Finding your suitable 4kw spindle is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best 4kw spindle including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. VFD 220V 4.0KW 5hp Variable Frequency Drive CNC Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(4.0KW, 220V)
Feature
IMPORTANT NOTE: this VFD is ONLY applicable to three phase asynchronous motor and NOT support external resistor.Fan runs all the time even though the motor isn't.the unit output is 400hz when you receive it ,you need to change the parameter to match your motor (if your motor is other hz)This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.The input is 220v 1 or 3phase.you can just connected L1/L2 to any two of VFD input R/S/T
This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This unit use Sine wave PWN(SPWM) for the control system.Work well with the Mach 3 controller
Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
All VFD drive are subjected to an extensive quality assurance and testing program prior to shipment.If there are problems in use after you receive,please don't give us negative or natural feedback.Due to VFD is a flexibly configurable device, please be sure to contact us and we will give you a satisfactory solution.
Description
critical video link https://youtu.be/XVvDsdHq1OQIMPORTANT NOTEthe unit is ONLY applicable to THREE PHASE ASYNCHRONOUS motor,please confirm your motor is three-phase asynchronous motor before purchase.To protect VFD, when you stop using it,please be sure to press the red button "stop" and power off
specification
Suitable motor: <3.7KW5hp
power:4.0KW
horsepower:5.4HP
Input voltagesingle phase or three phase 220V
Output voltage220V, three phase
Output frequency:0-50Hz / 0-400Hz
Input Frequency: 47-63Hz
Output Current:16A
Feature
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability
Easy PLC function can realize 16 legs of speed and inverter control function
RS485 communication port, adopting standard international MODBUS main circuit control
CWith extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability
Carrier adjustable by 16KHZ, completely soundless working environment
Broad voltage working area, normal running in 304V-456V
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
With perfect error protection and short circuit starting protection capability
parameter setting video for HY vfd https://youtu.be/2VXMxxa6lXM
2. CNC 4KW 4000w 220V 5HP Variable Frequency Drive Inverter VFD for Spindle Motor Speed Control
Feature
This VFD can be used for constant torque loads ( such as hard starting: Air compressors, HVAC units)Power:4KW.ISO9001 quality certifications which means this item is the top quanlity item
Universal AC Vector VFD Variable Frequency Drive
Auto Voltage Regulation(AVR),Decelerating Stop or Coasting Stop,DC Braking,Auto Reset and Restart
Carrier adjustable by 16KHZ, completely soundless working environment
Description
IntroductionThis VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter. The input for this VFD is 1 or 3 phases as you like. You can control the different speed .It can be used as a motor speed control and a phase converter.Many customer bought our VFD from us to use for:Lathes, Mills, Car Hoists, Pumps and Conveyors.
Technical Parameters
Power:4KW
Input Voltage:220(We also stock 38015%, please contact us for item stock)
Input Frequency:48 to 63 Hz
Output Voltage:208 to 240VAC (analogous to Input Voltage)
Output Frequency:0 to 400 Hz
Input Phase:1 or 3 phase as you like
Output Phase:3 phase
Features
1.Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.
2.RS485 communication port,adopting standard international MODBUS main circuit control
3.Broad voltage working area
4.PID control: advanced calculous PID closed-loop arithmetic, quick responding speed and high suitabil
5.Broad voltage working area
6.Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
7.Carrier adjustable by 16KHZ, completely soundless working environment
8.RS485 communication port,adopting standard international MODBUS main circuit control
9.Auto voltage regulation (AVR) technique,ensuring the inverter load capability
10.With perfect error protection and short circuit starting protection capability
3. 3KW 220v Water Cooled CNC Spindle Motor and 3kw 220v Vfd Variable Frequency Drive
Feature
3kw Water-cooled Motor Spindle and Matching InverterFour bearing(2*C7003+2*C7005) in our spindle motor
3kw Water-cooling High Speed High Precision Spindle
Motor Numerical Engraving/grinding/milling
Water-cooled Er20 Collet Chuck
Description
Technical Parameter of 3KW Water-cooled Spindle motor1.Spec: 100*240mm(Middle body Diameter 100*240mm)
2.Power:3KW
3.Voltage:220V
4.Frequency:0-400HZ
5.Speed: 0-24000 R/min
6.ER20 collet chuck water-cooled
7.Runout off:Less than 0.005mm
8.Grease Lubrication
Technical Paramer for 3kw Variable Frequency Drive inverter
1.Input voltage:220V+/15%(we also stock1.5KW,3KW,4KW,5.5KW,7.5KW inverter,pls contact with us if you need)
2.Output voltage:208-240V(Analogous to Input voltage)
3.Input Frequency:48-63HZ
4.Output Frequency:0-400HZ
5.Input Phase:Suit for 1 phase input and 3 Phase input
6.Output:3 Phase
7.Warranty:two years
4. Mophorn Spindle Motor 4KW Square Air Cooled Spindle Motor ER20 Collect 18000RPM 220V CNC Spindle Motor for CNC Router Engraving Milling Machine (4KW ER20 Air Cooled)
Feature
Cooling: Air cooling;Power: 4 KW;Collet:ER20Voltage: 220 V/60HZ;Cooled Spindle Motor SPEED: 1-18000 R/min
4PC Ceramic bearing,Runout off less than 0.01mm,tapered bore: less than 0.005mm
The 4KW Square spindle motor is applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc
Air Spindle MotorIn extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time
Description
4kw/4000W Quanlity Air Cooled Spindle Runout-Off 0.01mm ER20 220V Spindle motor
Introduction
The 4 kw spindle motor is made of high-qualified material, so the products have the following advantages: stable performance, easy operation, high quality, less noise and so on. It is much more easy for users to care and maintennace the product. The Spindle Motor features 4KW, 18000rpm, with ER20 (6 mm) collet. Suitable for milling and engraving machines
Tech Date
Cooling: Air cooling
Collet: ER25 (6 mm)
Power: 4 KW
Voltage: 220 V
Current: 10 A
Frequency: 300 Hz
Speed: 1-18000 rpm
Runout off: 0.01 mm
Bearings:7003 x 2, 7005 x 2
Bearing Lubrication: Grease
Main application: Wood, Aluminum, Stone, metal, glass, PVC industry
Usage: Engraving machines
Package Content
1 x 4KW Air Cooled Spindle Motor
1 x Collet ER20 (6MM)
1 x Aviation Plug
5. 220V 4KW Air Cooled ER20 CNC Spindle Motor and Matching 4kw Variable Frequency Drive Inverter
Feature
4KW Air-COOLED MOTOR SPINDLE AND MATCHING INVERTERFour pcs bearings(2*C7003+2*C7005) in our spindle motor
4KW Air-COOLING HIGH SPEED HIGH PRECISION SPINDLE MOTOR NUMERICAL ENGRAVING/GRINDING/MILLING
Air-COOLED ER20 COLLET CHUCK
Adopt Germany Imported Bearing
Description
Technical Parameter of 4KW Air-cooled Spindle motor1) Spec: 220mm*100*85 mm (Diameter:220mm lenth*100mm width x 85mm height)
2) Power:4KW
3) Voltage: 220V
4) Frequency: 300 Hz
5) Speed: 0-18000 R/min
6) AIR- Cooling
7) ER20 collet chuck
8) Runout off:less than 0.005mm
9) Grease Lubrication
Technical Paramer of 4KW matching inverter
Input Voltage: 220V(We also stock 380V, please contact us for item stock)
2.Output Voltage - 208-240VAC (analogous to Input Voltage)
3.Input Frequency: 48-63 Hz
4.Output Frequency: 0-400 Hz
5.Input Phase: 1 or 3 phase
6.Output Phase: 3 phase
7.Warranty: 1 year
6. VEVOR VFD 4KW 220V 5HP 7A Variable Frequency Drive Inverter AVR Technique VFD Drive for Spindle Motor Speed Control (4KW)
Feature
VFD Power:4KW / Voltage:220V-250V. Carrier adjustable by 16KHZ, completely soundless working environment.VFD Input Phase: 1 or 3 phase as you like;Output Phase: 3 phase.
This Variable Frequency Drive Inverter adopts the Japan Mitsubishi chip,PID control;Advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability.
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability.
This VFD can be used for constant torque loads and variable torque loads,such as Air compressors, HVAC units, pumps, fans, etc.
Description
Introduction
This VFD can be used as a motor speed control and a phase converter. The input for this VFD is 1 phase . You can control the different speed as you like when yo use this VFD. Advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability. This item use Sine wave PWN(SPWM ) for the control system and performance excellently. Many customer bought this VFD from us to use for: Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
Features:
Easy PLC function can realize 16 legs of speed and inverter control function
RS485 communication port, adopting standard international MODBUS main circuit control
With extremely strong anti-jamming capability
Low output ratting torque 0.5HZ-150%, low speed running ability
Broad voltage working area
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
With perfect error protection and short circuit starting protection capability
ISO9001 quality certifications which means this item is the top quality item
2 year Warranty
Parameters:
Input Voltage: 220V(We also stock 380V, please contact us for item stock)
Output Voltage: 208-240VAC ( analogous to Input Voltage )
Input Frequency: 48-63 Hz
Output Frequency: 0-400 Hz
Input Phase: 1 or 3 phase as you like
Output Phase: 3 phase
Item Manufacture: From a well-known manufacture who manufacture VFD for more than 12 years.
Warranty: 2 year
Control Mode:SPWM
Input Power:220V class22015%(we also stock 380V item, please contact us for stock)
5-Digits Display & Status Indicator Lamp
Working Temperature:-10~40
Humidity:0-95% Relative Humiditywithout dew
Vibration:Below 0.5G
7. 220V 4KW Water Cooled Er20 Japanese Bearing CNC Spindle Motor and Matching 4kw Variable Frequency Drive Inverter
Feature
4kw Water-cooled Motor Spindle and Matching InverterFour bearing in our spindle motor
4kw Water-cooling High Speed High Precision Spindle
Motor Numerical Engraving/grinding/milling
Water-cooled Er20 Collet Chuck
Description
Technical Parameter of 4KW Water-cooled Spindle motor1.Spec:100*250mm(Middle body Diameter 100*250mm)
2.Power:4KW
3.Voltage:220V
4.Frequency:0-400HZ
5.Speed:0-24000RPM
6.ER20 collet chuck water-cooled
7.Runout off:Less than 0.005mm
8.Grease Lubrication
Technical Parameters for 4KW Matching with Variable Frequency Drive Inverter
1.Input voltage:220V+/15%(we also stock1.5KW,3KW,4KW,5.5KW,7.5KW inverter,pls contact with us if you need)
2.Output voltage:208-240V(Analogous to Input voltage)
3.Input Frequency:48-63HZ
4.Output Frequency:0-400HZ
5.Input Phase:Suit for 1 phase input and 3 Phase input
6.Output:3 Phase
7.Warranty:two years
8. 2.2KW Water Cooled Spindle Motor ER20 Kit & 2.2kw 220V Inverter VFD 2HP & 80mm Clamp Mount & 75W Water Pump with 6M Pipe & 14pcs / Set ER20 Collet for CNC Router Engraving Milling Cutting Machine
Feature
2.2KW Water Cooled Spindle Motor ER20 220V, 2.2KW 220V HY InverterRunout off: less than 0.02mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
14PCS ER20 Collet Set ( 3.175mm,1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
This spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc
Japan NSK 4pcs bearing
Description
Package include:1x 2.2KW ER20 water-cooled spindle motor 24000rpm 80mm 400Hz
1x 2.2KW VFD Inverter 220V input with 220V output
1x 80mm clamp cast aluminium bracket
1x 75W Water pump 220V 3.2M
1x 5M water pipes
1Set of ER20 collet(14pcs)(1mm,2mm,3.175mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
1. 2.2KW Water Cooled Spindle Motor ER20
Material: Stainless Steel
Size: 80x213mm(Middle body diameter:80mmxLength:213mm)
Power: 2.2Kw
Voltage: 220VAC
Current: 8A
Frequency: 0-400Hz
Speed: 0-24000rpm
Accuracy: 0.003--0.005
Runout off: Less than 0.02mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Main application: Wood, Aluminum, Stone, metal, glass, PVC industry
2. 2.2kw Inverter VFD 220V input
Tech parameters:
1) Input Voltage: 220V(+/-15%)
2) Output Voltage 208VAC-240VAC
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
3. 80mm clamp cast aluminium bracket
Diameter: 80mm
Material: Aluminum,Cast aluminum
4. 75W CNC spindle motor water pump 3.2m 220VAC
Specification:
Pump length:3.2m
Voltage:220-240VAC
Power:75W
Flow:3000L/H
Size:150x80x140mm
Application: fit for 0.8kw,1.5kw,2.2kw,3kw,water cooled spindle even 4kw and 5.5kw too
5.ER20 spring collet:
Product Description
Out dia (D1):11.5mm
Height (H):18mm
Hole dia (D2):1-13mm
Run-out tolerance 0.1mm
First class 1065 carbon steel
Hardened & precision ground
6.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor
How to connect:
Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the(U, V, W),4 ground wire this interface safe ground
9. Four Bearing 4KW 4000W 5HP 220V Air Cooled Er20 CNC Spindle Motor Engraving Milling Grind Rpm18000
Feature
4kw Air-cooled Motor SpindleFour bearingin our spindle motor
4kw Air-cooling High Speed High Precision Spindle
Air-cooled Er20 Collet Chuck
Pass Iso9001 and CE Quality Certification
Description
Technical Parameter of 4KW Air-cooled Spindle motorSpec: 220mm*100*85 mm (Diameter:220mm lenth*100mm width x 85mm height)
Power:4KW
Voltage:220V
Frequency:300HZ
Speed:0-18000R/M
ER20 collet chuck Air-cooled
Runout off:Less than 0.005mm
Grease Lubrication
10. Four Bearing 4KW 4000W 5HP 220V Water Cooled Er20 CNC Spindle Motor Engraving Milling Grind Rpm24000
Feature
4kw Water-cooled Motor SpindleFour bearing in our spindle motor
4kw Water-cooling High Speed High Precision Spindle
Water-cooled Er20 Collet Chuck
Pass Iso9001 and Ce Quality Certification
Description
Technical Parameter of 4KW Water-cooled Spindle motorSpec:100*250mm(Middle body Diameter 100*250mm)
Power:4KW
Voltage:220V
Frequency:0-400HZ
Speed:0-24000RPM
ER20 collet chuck water-cooled
Runout off:Less than 0.005mm
Grease Lubrication
