Finding your suitable toggler snaptoggle 5/16 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best toggler snaptoggle 5/16 including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. CRL Snaptoggle 5/16-18 Toggle Bolt - Pack of 10
Feature
Heavy-Duty Wall AnchorsGreat for Hand Rails, Grab Bars, Display Standoffs, and Glass Shelving
Designed for Use with Gypsum Board, Concrete, Cement Board, Plaster, Stucco, Plywood, Steel Studs, and Composite Panels
Installs in Minutes
Description
C.R. LAURENCE TB51618 CRL Snaptoggle 5/16" - 18 Toggle Anchor (10 Pack). CRL SNAPTOGGLEr Toggle Anchors pre-install without a bolt and can be installed using a screw gun because the anchor won"t spin in the hole. They also allow for bolt or fixture removal without the anchor falling behind the wall. SNAPTOGGLEr can be used in drywall, plaster, cement board, hollow walls of block, brick, stucco, fiberglass, and wood. NOTE: Bolts sold separately.. Part Numbers Variations: TB516182. TOGGLER ALLIGATOR A8 Screw Anchor, Plastic, 5/16" Diameter, 1-9/16" Length, #8 to #14 Threads, Pack Of 100
Feature
Anchor installs into hollow and solid materials such as concrete, brick, stone, and drywall to securely hold a loadCorrosion-resistant polypropylene body expands and elongates within a solid substrate to distribute force evenly and opens its jaws to lock position within a hollow substrate when a screw is inserted
Made in USA, and works with #8 to #14 screw sizes (sold separately)
Ultimate tensile strength is 85 lb. in 1/2" drywall and 1,025 lb. in 3,500 psi concrete with a #12 sheet metal screw
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER ALLIGATOR A8 flush-mount anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, and is made in USA. Once inserted flush with the surface of a 5/16" drilled hole in a wall, ceiling, or floor, the anchor accepts a #8 to #14 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/4". The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole when a screw is inserted. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material.
Specifications
Ultimate Tensile Strength Values
Anchor | Drill Diameter | Screw Description | 1/2" Drywall | 3,500 psi Concrete |
A5/AF5 | 3/16" | #8 sheet metal screw | 57 lb. | 544 lb. |
A6/AF6 | 1/4" | #10 sheet metal screw | 69 lb. | 675 lb. |
A8/AF8 | 5/16" | #12 sheet metal screw | 85 lb. | 1,025 lb. |
A10 | 3/8" | #14 sheet metal screw | N/A | 1,168 lb. |
Ultimate Shear Strength Values
Anchor | Drill Diameter | Screw Description | 1/2" Drywall |
A5/AF5 | 3/16" | #8 sheet metal screw | 125 lb. |
A6/AF6 | 1/4" | #10 sheet metal screw | 153 lb. |
A8/AF8 | 5/16" | #12 sheet metal screw | 171 lb. |
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
3. TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 3/16"-24 UNC-threaded bolts
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength Values | Ultimate Shear Strength Values |
1/2" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 238 lb. | 247 lb. |
5/8" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 356 lb. | 298 lb. |
1/2" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 412 lb. | Not Available |
5/8" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 462 lb. | Not Available |
Concrete Block | 1/2" | 3/16"-24 UNC zinc-plated steel | 802 lb. | Not Available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (10) TOGGLER SNAPTOGGLE BA toggle anchors
- (10) 3/16"-24 UNC bolts
4. TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 100)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
1/2" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 265 lb. | 241 lb. |
5/8" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 356 lb. | 324 lb. |
1/2" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 425 lb. | Not available |
5/8" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 464 lb. | Not available |
Concrete Block | 1/2" | 1/4"-20 UNC zinc-plated steel | 1,080 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
5. TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 5/16"-18 UNC Fastener Size (Pack of 25)
Feature
Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 5/16"-18 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 270 lb. in 1/2" drywall and 1,400 lb. in concrete block with a 5/16"-18 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BE toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 5/16"-18 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
1/2" Drywall | 3/4" | 5/16"-18 UNC zinc-plated steel | 270 lb. | Not available |
5/8" Drywall | 3/4" | 5/16"-18 UNC zinc-plated steel | 480 lb. | Not available |
1/2" Drywall with 25 Gauge Stud* | 3/4" | 5/16"-18 UNC zinc-plated steel | 439 lb. | Not available |
5/8" Drywall with 25 Gauge Stud* | 3/4" | 5/16"-18 UNC zinc-plated steel | 477 lb. | Not available |
Concrete Block | 3/4" | 5/16"-18 UNC zinc-plated steel | 1,400 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
6. 12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 1/4"-20 UNC-threaded bolts
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt (included)
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
Mount anything!The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
7. Toggler Snaptoggle Toggle Bolt and Drywall Molly (Pack of 4)
Feature
Simple to use and easy to install molly anchor kit.Twice as strong as a regular toggle bolt - solid metal channel
Straps act as installation tool, help install metal channel behind the wall
Kit includes 4pc SNAPTOGGLE 1/4-20 toggle bolts (no bolts)
Description
4pcs kit SNAPTOGGLE 1/4-20 toggle bolt, Grip Range 3/8 to 3 5/8 inch. Includes 2.5 inch screws and washers.This super strong fast toggle bolt allows you to mount tilting or low profile tv mounts to drywall or steel studs. The SNAPTOGGLE fastener is preferred by installers for its superior strength and quick easy installation. The SNAPTOGGLE anchor has been tested by Cornell University and has been found to exceed national building codes. This kit of 4 snap togglers includes 2.5 inch long grade 5 bolts.
Recommendations:
1) 4 Togglers are recommended for low profile or tilting tv mounts with TV weights from 0 to 75 pounds.
2) 8 Togglers are recommended for low profile or tilting tv mounts with TV weights from 75 to 100 pounds.
3) Do not mount TV's heavier than 125 pounds in drywall or on steel studs.
4) The togglers are recommended only for Flat TV mounts or tilting TV mounts.
Specifications:
* Super strong anchor / toggle
* Stronger than standard molly
* Grade 5 bolts
* 8 can hold up to a 125 pound TV
* Smaller hole required than wing molly
* Exceeds National Building code requirements
* Fast easy hands free installation
* Can be used in metal studs with proper holes
8. (BE) 5/16-18 Toggler SNAPTOGGLE Heavy Duty Toggle Bolt Zinc Plated (25)
Feature
N/A9. CRL Snaptoggle 5/16-18 Toggle Bolt - Pack of 10 by C.R. Laurence
Feature
CRL Snaptoggle 5/16-18 Toggle Bolt - Pack of 10Description
Heavy-Duty Wall Anchors;Great for Hand Rails, Grab Bars, Display Standoffs, and Glass Shelving;Designed for Use with Gypsum Board, Concrete, Cement Board, Plaster, Stucco, Plywood, Steel Studs, and Composite Panels;Installs in Minutes10. CRL Snaptoggle 5/16-18 Toggle Bolt - Pack of 10 by C.R. Laurence
Feature
CRL Snaptoggle 5/16-18 Toggle Bolt - Pack of 10Description
Heavy-Duty Wall Anchors;Great for Hand Rails, Grab Bars, Display Standoffs, and Glass Shelving;Designed for Use with Gypsum Board, Concrete, Cement Board, Plaster, Stucco, Plywood, Steel Studs, and Composite Panels;Installs in Minutes11. (AF8) 5/16 ALLIGATOR Anchor w/ Flange Nylon (100)
Feature
N/A12. Toggler AF8 5/16 Dia Alligator Anchors W/ Flange & #12 x 1-3/4 Combo Head Screws - 20 Pieces Each
Feature
20-pcs AF8 alligator anchors 5/16 diameter with flange20-pcs #12 x 1-3/4 combo head screws
Description
Toggler ALLIGATOR All Purpose Wall Anchors work in all types of materials to include drywall, concrete, brick, tile, plaster, stucco and wood. They are actually stronger than most metal and chemical anchors because the all plastic plug bonds through friction to concrete, brick and masonry.13. Mechanical Plastics Co 45240 Tc Hollow Wall Anchors 5/8"-3/4" 20 Pack
Feature
20 pack5/8" - 3/4" grip range
5/16" drill diameter
Screw size #6 - 14
Included screw #8 x 1-3/4"