Finding your suitable cpld xilinx is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best cpld xilinx including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Compatible XILINX Platform Cable USB FPGA CPLD JTAG Slave-Serial SPI DLC9G in-circuit Download Debugger Programmer @XYGStudy
Feature
Platform Cable USB (Connects to PC: Via USB interface)XILINX FPGA/CPLD/PROM configuration and programming Cable
Supported Software : Xilinx ISE, iMPACT, ChipScope, Vivado
Supported Interfaces : JTAG, Slave-Serial and SPI
Description
DescriptionThe Platform Cable USB is a USB compatible cable for in-circuit configuration and programming of all Xilinx devices. It is compatible with the original XILINX Platform Cable USB.
Key Features
Performance
* Using CY7C68013A+FPGA solution, fully compatible with the original XILINX Platform Cable USB
* Programs all Xilinx devices, including FPGAs / CPLDs / ISP Configuration PROMs
* Supports JTAG, Slave-Serial and SPI programming, to config all Xilinx devices
* Interfaces to devices operating at 5V / 3.3V / 2.5V / 1.8V / 1.5V
* Optional target clock frequency, supports XILINX software automatic frequency adjustment
* Firmware auto upgrade, it's possible to support more new released software and devices
* Anti-static and multi-layers signal isolation, to protect the target and the programmer itself
Supported Software
* Xilinx ISE
* iMPACT
* ChipScope
* Vivado
Supported Devices
* Xilinx FPGA devices: UltraScale / 7 series / Zynq / Kintex / Virtex / Artix / Spartan, etc.
* Xilinx CPLD devices: XC9500 / XC9500XL / XC9500XV / CoolRunner XPLA3 / CoolRunner-II, etc.
* Xilinx PROM devices: Platform Flash XCF00S / XCF00P / XL, etc.
LED Status
* Red: USB connected
* Yellow: USB connected, and Vref (the target board) is powered
Package Contains
Platform Cable USB 1
JTAG adapter 1
USB cable 1
8-pin to 7-pin separated cable 1
14-pin (2.54mm pitch) JTAG cable 1
14-pin (2mm pitch) JTAG cable 1
10-pin (2.54mm pitch) JTAG cable 1
For more details you may need to know, pls firstly send me message via Amazon,I will then send attached link including User Guide for you, thank you for patience :)
Copy below to buy a suitable one for you:
Open3S500E Package B: http://www.amazon.com/gp/product/B00DW8GJ1Q
Programmer(Platform Cable USB): http://www.amazon.com/gp/product/B00CAU6TSU
2. Digital Electronics Laboratory Experiments Using the Xilinx XC95108 CPLD with Xilinx Foundation: Design and Simulation Software (2nd Edition)
Description
This manual offers an easy-to-read, easy-to-follow approach to digital fundamentals through the use of Complex Programmable Logic Devices (CPLDs). The use of advanced logic device technology prepares readers for using an industry-standard design environment. The first shorter section of the book contains a set of lab jobs using a single TTL chip: the 74LS00 quad 2-input NAND gate, allowing students to build a few simple circuits immediately. The second section contains a set of hands-on lab jobs with step-by-step instructions on using the Xilinx XC95108 CPLD. With its comprehensive appendices, this manual can prove useful to those who work with large-scale programmable devices such as CPLDs and FPGAs in the fields of electronics and engineering.
3. Compatible XILINX Platform Cable USB FPGA CPLD JTAG SPI Download Debugger Programmer DLC9G
Feature
XILINX PLATFORM CABLE USB: compatible cable for in-circuit configuration and programming of all Xilinx Devices.XILINX FPGA PROGRAMMING CABLE
SUPPORTED SOFTWARE: Xilinx ISE 8 to ISE 14.7 and up-to-date ISE software; Xilinx Vivado; IMPACT; ChipScope; Microblaze embedded processor debugging.
SUPPORTED INTERFACE: JTAG, Slave-Serial and SPI
Platform Cable USB attaches to the USB port on a desktop or laptop PC with an off-the-shelf Hi-Speed USB A-B cable.
Description
The Platform Cable USB ,a USB compatible cable for in-circuit configuration and programming of all Xilinx devices.It derives all operating power from the hub port controller. No external power supply is required. A sustained slave-serial FPGA configuration transfer rate of 24 Mb/s is possible in a Hi-Speed USB environment.Performance
o Using CY7C68013A+XC2C256 solution, fully compatible with the original XILINX Platform Cable USB;
o Supports all Xilinx devices, FPGA configuration and PROM/CPLD programming;
o Supports JTAG, Slave-Serial and SPI;
o Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V;
o Selectable target clock frequency, supports software automatic frequency adjustment;
o Supported on Windows and Red Hat Enterprise Linux;
o Automatically senses and adapts to target I/O voltage;
o LED Status Indicator;
o Target clock speeds are selectable from 750 kHz to 24 MHz.
Supported Software
o Xilinx ISE 8 to ISE 14.7 and up-to-date ISE software;
o Xilinx Vivado;
o IMPACT;
o ChipScope;
o Microblaze embedded processor debugging.
Supported Devices
o All Xilinx devices, FPGA and PROM/CPLD:
o All Virtex-FPGA families;
o All Spartan-FPGA families;
o XC9500 / XC9500XL / XC9500XV CPLDs;
o CoolRunnerXPLA3 / CoolRunner-II CPLDs;
o XC18V00 ISP PROMs;
o Platform Flash XCF00S/XCF00P/XL PROMs;
o XC4000 series FPGAs ;
o Fresh Xilinx devices including V7, Z7 etc.
Package Contains
1. Platform Cable USB 1
2. JTAG adapter 1
3. USB 2.0 cable, 1.5 meter length 1
4. 8-pin to 7-pin separated robin cable 1
5. 14-pin (2.5mm pitch) JTAG flat cable 1
6. 14-pin (2mm pitch) JTAG flat cable 1
7. 10-pin (2.5mm pitch) JTAG flat cable 1
4. 1pc XC95108-10PQ160C XILINX IC CPLD 108MC 10NS 160QFP D/C 0029 NEW!
Feature
2 Year WarrantyDescription
COMPONENT5. NGW-1set Compatible XILINX Platform Cable USB FPGA CPLD JTAG SPI Download Debugger Programmer
Feature
NGW-1set Compatible XILINX Platform Cable USB FPGA CPLD JTAG SPI Download Debugger ProgrammerDescription
NGW-1set Compatible XILINX Platform Cable USB FPGA CPLD JTAG SPI Download Debugger Programmer6. Xilinx FPGA / CPLD Design Manual (1CD) (Chinese Edition)
Description
Xilinx FPGA / CPLD Design Manual start from the perspective of a beginner, systematic introduce the design flow of Xilinx FPGA/CPLD from an original perspective and reasonable arrangement, also introduce the basic use and the skills of integrated design tool ISE 10.x, provide some of the classic design example for readers to study and reference.7. Xilinx XC9572XL AMS CPLD development learning board test board+4 programm LED
Feature
1.chip on board :XC9572XL , 2.on board JTAG interface(10pin) , 3.active crystal on board :50MHZ4.with 4 programmable LED , 5.with a 5V to 3.3V chip: AMS1117-3.3 , 6.DC-5 V power supply with switch
7.All the I/O port lead out for further application , 8.board size: 61 (mm) x48 (mm)
Package included?1PCS x Xilinx XC9572XL CPLD AMS Development Learning Test Board+4 Programm LED
It's brand new, good quality & high performance. ** PLS PAY ATTENTION the accurate size & voltage rate before placing order in order to avoid buying wrong thing. Free Shipping & the deliver time to USA is approx. 10-18 days after the shipment date.
Description
Package included?1PCS x Xilinx XC9572XL CPLD AMS Development Learning Test Board+4 Programm LED8. Arduino Compatible SCM & DIY Kits Module Board - Xilinx XC9572XL CPLD Development Board Learning Board Experimental Plate - 1 x Xilinx XC9572XL CPLD Development Board
Feature
Onboard JTAG portOnboard 50MHZ active crystal
With 4 programmable LED
With the 5V to 3.3V chip AMS1117-3.3
5V power supply switch
Description
Description: XC9572XL chip on boardOnboard JTAG port
Onboard 50MHZ active crystal
With 4 programmable LED
With the 5V to 3.3V chip AMS1117-3.3
5V power supply switch
All IO all leads
The board size: 61 (mm) x48 (mm)
Infos:https://pan.baidu.com/s/1dENUTpf
Package included:
1 xXilinx XC9572XL CPLD Development Board
9. Professional XC2C64A Xilinx Platform USB Download Cable for FPGA CPLD C-Mod with cable
Feature
Support all Xilinx devices:All Virtex FPGA families;All Spartan FPGA families;XC9500/XC9500XL/XC9500XV CPLDs;CoolRunner XPLA3/CoolRunner-II CPLDs;XC18V00 IPS Proms;XCF00S/XCF00P Platform Flash PROMS;XC4000 series FPGAsSupported on Windows and Red Hat Enterprise Linux
Work with impact,chipscope pro and microblaze embedded processer debugging
Support target system using 5.0V TTL,3.3V LVTTL/LVCMOS,2.5V,1.8V,1.5V
Apply to Xilinx CPLD/FPGA chips download debugging
Description
Description:1. Support all Xilinx devices:All Virtex FPGA families;All Spartan FPGA families;XC9500/XC9500XL/XC9500XV CPLDs;CoolRunner XPLA3/CoolRunner-II CPLDs;XC18V00 IPS Proms;XCF00S/XCF00P Platform Flash PROMS;XC4000 series FPGAs
2. Supported on Windows and Red Hat Enterprise Linux
3. Work with impact,chipscope pro and microblaze embedded processer debugging
4. Support target system using 5.0V TTL,3.3V LVTTL/LVCMOS,2.5V,1.8V,1.5V
5. Apply to Xilinx CPLD/FPGA chips download debugging
6. Support JTAG,Slave Serial,SPI download mode,can configure all Xilinx devices
7. Xilinx Platform with USB Cable fully compatible
8. Target device to download the clock options,up to 24MHz
9. Support Impact and ChipScope
10. Firmware can be updated automatically
Include:
1 x Xilinx Platform Cable USB
1 x 10-pin 2.54mm pitch 15cm flat cable,
1 x 14-pin 2.0mm pitch 15cm flat cable,
1 x 14-pin 2.54mm pitch 15cm flat cable
1 x 7-pin fly duppont cables
1 x Adapter plate
1 x 6-pin cable
1 x USB Cable
