Finding your suitable tda7492p bluetooth 4.0 aux is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best tda7492p bluetooth 4.0 aux including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Nobsound Upgraded TDA7492P Chip CSR8635 50W+50W Bluetooth 4.0 Receiver Digital Amplifier Wireless Audio Amplifier Board with Earphones Interface Aux & Power Switch
Feature
This is an upgrade version with AUX port and power switch. TDA7492 digital amplifier with AUX input and power switch; Designed to optimize circuit layout, which can offer excellent sound output and high power.With its DIP switch, it will be more convenient to adjust its post circuit gain, which can drive speakers with higher impedance.With its DIP switch, it will be more convenient to adjust its post circuit gain, which can drive speakers with higher impedance.
Audio Input: 3.5mm AUX input; Adopting CSR8635 Bluetooth chip, which can support Bluetooth stereo audio input.
Output Impedance: 4/6/8/16 ohms speakers supported (8 ohms would be best); Output Power: Adding front-end circuit 5532 to ensure its high output power.
Power Supply: 2.1 interface 8~25V DC power supply; Wrong polarity will burn its chip, please note.
Description
Instruction:
- AUX Input: Connecting it with a 3.5mm audio line;
- Bluetooth Input: After powering the board, please wait 3~10s until its led is flashing between blue and red. Then using your device to find and connect the board.
Package Includes:
1 * Amplifier Board
2. Aideepen TDA7492 2x50 Watt Bluetooth 4.0 CSR8635 2-channel Stereo Audio Receiver Power Amplifier Board with AUX Interface
Feature
It's only 50 watts per channel, which doesn't sound like a lot,but it's sound quality is super powerfulPower amplifier chip: TDA7492 double channels sufficient power 50W, better than TDA7492P
With microphone (can call with Bluetooth), AUX interface(wired mode audio input)
Using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibility
5 buttons for adjustment, convenient and easy operation
Description
Specifications:Amplifier chip: TDA7492
Output power: 2*50W
Supply voltage: DC 10-25V
Power Interface: 2.1 DC Socket
Audio Input: Bluetooth receiver V4.0
Applicable Speaker Impedance: 4/6/8/16 ohm(8 ohm is the best)
Number of channels: two-channel stereo
PCB board size: 81 * 58mm / 3.2 * 2.3in
Weight: 47g
Package Included:
1 * 50W + 50W TDA7492 Bluetooth 4.0 Amplifier Board
3. SMAKN Wireless Digital Bluetooth 4.0 Audio Receiver Amplifier Board TDA7492P 50W+50W---with AUXRadiator version
Feature
100% Brand New and High Quality .Power :2.1 inferince 8-24V DC power supply .
Audio input : Stereo input various verisions of the bluetooth connection,using CSR8635 Bluetooth chip,Bluetooth V4.0,high software compatibility .
Output Impedance :8 ohms Best (4,6,8,16 ohms impedance can diver speaker)
Output Power :Add pre-5532 output foot (powered 25V ,6-ohm impedance output 2*50W ,8 ohm impedance output 2*40W dual-channel)
Description
*100% Brand New and High Quality.*Power :2.1 inferince 8-24V DC power supply .
*Audio input : Stereo input various verisions of the bluetooth connection,using CSR8635 Bluetooth chip,Bluetooth V4.0,high software compatibility .
*Output Impedance :8 ohms Best (4,6,8,16 ohms impedance can diver speaker) *Output Power :Add pre-5532 output foot (powered 25V ,6-ohm impedance output 2*50W ,8 ohm impedance output 2*40W dual-channel).
*TDA 7492 digital amplifier chip ,designed to optimize the circuit layout ,the sound quality is very good ,big power .
*DIP switches can be more easily directly adjusted after-class amplifier gain,to better promote the impedance larger speakers.
*If you use extral audio,you need connect 3.5mm audio line .
*If you directly use Bluetooth,when power ,wait 3s~10s ,until led Blue and Red light flashing alternately,then you can use you device to find my Bluetooth module ,you will find "SANWU Audio ",then connect it ,can directly use it . Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much!
4. TDA7492 2x50W Wireless Bluetooth 4.0 Stereo Amplifier Board Module Dual-Channel With Microphone AUX 10-25V DC Beyond TDA7492P
Feature
TDA7492 2x50W Wireless Bluetooth 4.0 Stereo Amplifier Board Module Dual-Channel With Microphone AUX 10-25V DC Beyond TDA7492PHigh Quality amplifier module
China microphone module Suppliers
Cheap bluetooth amplifier module
Integrated Circuits
Description
Type : Voltage RegulatorModel Number : TDA7492
Operating Temperature : 1
is_customized : Yes
Dissipation Power : 2*50W
Brand Name : diymore
Supply Voltage : 10-25V DC
Application : Computer
Condition : New
Package : OTHER
Type : TDA7492
Country/Region of Manufacture : China
UPC : Does not apply
new
1Set MP3+WMA+WAV Decoder Board Module 2W Amplifier TF Card U Disk Audio AUX With IR Remote Controller Micro USB 5V Free Shipping USD 4.60/piece Free Shipping Speaker Audio Power Amplifier Protection Board Module Component DIY for Arduino AC 12-16V USD 3.50/piece High Quality TDA7492 2x50W Wireless Bluetooth 4.0 Amplifier Board Dual-Channel with MIC AUX USD 10.90/piece Bluetooth 4.0 Audio Receiver Amplifier Board 5W+5W CSR8645 APT-X Hifi Stereo Receiver Module 5V Good Sound Quality USD 8.10/piece 6W + 6W PAM8406 Audio Stereo Amp Amplifier Digital Class D amp2 amp 2 Canal In Stock USD 2.75/piece Acrylic Case cover for TDA7492P Bluetooth 4.0 Audio Receiver Digital Amplifier USD 3.48/piece Top PAM8403 Bluetooth 4.0 Audio Receive Amplifier Board HF11 CSR8635 Bluetooth Digital Amplifier Module 5V Mini USB for Speaker USD 6.89/piece Free Shipping 20W HIFI LM1875T Mono Channel Amplifier Board Stereo Audio Amplifier Module Kit for DIY USD 2.25/piece
Features: Sound quality is very good by using this module. Using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibility. Power amplifier chip: TDA7492 double channels sufficient power 50W, better than TDA7492P. With microphone (can call with Bluetooth), AUX interface(wired mode audio input). With 5 buttons for adjustment, convenient and easy operation. Applicable speaker impedance: 4/6/8/16 ohm (8 ohm is the best). Specifications: Supply Voltage: DC 10-25V Power Interface: 2.1 DC Socket Audio Input: Bluetooth Receiver
5. FidgetFidget Audio Receiver Amplifier TDA7492P AUX 50Wx2 Wireless Bluetooth 4.0 Board BH7
Description
Description:
TDA7492P digital amplifier chip, designed to optimize the circuit layout, the sound quality is very good, with big power.
DIP switches can be more easily direcly adjusted after-class amplifier gain, to better promote the impedance larger speakers.
This item is New and in very good condtion
Small size, Easy to use
Product size: approx.82*50*15mm
Power: 2.1 interface DC 8~25V power supply
6. SMAKN Wireless Digital Bluetooth 4.0 Audio Receiver Amplifier Board TDA7492P 50W+50W---with AUX
Feature
100% Brand New and High Quality .Power :2.1 inferince 8-24V DC power supply .
Audio input : Stereo input various verisions of the bluetooth connection,using CSR8635 Bluetooth chip,Bluetooth V4.0,high software compatibility .
Output Impedance :8 ohms Best (4,6,8,16 ohms impedance can diver speaker)
Output Power :Add pre-5532 output foot (powered 25V ,6-ohm impedance output 2*50W ,8 ohm impedance output 2*40W dual-channel)
Description
*100% Brand New and High Quality.*Power :2.1 inferince 8-24V DC power supply .
*Audio input : Stereo input various verisions of the bluetooth connection,using CSR8635 Bluetooth chip,Bluetooth V4.0,high software compatibility .
*Output Impedance :8 ohms Best (4,6,8,16 ohms impedance can diver speaker) *Output Power :Add pre-5532 output foot (powered 25V ,6-ohm impedance output 2*50W ,8 ohm impedance output 2*40W dual-channel).
*TDA 7492 digital amplifier chip ,designed to optimize the circuit layout ,the sound quality is very good ,big power .
*DIP switches can be more easily directly adjusted after-class amplifier gain,to better promote the impedance larger speakers.
*If you use extral audio,you need connect 3.5mm audio line .
*If you directly use Bluetooth,when power ,wait 3s~10s ,until led Blue and Red light flashing alternately,then you can use you device to find my Bluetooth module ,you will find "SANWU Audio ",then connect it ,can directly use it . Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much!
7. FidgetFidget Amplifier TDA7492P AUX 50Wx2 Wireless Bluetooth 4.0 Audio Receiver Digital PA
Description
00% Brand New and High Quality
New design Acryliccaseor
TDA7492 digital amplifier chip, designed to optimize the circuit layout, the sound quality is very good, big power.
DIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn.
Specification:
Power: 2.1 interface 8 ~ 25V DC power supply
Audio input: stereo input various versions of the Bluetooth connection, using CSR8630 Bluetooth chip, Bluetooth V4.0, high software compatibility
Output Impedance: 8 ohms Best(4,6,8,16 ohm impedance can drive speakers)
Output Power: powered 25V ,6-ohm impedance output 2 X 50W, 8 ohm impedance output 2X40W dual-channel
If you directly use Bluetooth,when power,wait 3s~10s,until led Blue and Red light flashing alternately,then you can use your device to find my Bluetooth module,you will find"SANWU Audio",then connect it,can directly use it.Remember back to even.
8. AUX TDA7492P 50W+50W Wireless Bluetooth 4.0 Audio Digital Amplifie+Case Kit US
Feature
AUX TDA7492P 50W+50W Wireless Bluetooth 4.0 Audio Digital Amplifie+Case KitWith Acrylic Box and Heat Sink can make your module high-grade.
Audio input: CSR8635 Bluetooth chip, Bluetooth V4.0(stereo input various versions of the bluetooth connection). Output Power: Add pre-5532 output foot (powered 25V,6 impedance output 2x50W, 8 impedance output 2x40W dual-channel).
Features Type TDA7492P CSR4.0(C4A3). Working Voltage DC 8-25V (Attention +/-). Size 82mm*50mm.
You'll Receive 1 Pcs AUX TDA7492P Bluetooth4.0 Audio Receiver Board. 1 Set of Acrylic Box Parts and components (Contains four magnetic stud). 1 Pcs 5.5*2.1 Interface Male Connector. 2 Pcs Heat Sink.
Description
AUX TDA7492P 50W+50W Wireless Bluetooth 4.0 Audio Digital Amplifie+Case Kit. *With AUX Input. *With Acrylic Box and Heat Sink can make your module high-grade. *Small size, Easy to use. *Chip:TDA7492P. *Power: 2.1 interface 8-25V DC power supply. *Audio input: CSR8635 Bluetooth chip, Bluetooth V4.0(stereo input various versions of the bluetooth connection). *Output Power: Add pre-5532 output foot (powered 25V,6 impedance output 2x50W, 8 impedance output 2x40W dual-channel). *Output Impedance: 8(Best), 4/6/8/16 impedance can drive speakers. *DIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn. Features Type TDA7492P CSR4.0(C4A3). Working Voltage DC 8-25V (Attention +/-). Size 82mm*50mm. You'll Receive 1 Pcs AUX TDA7492P Bluetooth4.0 Audio Receiver Board. 1 Set of Acrylic Box Parts and components (Contains four magnetic stud). 1 Pcs 5.5*2.1 Interface Male Connector. 2 Pcs Heat Sink.9. Gowoops TDA7492P Stereo Amplifier Board 2x25W Dual Channel Wireless Bluetooth 4.0 Audio Receiver Digital Amplifier Board with 3.5mm Plug
Feature
This TDA7492P Stereo Amplifier Board adopts TDA7492P amplifier chip, the TDA7492P is a dual BTL class-D audio amplifier with single power supply, designed for LCD TVs and monitors, optimize the circuit design to achieve high quality voice.Power Supply: 2.1 interface (5.5-2.1 mm adapter), 9-24V DC power supply, including battery. NOTE that the chip will burned when the positive and negative reverse.
Audio Input: 3.5mm AUX input; CSR8635 Bluetooth chip, Bluetooth V4.0, which can support Bluetooth stereo audio input.
Output Power: Powered 18V,6ohm, impedance output 25W+25W. Powered 20V,8ohm, impedance output 25W+25W. Integrated 5532, a dual high-performance low noise operational amplifier, improved output drive capability and considerably higher small-signal and power bandwidths
DIP switches can be more easily direcly adjusted after-class amplifier gain, to better promote the impedance larger speakers.(21.6dB, 27.6dB, 31.1dB, 33.6dB), 5 buttons to select the play mode: Play, Back, Next, Vol+, Vol-
Description
Description:
The TDA7492P stereo amplifier module is a 25W+25W dual BTL class-D audio amplifier which has built in Bluetooth 4.0 audio receiver.
User can connect to iPhone or Android smart phones and playback the music over the Bluetooth.
This amplifier module is easy to use for various DIY purpose.
Specification:
Chip: TDA7492P
Supply Voltage: DC 9-24V
Power Interface: 2.1 DC Socket and with power switch
Audio Input: Bluetooth Receiver V4.0
Audio Output: Terminal blocks
Applicable Speaker Impedance: 8 the best (4, 6, 8 and 16 impedance are all suitable)
Number of Channels: Two-channel Stereo
Board color: Red
PCB Board Size: 82 x 50 x 17.9mm(LxWxH)
Feature:
HiFi quality and Bluetooth 4.0, super compatibility, easy connection.
DIP switches for different amplifier gain settings.
Build-in dual channel stereo TDA7492P amplifier chip with optimized design and circuit layout.
Attention:
Drop or electric conductor touching circuit may cause IC burned, result in the lost of sound.
How to use:
After connecting to the power supply, wait for 3-10s, until the blue and red led light flashing alternately, then you can use your device to find the bluetooth module, and you will find the bluetooth name, then connect it. Afterward, you can automatically connect it.
Package Including:
1 x TDA7492P Stereo Amplifier Board
10. KKmoon TDA7492 Wireless Bluetooth 4.0 2*50W 2-channel Audio Receiver Stereo Digital Power Amplifier Board Module
Feature
Sound quality is very good by using this module.Using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibility.
Power amplifier chip: TDA7492 double channels sufficient power 50W, better than TDA7492P.
With microphone (can call with Bluetooth), AUX interface(wired mode audio input).
With 5 buttons for adjustment, convenient and easy operation.
Description
It's designed to optimize the circuit layout. Sound quality is very good and it can drive 4/6/8/16 ohm speakers. Bluetooth V4.0, it has sufficient power output 2*50W.Features:
Sound quality is very good by using this module.
Using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibility.
Power amplifier chip: TDA7492 double channels sufficient power 50W, better than TDA7492P.
With microphone (can call with Bluetooth), AUX interface(wired mode audio input).
With 5 buttons for adjustment, convenient and easy operation.
Applicable speaker impedance: 4/6/8/16 ohm (8 ohm is the best).
Specifications:
Supply Voltage: DC 10-25V
Power Interface: 2.1 DC Socket
Audio Input: Bluetooth Receiver V4.0
Amplifier Chip: TDA7492
Output Power: 2*50W
Applicable Speaker Impedance: 4/6/8/16 ohm
Number of Channels: Two-channel Stereo
PCB Board Size: 81 * 58mm / 3.2 * 2.3in
Weight: 47g
Package List:
1 * Bluetooth 4.0 Audio Receiver Power Amplifier Board