Finding your suitable presence sensor zwave is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best presence sensor zwave including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Aeotec Water Sensor, Z-Wave Flood & Leak Sensor
Feature
Monitor and protect against leaks and floods in real-time. Can also detect the absence of water when used with tanksSuper accurate; can detect as little as 0.03% of an inch of water
AAA battery-powered and wireless with 1 year battery life
Compatible with certified Z-Wave gateways including Samsung SmartThings, mirrors vera, open Z-Wave, in control, and homeseer
Z-wave certified. Certification Number: zc08-14030008
Description
We all protect our homes against fires and thefts, but, each year, more homes are damaged by small water leaks than larger disasters. Aeotecs Z-Wave Water Sensor helps you monitor for water leaks and floods and prevent them. Super accurate, its capable of measuring as little as 0.03% of an inch of water. Powered by 2 x AAA batteries and with a typical battery life of over 1 year, Water Sensor is compatible with certified Z-Wave gateways including Fibaro, HomeSeer, openHab, Samsung SmartThings, Vera, and Wink.2. Enerlites MWOS-W Motion Sensor Switch, Ultrasonic and PIR Dual Technology, Occupancy Sensor, Motion Sensor Light Switch, NEUTRAL WIRE REQUIRED, Wall Plate Included, White
Feature
Dual technology motion light switch combines passive infrared (PIR) and ultrasonic sensors in one sensor switch for enhanced accuracy and to detect fine motion, such as typing, reading, etcCombination of PIR and ultrasonic sensors eliminates false positives by preventing lights from shutting off when the room is still occupied
Ideal for private or executive offices, meeting rooms, restrooms, libraries, classrooms, and other spaces where limited movement is likely to occur to ensure the light does not shut off by itself
Customizable settings, such as adjustable time delay, detection range, light level. Change between occupancy/vacancy modes and set different PIR/ultrasonic trigger modes and levels
Neutral wire required for installation. Single-pole use only. 120/277VAC. Incandescent: 800W. Major movement coverage: 1200sq ft., Minor movement coverage: 400sq ft. UL listed. Decorator wall plate included
Description
Dual technology motion sensor Multi-Technology occupancy motion sensor switch captures very fine motion such as typing or reading to turn ON OFF the load automatically. This switch allows users to customize the triggering mode and sensitivity level according to their need for fine motion. The dual tech motion sensor integration of passive infrared PIR sensor switch and ultrasonic sensor switch technology into one motion sensor switch improves the sensor's triggering accuracy and sensitivity with significantly less false triggers. When the sensor switch load is set to be triggered on when both PIR and ultrasonic sensors detect the presence of occupants, users enjoy the most precise lighting control with the least false-on and false-off. In addition to options between Auto ON Auto OFF and Manual ON Auto OFF, MWOS always ranks the best choice for its user friendly / easy installation options including 4 trigger modes, 8 timeout, walk-through mode, sensitivity with PIR and sensitivity with ultrasound sensor and 4 adjustable daily light range. Set the triggering condition among when either PIR sensor or Ultrasonic Sensor detects motion, only PIR sensor detects motion, only Ultrasound sensor detects motion, or both PIR and Ultrasonic sensor detect motion. This occupancy sensor wall switch features 8 AUTO OFF timeout settings: 5-sec test, 30 seconds, 5, 10, 15, 20, 25 and 30 minutes. The light control switch allows users to enable or disable Walk-Through Timeout Mode: A "walk-through" mode can automatically turn lights off after only 3 minutes if no activity is detected after 30 seconds following an occupancy detection. Users have 4 options to choose the day light saving level. With light level sensor in MWOS sensor switch, the load will be kept OFF even when motion is detected if the natural light is sufficient according to your light level setting. MWOS, under OCC occupancy sensor mode will turn on light when motion is detected.3. Z-wave Plus Gold Plated Reliability Garage Door Tilt Sensor, White (TILT-ZWAVE2.5-ECO)
Feature
INDUSTRY LEADING: Features Gold Plated tilt components to ensure industry leading reliability.EASY INSTALLATION: This tilt sensor includes a flush mount bracket for a simple setup. After mounting, simply insert the battery to begin the learning process.
5 YEARS BATTERY LIFE: Five year battery life on one CR123A lithium battery. Its discrete design will keep it out of sight and out of mind when not on alert.
Z-WAVE: Works with most brands of Z-wave home security hubs. This tilt sensor has an external contact input available for external triggers.
ECOLINK: Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices.
Description
This Ecolink Garage Door Tilt Sensor is a Z-Wave Plus enabled device designed to smoothly integrate into a Z-Wave Plus home automation network. It will detect the opening of a garage door and will alert your system of any intrusion immediately. It can also be connected to an external trigger. Gold Plated tilt components are specifically designed to ensure industry leading reliability. The sensor detects tampering and alerts you immediately when the cover is removed.4. GoControl Z-Wave Siren and Strobe, WA105DBZ-1
Feature
Wireless Z-wave Sounder/strobe105db Sounder At 1m
360-lumen Led Strobe
100ft Line-of-sight Range
Tamper-resistant Design
360 Lumen, 4 LED Strobe light, 105DB at 1 m
Compatible with any certified Z-Wave based system such as Nexia Home Intelligence
Configurable for Siren only, Strobe only, or Siren and Strobe
Description
The Linear WA105DBZ-1 is a Z-Wave enabled combination Sounder/Strobe warning device, designed to alert intruders of a security system presence. Once paired with a compatible Z-Wave controller or hub, the sensor can be turned on or off remotely via the Z-Wave controller and network. When on, the sounder emits a very loud 105dB alert tone and the integrated strobe flashes brightly. The WA105DBZ-1 Sounder/Strobe is designed to be wall mounted, comes with a UL-approved AC plug-in power supply and offers an integrated battery backup in case of AC power interruption.5. Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
Feature
6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor.2 year battery life
Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight.
Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera.
Z-Wave Plus certified. Certification number: ZC10-15070011
Description
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6s accuracy varies as little as 0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. Its built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features. SPECIFICATIONS: Motion Sensor : 16 feet, and 120 field of view; Humidity Sensor : 20% to 95%, accuracy:+/- 5% at 77F; Temperature Sensor : 14F (-10C) ~ 140F (60C), accuracy: +/- 32.9F (0.5C); Light Sensor : 0 lux to 1000 lux; Vibration Sensor : acts as tamper switch, ON or OFF; Operation Temperature (Top): -4F (-20C) ~ 140F (40C); Storing Temperature: -40F (-40C) ~ 176F (80C); Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA or 2 x CR123A battery; Weight: 2.6 oz6. Everspring Compact Z-Wave Motion Sensor (HSP02)
Feature
Z-Wave Frequency: 908.42 MHz (US)Includes PIR (motion) and Light level sensors
Supports two Z-Wave groups and up to six devices
Tamper and low-battery alarm notification
PIR range: 10m x 110 (at height of 1.8m)
Description
The Everspring HSP02 is a versatile Z-Wave compatible motion detector. It can be triggered by movement or changes in light level, allowing it to be used as a security and home automation sensor. The detector includes two sensors. PIR (passive infrared receiver) Monitors changes in infrared level and movement that indicate a persons presence. Once detected, the unit sends an alert to all the Z-Wave devices it is associated with. Light Level sensor Measures a room's ambient light level (lux) allowing it to trigger an event when the light level is above or below a pre-set level. For instance, when the room is dark and movement is detected the unit signals to the controller to turn the room's lights on - lights come on automatically when you walk into a room. The motion detector is battery-operated, an alert will be sent to the central controller and the units LED will flash when the battery level becomes too low. It also includes a tamper alarm that sends an alarm signal if anyone tries to prevent it working.7. Monoprice Z-Wave Plus PIR Multi Sensor, Temperature - Humidity - Light
Feature
Motion Detection: This device uses a passive infrared sensor and sends a Z-Wave Plus signal when motion is detected within its detection range. It can detect moving objects within line of sight at distances up to 32 feet, away with a field of view up to 120.Temperature Detection: The sensor will automatically report the measured temperature whenever it changes by a particular amount. By default, it reports every time the temperature changes by 1C.
Humidity Detection: The sensor will automatically report the measured humidity level whenever it changes by a particular amount. By default, it reports every time the humidity level changes by 10%.
Light Detection: The sensor will automatically report the measured light level whenever it changes by a particular amount. By default, it reports every time the light level changes by 10%.
Z-Wave Plus is a low power mesh networking communications technology that allows Z-Wave Plus enabled devices to communicate with each other and to distribute Z-Wave Plus messages throughout the network.
Description
This passive infrared (PIR) sensor detects motion and sends a Z-Wave trigger signal to the network. It also features temperature, humidity, and light sensors, which will automatically report changes in the conditions and will report the absolute values when queried. It has a tamper-proof switch, which will trigger a Z-Wave signal when the cover is removed. These trigger signals can be used to activate various other devices and perform preprogrammed tasks. This is a security enabled Z-Wave Plus product and a security enabled Z-Wave gateway/controller must be used to fully utilize this sensor.8. Zipato Z-Wave Multi Sensor Quad, ZI-ph-psm02.us, White
Feature
Supports Z-wave protocolSleek Design, Easy DIY Installation
Reliable detection and metering functions
