. Copapa DB9 9-Pin Male Adapter RS232 Serial to 3-Position Terminal Connector with Case (Female Connector, DB9 9P to 3-Position With case)
Feature
Product name : DB9 adapter; terminal wire range : 12-24AWGDesign : Screw Type;Total Size : 58 x 35 x 21mm/2.3" x 1.4" x 0.83"(L*W*H)
Cable Hole Dia. : 10mm / 0.4";Material : Female,Electric Part
Color : Black, Green;Weight : 30g
Package Content : 1 xDB9 Adapter With case
Description
Terminal spacing 3.96MM, screw hole diameter 2.0MM, disassemble is required to use the width 2.0MM Flat head screwdriver
Each adapter plate with special housing, comprehensive protection circuitry, no longer needto worry about wiring exposed;
Each of cleaning washer water clean and free of rosin flux residues;
Whole nine lines cited, the board clearly marked positive number, wiring more convenient;
All-copper DB9 seat, anti-oxidation, exposure and better;
9. Connector DB9 RS232 D-SUB Male Adapter Serial 9 Pin Port DB9 COB Breakout Terminal Connector Signal Module with Case (Male Connector +Nut)
Feature
1. Material : Metal, Electric Part. Case can be prevent short circuits2. Convenient: No soldering needed. Cable Hole Diameter: 10mm / 0.4".
3. DB9 Connector COM port connector RS232/485 plug.
4. Size : 48 x 34 x 20mm/1.92 x 1.36 x 0.8inch(L*W*H). Weight : 28g.
5. Widely Application: Suitable for pin connections required to use serial communications, such as Industrial control equipment, Cash register, Computer, Tax control machine, Industrial instrument, Automation control equipment.
Description
Product name : DB9 9-Pin Male Adapter RS232 Serial 9-Position Terminal Connector Solderless with Case (Male with Nut)
Description:
Size : 48 x 34 x 20mm/1.92 x 1.36 x 0.8inch(L*W*H);
Weight : 28G;
Cable Hole Diameter: 10mm / 0.4".
Color : black, Green;
DB9 Male connector to Nut terminals. High quality RoHS compliant assembly;
Wire range: 26-16AWG;
Connect type: Male with Case;
Whole nine lines cited, the board clearly marked positive number, wiring more convenient;
All-copper DB9 seat, anti-oxidation, exposure and better;
Material:
Base: copper base and plastic part
Pin header and cage: Brass
Case: ABS + PC
Widely application
1. Suitable for pin connections required to use serial communications industrial control products.
2. Industrial control equipment.
3. Cash register.
4. Computer.
5. Tax control machine.
6. Industrial instrument.
7. Automation control equipment.
Package included:
1 x DB9 breakout board Male adapter with case
1 x Line Clamp
2x Screws
2x Long bolts
3x Wire cover
10. Twinkle Bay DB9 Connector to Wiring Terminal RS232 Serial Port Breakout Board Solder-free (Male Adapter with Case)
Feature
Case can be prevent short circuits.All-copper base, contacted better and more antioxidative.
All signal ports named and labeled clearly.
High quality PCB carrier, FR-4 fiber glass PCB.
Compliant assembly, 100% new, quality multiple checked before fulfilled.
Description
Net weight: 30g/1ozPCB dimensions(L x W): 1.3 x 1.18''/33 x 30mm
External dimension (L x W x H): 1.7 x 1.3 x 0.79"/43 x 34 x 20mm
Wire range: 26-16AWG
Rated current: 10A
Connect type: Male with Case
Material:
Base: copper base and plastic part
Torque: 0.2Nm (1.7Lb-In.)
Screws: steel, Cr3+ Zn plated
Pin header and cage: Brass
Case: ABS+PC
Package included:
1 x DB9 breakout board male adapter with case
1x Nylon cable pressing plate
2x Screws
2x Long bolts
