Finding your suitable er20 2.2kw is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best er20 2.2kw including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. 2.2KW 2200W 220V Air Cooled CNC Spindle Motor ER20 Collet 80mm Clamp CNC Router Engraving Milling Grind Four Bearing 3HP 24000rpm Motor Spindle Suitable For Medium Or Large Processing
Feature
2.2KW Air Cooled CNC Spindle Motor ER20 Collet, Voltage:220V2.2kw Air-cooling High Speed High Precision Spindle
Runout off:less than 0.05mm, Speed:0-24000rpm, AC 220V
4pcs Bearings from Germany High Quality Bearings, 4 bearings(C7005x2 + C7002x2),P4 class
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
Description
Package include:1 x 2.2KW Air-cooled spindle motor (ER20, 220V,400Hz,24000rpm,4 bearing)
Specification:
Material: Stainless Steel
Size: 80x224 mm(Middle body diameter:80mmxLength:224mm)
Power: 2.2Kw
Voltage: 220VAC
Current: 8.5A
Frequency: 0-400Hz
Speed: 0-24000rpm
Cooling: Air-cooled
Precision tapered bore: Less than0.025mm
Runout off: Less than 0.05mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4pcs Germany High quality bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Net Weight: 5.2kg
Main application: Wood, Aluminum, Stone, metal, glass, PVC,PCB etc industry
Power Interface: Optional GX16 waterproof air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground.
2. Huanyang Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz ER20 Collet for Engraving Machine
Feature
The item is Water Cooled 220V-2.2KW 4 bearings 80mm 400hz spindle motorNOTE:Need to be equipped with frequency converter to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle
stable performance,high precision bearing
operating speed:6000rpm-24000rpm
Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
Description
Applicable VFD https://www.amazon.com/dp/B0775S7KFW?th=1Introduction
The bearing adopts high speed angular contact bearing.And shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.
Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding.
Lubricated with grease, which is resistant to 200 degrees high temperature.
specification :
Material: The cover is made of stainless steel, and the water jacket is high compression casting aluminum tube, red copper coil.
Bearing: 7005 (2pcs)and 7002(2pc) bearings
Voltage and rated current: AC 220V, 5A
Max Rotation Speed:24000 RPM
Radial runout:0.01mm
Coaxality: 0.025mm (2.5 microns)
Frequencies: 400Hz
Size:80*213 (mm)
Collet: ER20 collet, 6mm is standard
Nut model: ER20-A(B)
Cooling way: water cycling cooling way
Lubrication way: high temperature resistance grease lubrication
Power interface: GX16 water proof aviation plug marked with number 1, 2, 3, 4. Number 1, 2 and 3 inter-faces are connected with inverter power U, V, W respectively. Number 4 is connected with earth wire
3. Konmison CNC Spindle Motor Kits Milling Spindle Motor 80MM 2.2KW + 13pcs ER20 Collet + 80MM Clamp Mount + Inverter + 5M Water Pipe + Water Pump
Feature
80MM 2.2KW Water Cooled Spindle Motor, Voltage: 220V, Run out off: less than 0.001mm, Speed: 0-24000rpm.The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
Main Application: Engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board (ABS) and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working, but not milling working
Package include: 2.2KW Spindle Motor*1, 2.2KW VFD*1, 75W Water Pump*1, 5M Water Pipes*1, 80mm Spindle Clamp (Free 3pcs screws)*1, ER20 Collet*13.
Description
1.Spindle Motor:
Size: 80mm
Power: 2200W
Voltage: 220V
Frequency: 0-400Hz
Speed: 0-24000rpm
Water Cooling ER11 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Grease Lubrication
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
2.Inverter:
Type: 2.2KW/220V
Input: 220VAC/50Hz
Output: 0-220VAC 3-phase
Frequency: 0-400Hz
Size: 168x124x161mm
3.ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")
4.Water Pump:
Voltage: 220V
Structure: Single-stage Pump
Pressure: High Pressure
Application: Submersible
Usage: Water
5.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor
6.Spindle Motor Clamp Mount:
Diameter: 80mm
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing
Package include:
1 x 2.2KW Spindle Motor
1 x 2.2KW VFD
1 x 75W Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
4. MYSWEETY 1Set DIY 110V 2200W Air Cooled Spindle Motor CNC Spindle Motor 80MM 2.2KW + 110V 2.2KW Converter + 13pcs ER20 Collet + 80MM Clamp
Feature
110V 2.2KW Air Cooled Spindle Motor, 2.2KW 110V HJ Inverter, don't need any transformer, easy for you to use.Runout off: less than 0.005mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
13PCS ER20 Collet Set Gripping Range:(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
100% satisfactory, if you have any problem, please contact us, we will help your money back.
Description
1.Spindle Motor:
Size: 80mm
Power: 2200W
Voltage: 110V
Frequency: 0-400Hz
Speed: 0-24000rpm
Air Cooling ER20 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Grease Lubrication
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
2.Inverter:
Type: 2.2KW/110V
Input: 110VAC/50Hz
Output: 0-220VAC 3-phase
Frequency: 0-400Hz
Size: 168x124x161mm
3.ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")
4.Spindle Motor Clamp Mount:
Diameter: 80mm
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing
Package include:
1 x 110V 2.2KW Spindle Motor
1 x 110V 2.2KW VFD
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
5. Waterproof 2.2KW Water Cooled CNC Spindle Motor ER20 24000rpm 220V 8A 400Hz 80x226mm Carved Metal Spindle for CNC Router Milling Engraving Machine Machining
Feature
4pcs Bearings from Germany High Quality Bearings, 4 bearings(C7005x2 + C7003x2),P4 classPrecision tapered bore 0.01mm, Runout off: Less than 0.02mm
this Spindle motor is Waterproof ,can be use metal ( steel, Aliminum,etc)
our Spinlde motor can be use Carved metal, If you want looking for Inverter (VFD) for this motor, we suggest use: https://www.amazon.com/dp/B076WYN9V8
Main application: Wood, Aluminum, Stone, metal, glass, PVC industry
Description
Package include:1 x 2.2KW ER20 water-cooled spindle motor Waterproof(long length and high torque)
Specification:
Material:Stainless Steel
Size: 80x226mm (long length and high torque)
Power: 2.2Kw
Voltage: 220VAC
Current: 8A
Frequency: 0-400Hz
Speed: 10-24000rpm
Cooling: Water-cooling
Precision tapered bore: 0.01mm
Runout off: Less than 0.02mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4 bearings(C7005x2 + C7003x2),P4 class
Net Weight: 6.1kg
Power supply interface: Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W),4 is blank,do not connection
Main application: Wood, Aluminum, Stone, metal, glass, PVC industry
If you want looking for Inverter (VFD) for this motor, we suggest use: https://www.amazon.com/dp/B076WYN9V8
6. 220v 2.2kw Air Cooled Er20 Japanese Bearing CNC Spindle Motor and Matching 2.2kw Variable Frequency Drive Inverter
Feature
2.2kw Air -cooled Motor Spindle and Matching InverterFour bearing in our spindle motor
2.2kw Air -cooling High Speed High Precision Spindle
Motor Numerical Engraving/grinding/milling
Air -cooled Er20 Collet Chuck
Description
Technical Parameter of 2.2KW Air -cooled Spindle motor1.Spec: 80*215 mm (Diameter:80mm x Length:215mm)
2.Power:2.2KW
3.Voltage:220V
4.Frequency:0-400HZ
5.Speed: 0-24000 R/min
6.AIR- Cooling
7.Runout off:Less than 0.005mm
8.Grease Lubrication
Technical Paramer for 2.2kw Variable Frequency Drive inverter
1.Input voltage:220V+/15%(we also stock1.5KW,3KW,4KW,5.5KW,7.5KW inverter,pls contact with us if you need)
2.Output voltage:208-240V(Analogous to Input voltage)
3.Input Frequency:48-63HZ
4.Output Frequency:0-400HZ
5.Input Phase:Suit for 1 phase input and 3 Phase input
6.Output:3 Phase
7.Warranty:two years
7. 2.2KW Water Cooled Spindle Motor ER20 Kit & 2.2kw 220V Inverter VFD 2HP & 80mm Clamp Mount & 75W Water Pump with 6M Pipe & 14pcs / Set ER20 Collet for CNC Router Engraving Milling Cutting Machine
Feature
2.2KW Water Cooled Spindle Motor ER20 220V, 2.2KW 220V HY InverterRunout off: less than 0.02mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
14PCS ER20 Collet Set ( 3.175mm,1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
This spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc
Japan NSK 4pcs bearing
Description
Package include:1x 2.2KW ER20 water-cooled spindle motor 24000rpm 80mm 400Hz
1x 2.2KW VFD Inverter 220V input with 220V output
1x 80mm clamp cast aluminium bracket
1x 75W Water pump 220V 3.2M
1x 5M water pipes
1Set of ER20 collet(14pcs)(1mm,2mm,3.175mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
1. 2.2KW Water Cooled Spindle Motor ER20
Material: Stainless Steel
Size: 80x213mm(Middle body diameter:80mmxLength:213mm)
Power: 2.2Kw
Voltage: 220VAC
Current: 8A
Frequency: 0-400Hz
Speed: 0-24000rpm
Accuracy: 0.003--0.005
Runout off: Less than 0.02mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Main application: Wood, Aluminum, Stone, metal, glass, PVC industry
2. 2.2kw Inverter VFD 220V input
Tech parameters:
1) Input Voltage: 220V(+/-15%)
2) Output Voltage 208VAC-240VAC
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
3. 80mm clamp cast aluminium bracket
Diameter: 80mm
Material: Aluminum,Cast aluminum
4. 75W CNC spindle motor water pump 3.2m 220VAC
Specification:
Pump length:3.2m
Voltage:220-240VAC
Power:75W
Flow:3000L/H
Size:150x80x140mm
Application: fit for 0.8kw,1.5kw,2.2kw,3kw,water cooled spindle even 4kw and 5.5kw too
5.ER20 spring collet:
Product Description
Out dia (D1):11.5mm
Height (H):18mm
Hole dia (D2):1-13mm
Run-out tolerance 0.1mm
First class 1065 carbon steel
Hardened & precision ground
6.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor
How to connect:
Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the(U, V, W),4 ground wire this interface safe ground
8. MYSWEETY 1Set DIY 110V 2200W Water Cooled Spindle Motor CNC Spindle Motor 80MM 2.2KW + 13pcs ER20 Collet + 80MM Clamp + Converter + 5M Water Pipe + 110v Water Pump+ 70mm Brush + Drill Bits
Feature
Purchase 110V 2200W Water Cooled Spindle Motor can get free the power supply, add the power supply and 110V 2200W Water Cooled Spindle Motor to cart together before you checkout.Runout off: less than 0.005mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
13PCS ER20 Collet Set Gripping Range:(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
100% satisfactory, if you have any problem, please contact us, we will help your money back.
Description
1.Spindle Motor:
Size: 80mm
Power: 2200W
Voltage: 110V
Frequency: 0-400Hz
Speed: 0-24000rpm
Water Cooling ER20 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Grease Lubrication
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
2.Inverter:
Type: 2.2KW/110V
Input: 110VAC/50Hz
Output: 0-220VAC 3-phase
Frequency: 0-400Hz
Size: 168x124x161mm
3.ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")
4.Water Pump:
Voltage: 110V
Structure: Single-stage Pump
Pressure: High Pressure
Application: Submersible
Usage: Water
5.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor
6.Spindle Motor Clamp Mount:
Diameter: 80mm
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing
Package include:
1 x 110V 2.2KW Spindle Motor
1 x 110V 2.2KW VFD
1 x 110V 75W Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
9. RATTMMOTOR 2.2KW Air Cooled Spindle Motor ER20 Kit + 2200W 2.2kw 220V Inverter VFD 3HP + 80mm Clamp Mount + 14pcs/Set ER20 Spring Collet for CNC Router Engraving Milling Machine
Feature
2.2KW Air Cooled CNC Spindle Motor ER20 Collet, Voltage:220V 2.2KW Inverter VFD 220VRunout off:less than 0.05mm, Speed:0-24000rpm, AC 220V Variable Frequency Drive, Frequency of Inverter: 0-400Hz
80mm aluminum Clamp Bracket with 3Pcs screw
14PCS ER20 Collet Set Gripping Range:( 3.175mm,1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
Description
Package include:1 x 2.2KW ER20 Air-cooled spindle motor 220V
1 x 2.2KW Inverter VFD 220V input with 220V output
1 x 80mm clamp cast aluminium bracket
1set of ER20 collet(14pcs) ( 3.175mm, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
1.spindle motor:
Specification:
Material: Stainless Steel
Size: 80x230mm(Middle body diameter:80mm x Length:230mm)
Power: 2.2Kw
Voltage: 220VAC
Current: 8.5A
Frequency: 0-400Hz
Speed: 0-24000rpm
Cooling: Air-cooled
Accuracy: 0.003--0.005
Runout off: Less than 0.05mm
Bearings: 4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Power Interface: Optional GX16 waterproof air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground.
2.2kw Inverter VFD 220V
1) Input Voltage: 220V(+/-15%),
2) Output Voltage 208Vac-240VAC
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
3. 80mm cast aluminium bracket
Diameter: 80mm
Material:Aluminum,Surface sandblasted
4. ER20 Collet Set
Product Description
Out dia (D1):11.5mm
Height (H):18mm
Hole dia (D2):1-13mm (1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm)
Run-out tolerance 0.1mm (0.006")
First class 1065 carbon steel
Hardened & precision ground
Main application: Wood, Aluminum, Stone, metal, glass, PVC,PCB etc industry
10. Square 2.2KW/2200W Quality Air-cooled Spindle Motor ER20 24000rpm 220V/AC 6A 400Hz CNC Engraving Router Milling Grinding Cutting Machines Suitable For Medium Or Large Processing
Feature
4PC Ceramic bearing,Runout off less than 0.01mmtapered bore: less than 0.005mm, If you want looking for Inverter (VFD) for this motor, we suggest use: https://www.amazon.com/dp/B076WYN9V8
Wiring:The spindle's terminal U1 connect Inverter's U,spindle's terminal V1 connect Inverter's V,spindle's terminal W1 connect Inverter's W,the inverter's terminal R ,S , T any 2 pins connect 220VAC
4pcs Bearings from Germany High Quality Ceramic bearing Bearings, 4 bearings(C7005x2 + C7002x2),P4 class
Main application:Wood, Aluminum, Stone, metal, glass, PVC industry
Description
Package include:1 x 2.2Kw Square ER20 Air-cooled spindle motor (220V,24000rpm,4 bearing,400Hz)
Specification:
Material: Stainless Steel
Size:
Power: 2.2Kw
Voltage: 220V/AC
Current: 6A
Frequency: 400Hz
Speed: 24000rpm
Cooling: Air-cooled
Runout off: Less than 0.01mm
Precision tapered bore: less than 0.005mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4pcs Ceramic bearing,P4 class
Power supply interface:connector Wiring:The spindle's terminal"U1"connect Inverter's"U"spindle's terminal"V1"connect Inverter's"V"spindle's terminal "W1" connect Inverter's "W"the inverter's"R","S", "T"any "2" terminal connection "220VAC"
Main application:
Wood, Aluminum, Stone, metal, glass, PVC industry
If you want looking for Inverter (VFD) for this motor, we suggest use: https://www.amazon.com/dp/B076WYN9V8
