Finding your suitable anchoring epoxy concrete is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best anchoring epoxy concrete including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Simpson Strong-Tie Anchoring Adhesive
Feature
SET1.7KTAIdeal for use with threaded rod to anchor hardware, fixtures and equipment to concrete.
Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture.
Cures in 24 hours at 65F.
May be installed in concrete, brick and concrete block. Adhesive screen required for hollow applications
Description
Ideal for use with threaded rod to anchor hardware, fixtures and equipment to concrete. Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture. Easy to use: The gel consistency makes it simple to use in horizontal or vertical applications.SET1.7KTA Ideal for use with threaded rod to anchor hardware, fixtures and equipment to concrete. Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture. Cures in 24 hours at 65F. May be installed in concrete, brick and concrete block. Adhesive screen required for hollow applications Easy to use: The gel consistency makes it simple to use in horizontal or vertical applications.
2. EPOXY ADHESIVE 9OZ MIRACLEBOND
Feature
Repairing holes and spalls in concreteRepairing rotted wood
Bonding fresh concrete to hardened concrete
Description
Miraclebond 1310 is a two-component, high strength, high modulus, moisture insensitive, non-sag, ceramic blend epoxy system. It's ideal for use as a bonding agent for almost any material, including metal, concrete, brick, wood, stone, block, glass, slate, fiberglass, tile and other substrates. Very easy to work with. Extreme Duty, Thick Non-Drip Epoxy Paste makes repairs on sidewalls, and overhead application much easier without any drip or sag. Miracle bond has excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and water. Cures Underwater, perfect for pool tile repair, and Marine Grade uses!3. SIMPSON STRONG TIE SET-XP22 22OZ EpoxyTie Cartridge
Feature
This is highly durableThis is easy to use
This is manufactured in China
Description
22 oz, epoxy tie cartridge, ideal for anchoring threaded rod, rebar & smooth dowels in a variety of base materials, offers strength & versatility across a wide variety of applications, a 1:1 two component, high solids epoxy based anchoring adhesive formulated for optimum performance in both cracked & uncracked concrete, teal color identifies as a high performance adhesive for adverse conditions, resin & hardener are dispensed & mixed simultaneously through the mixing nozzle, 24 month shelf life from date of manufacture in unopened side by side cartridge, use with edt22s epoxy dispensing tool.4. PC Products 72226 Static Mixing Nozzle for 8.6 oz PC-Concrete Cartridge (Pack of 2)
Feature
Static mixing nozzle for 8.6-oz. (9 oz.) PC-Concrete epoxy cartridgeNozzle mixes and dispenses two-part epoxy through its chambers
For 1:1 mix ratio
Description
Specialty 250ml static mixing nozzle for PC-Concrete injectable repair and anchoring epoxy.5. Sika AnchorFix -500 20oz 2-Component Epoxy Anchoring System
Feature
Fixing close to free edgesVersatile range of embedment depths
Anchoring without expansion forces
Extended working time
AnchorFix 500 has been tested according to ASTM C 881 Type I, II, III, IV, Class C, Grade 3
Description
Sika AnchorFix-500 has been specially formulated as a high-performance, two component adhesive anchor system for threaded rods and reinforcing bars in uncracked concrete to suit transport applications.6. Conspec - Anchoring Epoxy Ultrabond-1 Concrete Anchor Adhesive Fast Setting 2-Part (9-oz Tube) with Nozzle
Feature
Anchoring threaded rod, bolts and rebar dowels into concreteStandard working time, 15 ~ 20 minutes @ 75F
Moisture insensitive allowing installation & curing in damp environments, cures underwater
Wide in-service temperature range, Withstands freeze-thaw conditions
MADE IN U.S.A. Meets ASTM C881-14 Type I, II, IV & V Grade 3, Class A, B & C
Description
ULTRABOND 1 is a 2-component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 F to 110 F (4 C to 43 C). ULTRABOND 1 in cartridges has been tested in accordance with ASTM E488 and ASTM E1512 for its capability to resist static, dynamic, seismic and wind loads in uncracked concrete for both threaded rod and rebar7. Hilti Injectable Mortar Epoxy adh RE 100 - 11.1 Oz Cartridge - 2123381
Feature
Good performance in cracked and uncracked concreteSuitable for indoor and outdoor applications as well as use in all base material conditions
Storage and transportation temperature: 41F - 77F
In-service temperature - range: -40 - 158 F
Package Quantity: (1) Foil pack and (1) Mixer
Description
Good performance in cracked and uncracked concreteSuitable for indoor and outdoor applications as well as use in all base material conditions (dry, wet, watter-filled, underwater)
Extensive range of accessories available (e.g. piston plugs, steel brushes, cordless electric dispenser)
Applications: Subsitiution for misplaced or missing rebars. Rebars that are doweling and connection of secondary post-installed rebars. Anchoring secondary steel elements.
Content per can/cartridge: 11.1 fluid oz (330 ml)
Base materials: Concrete (cracked), Concrete (uncracked)
Base material condition: Dry, Submerged, Water-filled, Wet
Cleaning procedures: Compressed-air cleaning
Seismic loading: Yes
Storage and transportation temperature: 41F - 77F
In-service temperature - range: -40 - 158 F
IBC compliance: IBC 2012
Package Quantity: (1) Foil pack and (1) Mixer
Hilti Part Number: 2123381
