Finding your suitable fan board is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best fan board including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Phobya Splitter PCB, 4-Pin (PWM) to 8x 4-Pin (PWM)
Feature
Power up to Eight 4-pin PWM Computer Fans (3-Pin fans are also compatible but there will be no PWM control)PWM/Tachometer output (4-pin PWM connector, PWM & Tachometer wires only)
4-Pin Molex Style Connector for Power (12V and Ground wires only)
Can be attached with pre-applied ahesive backing
Description
This PWM splitter from Phobya can supply up to 8 PWM fan with energy and also transfer the PWM signal of the first fan to all 8 fans. This makes sense for larger radiators. The splitter is very compact and easy to bring in the housing below. By the back board , the tape may be attached to any position in the casing, as well as the use of two screws on the outside by holes. Model: 81136.2. Emerson Ceiling Fan Light Fixtures LK40ORB Boardwalk Cage Ceiling Fan Light Kits, Medium Base CFL Light Kit, Oil Rubbed Bronze Ceiling Lamp
Feature
Three 9-watt medium base compact fluorescent bulbs includedAlso rated for three 60-watt incandescent bulbs Also rated for three 60-watt incandescent bulbs
Suitable for Damp and indoor listed fans
Limited one-year warranty
Description
This trendy boardwalk cage light fixture is a stylish lighting option for both indoor and outdoor fans. Available in oil rubbed bronze and Venetian bronze. Its included three 9-Watt medium base CFL bulbs is also rate for 3 60-watt incandescent.3. BAY Direct Heatsink Cooling fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin
Feature
Item: Heatsink Cooling fan for DaHua5V 2Wire 2Pin Fan
Warranty: 6 Months warranty.
Replacement and high quality.
All items are tested before shipping.
Description
FeatureVoltage:5V
2Wire 2Pin
Package:
1 * DaHua DVR HDCVI Camera Fan
1 * Warranty Card
4. Heatsink fan for DaHua DVR Fan,HDCVI Camera Fan,DAHUA DVR 5V motherboard fan, 5V DAHUA Fan, 2Wire 2Pin Cooler Fan (shell fan)
Feature
5V 2Wire FanSize: 45*45mm
HDCVI fan
DaHua fan
HD DVR FAN
Description
Voltage:5V
Hole Size:45*45mm
Line: 2Wire
Remark:ship it from china within 24hours via ePacket ,then you can get it about 5~10days or so.
5. AC Infinity AIRPLATE T8 PRO, Quiet Cooling Dual-Fan System 6" with Thermostat Control, for Home Theater AV Cabinets
Feature
An ultra-quiet dual-fan system designed for cooling cabinets that requires minimal noise.Features an on-board processor that provides a digital read-out of the cabinet's temperatures.
Programming includes thermostat control, fan speed control, and SMART energy saving mode.
Two fan units with controller, containing CNC machined aluminum frames with a modern brushed black finish.
Each Unit's Dimensions: 6.3 x 6.3 x 1.3 in | Total Airflow: 104 CFM | Total Noise: 19 dBA | Bearings: Dual Ball
Description
OverviewThe ultra-quiet fan system is designed to cool home theaters, entertainment centers, and audio video cabinets. This kit includes two single fan units, one exhaust and one intake. plus a thermal controller. Each fan uses a custom motor engineered to minimize noise during speed variations and are certified by CE and RoHS. Containing dual ball bearings rated at 67,000 hours, the unit can be mounted in any direction. Features a CNC machined aluminum frame with a modern brushed black finish. Fans are set to exhaust air out the frame but this can be reversed to intake air using a screw driver. Includes all necessary hardware to easily mount the unit onto a cabinet and power it through a standard wall outlet.
Thermal ControllerThe thermal controller features an on-board processor that provides a digital read-out of the cabinet's temperatures. Programming includes an easy-to-use thermostat mode, fan speed control, and a SMART mode that automatically adjusts the fan's speed to react to surrounding temperatures. Includes a back-lit LCD display with back up memory to recover your settings during power failures.
Connecting Additional UnitsFor cabinets that requires more airflow, additional AIRPLATE S series cabinet fans can be connected to the included thermal controller. Up to six fans can share the same thermal controller or wall outlet power source. AIRPLATE S3/T3 contains one fan, AIRPLATE S7/T7 contains two fans, and AIRPLATE S9/T9 contains three fans.
ApplicationsThis ultra-quiet cooling system is popular in a variety of applications including home theaters, entertainment centers, and audio video cabinets; and smaller enclosures and racks holding computers, receivers, amplifiers, and other AV equipment.
6. Yeeco DC DC 10-60V to 13-97V Boost Voltage Regulator Power Converter 1500W 22A Volt Transformer Power Supply Module Board with Adjustable Potentiometer & Heatsink Fan
Feature
DC 10-60V to 13-97V adjustable DC DC step up voltage regulator boardWith CV, CC adjusting potentionmeter and UVP(under voltage protection)
22A maximum output current and 1500W max output power
Size: 130x51x80mm (Length x Width x Height)
Heatsink for heat dissipation and copper wire winding inductance for filtering AC
Description
Parameter:
Input voltage range: DC 10-60V (Typical: 48V)
Output voltage range: DC 13-97V (Typical: 84V)
Input current: 35A (40V MAX)
Output current: 22A MAX
Dynamic response speed: 300us (working condition: 5% load current change)
Conversion efficiency: 48V to 60V 8A--98.1%; 48V to 72V 8A--98.1%; 48V to 84V 8A--97.6%;
Outputshort-circuit protection: Yes
Input reverse connection protection: Yes
Working temperature: -20-65
Storing temperature: -40-125
What temperature will the fan start to work: 60
Weight: 400g
Package include:
1 x Boost Power Converter
7. Electop Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Fan Hub Molex Controller
Feature
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
Description
Theoretically system can control the fan speed connecting with the red port.The motherboard can read the RPMs of the fan that's plugged into the red port.
The speed of the fan connected to the red fan port on this board is controlled by the computer's operating system and NOT manually controlled.
The other 9 black fan ports CAN NOT be adjusted in speed. Because one operating system can only control speed of one fan.(The red Port)
Operating system control is based on the system detects the temperature of the CPU and other heating devices, automatically adjust the CPU fan speed.
the CPU port (the red port) would be the only one that could get controlled by the operating system and then the remaining black ports would just copy the power level of what the red port is at.
Package Include:
1x HUB
1x PWM connector
8. Electronic Line Voltage Non Programmable Single Pole: 2 Wire Wall Mount Digital Low temperature Thermostat Used To Operate Electric Heaters (Baseboard, Convection or Fan Forced Only). Controls up to 4000 Watts at 240 Volts or 2000 Watts at 120 Volts.
Feature
HIGH QUALITY: Simple to Use Electronic Non Programmable Single Pole ( 2 wire) Wall Mount ThermostatLOW TEMPERATURE THERMOSTAT: 37 to 86F Temperature Range
DIGITAL THERMOSTAT: Controls up to 4000 Watts at 240V or 2000 Watts at 120V
SINGLE PROGRAMMING: Option 1 Day & 1 Night Time Temp if Desired, or Manually Adjust Temp as Needed
3-Year Warranty
Description
Line voltage thermostat single pole two wireDoes not require any programming
Night temperature lowering
Frost-free warning and Off position
Display in either Fahrenheit or Celsius
Features a night setback mode allowing you the option to program an alternate temperature setting for a specified duration, at the end of which the thermostat returns to its regular daytime setting. This cycle repeats itself automatically every 24 hours from the moment it was programmed. No resetting is required as the unit reacts like a programmable thermostat.
Works as an electric heater thermostat
CSA certified.
User Manual Included
3 Year Warranty
What does it mean by 4000 watt thermostat?
1. You can control a 300w to 4000 watt electric heater running on 240 volts
2. Or you can control four 1000 watt electric heaters running on 240 volts for example.
As long as your total wattage is below 4000 watts or 16.7 amps this this thermostat should work.
If you have a 120 volts you can control up to total 2000 total watts of electric heaters
Example:1. One 1500 watt electric wall heater
or
2. Two 1000 watt electric heater running on 120 volts.
As long as your total wattage is below 2000 watts or 16.7 amps this linr voltage thermostat should work.
9. GIGABYTE Z370 AORUS Gaming 5 (Intel LGA1151/ Z370/ ATX/ 3xM.2/ Onboard AC WiFi/Front USB 3.1/ RGB Fusion/Fan Stop/SLI / Motherboard)
Feature
Supports 8th Generation Intel Core ProcessorsUSB3.1 Gen2 with USB Type-C
Front USB 3.1 Type-C header
Intel Gigabit LAN + Intel 802.11ac WIFI onboard
RGB FUSION with Multi-Zone LED Light Show Design
Description
Supports 8th Generation Intel Core Processors Dual Channel DDR4, 4DIMMs USB 3.1 Gen 2 Type C 3-Way Graphics Support with Dual Armor and Ultra Durable Design Intel Gigabit LAN USB DAC-UP 2 with Adjustable Voltage USB RGB FUSION with Multi-Zone LED light Show Design Gigabyte UEFI Dual BIOS APP Center Including Easy Tune and Cloud Station Utilities, ATX Form Factor. 305mm X 244mm.10. Kuman 9 in 1 Complete Kit for Raspberry Pi 3 2 Model B B+,9 Layer Case + 5V/2.5A Power Supply+Micro USB with On/Off Switch+GPIO Breakout Expansion Board+Ribbon Cable +Heatsinks+Fan Cooling+Fan Cover
Feature
Easy Set-up:For Raspberry Pi 3 2 Model B B+,9 Layer Acrylic case protects your Pi board and easy to assemble.(No tools needed)Double Cooling:3pcs Aluminum Heatsinks improves the CPU/LAN/RAM chips ventilation ability,Case with Fan and fan cover,spins quietly which avoid overheating.
Simple Operation:Easily insert/remove SD card,allows Breakout cable,HDMI cable and other ports for RPi access at the same time.Various Ports for Pi 3&2 Case,which won't interrupt the bluetooth signal.
No Plug No Fuss:Easy to control the charging of Pi 3 with ON/OFF Switch Cable.(Not support data transfer)
5V/2.5A Power Supply:Enough power tested with all versions of the RPi board and USB devices.
Description
Description:*9 Layer acrylic case:It is made of high quality acrylics,so it has good durability.
*GPIO Expansion Board:This is in a fancy T-shape,which is not so compact, but it's a little easier to read the labels.
*Ribbon cable:Comes with a 40 pin ribbon cable and assembled T-Type Plus GPIO Expansion Board.You can plug the 40-pin GPIO cable between the Pi computer and the T Type Plus GPIO expansion board.
*Heatsink:It gives high cooling effect on Raspberry Pi when it's working and the temperature of RPi can be lowered to about 40C after using it.
*Screwdriver:Screws are easily collected because it has magnetism.Non-slip plastic coated handle is ideal for daily use,it's suitable for maintenance work of screws.
Package Included:
1 x RedSliced9layercase
1 x 5V/2.5A Power supply adapter
1 x Micro USB cable with switch
1 x Mini fan
1 x Fan cover
1 x Screwdriver
1 x GPIO Breakout Expansion Board
1 x Ribbon Cable
3 x Heatsinks
Note:
1. Before you assemble this case, please follow the instruction and remove the protective films of each layer .
2. Our Micro USB Cable doesn't support data transfer.
3. The Kit doesn't include the Raspberry Pi Board.
