Finding your suitable frsky xm receiver is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best frsky xm receiver including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S
Feature
Number of channels: 16(S-Bus) : 8(CPPM)RSSI output: analog voltage output (0~3.3V)
Operating Range: >1.5km (Full Range)
Operating Current: 100mA@5V
Operating Voltage: 4 - 10.0V
Description
Weighing in at 4.3 grams (including connection cable) and smaller than the X4R, this little receiver is a great choice for micro multirotors. The XSR is SmartPort enabled and has S-bus as well as CPPM outputs. However we needed to give some things up so it could be smaller. The XSR does not support FBVS nor PWM and the antennas are soldered on instead of utilizing IPX connectors.2. Frsky XM Plus Mini Full Range Receiver Failsafe D16 Mode Support SBUS Up Compatible With Frsky X9D / X9D Plus X9E X12S Transmitter.
Feature
1. It's a full range receiver, similar range to X4R-SB and XSR, Much smaller size and lighter weight2. It's possible to direct solder RX to FC with header pins without wires (if FC supports it)
3. XM+ is even smaller than the LR1000 by FuriousFPV, great RX option for their micro quads (such as the Moskito70)
4. Only downside of XM+ RX is the lack of S.Port full telemetry (Smart Port), there is only RSSI telemetry. RSSI has a dedicated solder pad and it's also available on the 16th channel.
5. RSSI pin outputs PWM signal (0-3.3V). Please be aware that this signal should not be connected to MinimOSD directly, as it will give you 0% or 100% only. You will need a digital to analogue converter (low pass filter) to convert PWM to analogue voltage level.
Description
General This insanely tiny 2.4GHz diversity receiver available Package Including Frsky XM Plus receiver3. FrSky Ultra Light FrSky XM Receiver up to 16CH for X9D PLUS Q X7 X9E
Feature
Ultra Light!!!!!! Weight: 1gDimension:15x10x3.5mm(LxWxH)
Compatibility:FrSky D16 mode
Firmware Upgradeable
Number of Channels:Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC
Description
Ultra Light!!!!!!Specification:
- Dimension:15x10x3.5mm(LxWxH)
- Weight: 1g
- Number of Channels:Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC
- Operating Voltage Range:3.5~10V
- Operating Current:20mA@5V
- Operating Range:>600m
- With RSSI output on board:Analog 0~3.3V
- Firmware Upgradeable
- Compatibility:FrSky D16 mode
4. Usmile Tiny 8CH PPM SBUS Receiver for Frsky X9D PLUS Q X7 X9E DJT DFT Micro Carbon Fiber Quadcopter frame Blade inductrix Tiny whoop frame
Feature
This may be the smallest and lightest Frsky compatible Rx yet to find, Compatible with FRSKY ACCST X9D(Plus)DJT/DFT/DHTWork mode :D8 Mode Output: PPM/SBUS
Weight: 3g, Dimensions: 12 x 25mm, Working voltage: 5V
Binding procedure 1) With the receiver powered down, turn on your Taranis, be sure the model Mode is to D8, then put it in Bind mode. 2) While holding down the button on the receiver apply power. Wait a few seconds, then release the button. The LED should be a steady green. 3) Take the Tx out of Bind mode =) https://www.dropbox.com/s/iwy5em74ntrtdy6/FD801%20Receiver%20Manual.doc?dl=0
Suit for brushed Quadcopter and other small size quads
Description
This may be the smallest and lightest Frsky compatible Rx yet to find, Compatible with FRSKY ACCST X9D(Plus)DJT/DFT/DHTWork mode :D8 Mode Output: PPM/SBUS
Weight: 3g, Dimensions: 12 x 25mm
Working voltage: 5V
Suit for brushed Quadcopter
Other parts you might be interested:
5.8G fpv receiver for Android phone http://www.amazon.com/dp/B06ZZG6GSR
Self-binding Micro DSM2 DSMX receiver http://www.amazon.com/dp/B01NAEN5RG http://www.amazon.com/dp/B01JWFCRYA
4mm thick 210 Frame http://www.amazon.com/dp/B06XXH6JXG https://www.amazon.com/dp/B07219Q4TX http://www.amazon.com/dp/B071WVNFMM
F450 frame https://www.amazon.com/dp/ B016OBSW08
25mW/ 100mW / 200mW Switchable AIO FPV Camera http://www.amazon.com/dp/B06Y6G19FQ
65mm frame https://www.amazon.com/dp/B06Y6J49HS
80mm frame https://www.amazon.com/dp/B071LM4ZGQ https://www.amazon.com/dp/B071VYNXGL
88mm framehttps://www.amazon.com/dp/B06ZZG62PX/
112mm 4mm thickness frame http://www.amazon.com/dp/B01N6KBFQH
130mm framehttps://www.amazon.com/dp/B01M27Y92D http://www.amazon.com/dp/B019V9SYVC
5. EMAX Babyhawk Bind-N-Fly Micro Brushless Quadcopter Built in FrSky XM+ Receiver
Feature
520tvl cmos camera, 5. 8g 40ch vtx. 25mw / 200mw adjustable power for different flying environment.Emax femto micro f3 flight controller with stm32f303 cpu and mpu9250, ideal for micro brushless racing drone.
Furious flight and accurate operation with 1104 5250kv high rpm brushless motors and bullet series dshot escs.
Description
The Emax Babyhawk just got better with a FrSky XM plus receiver pre-installed and an upgraded 40ch adjustable power from 25-200mw, 800TVL camera VTX combo
Babyhawk Specification
- Diagonal wheelbase (without propeller): 87mml Maximum size of aircraft (without antenna, cable): 132mm*132mm*48mm
- Camera integrated with VTX: CMOS 800TVL_25-200MW adjustable frequency 40CH
- Propeller: 2345 Tri-blade propeller
- Flight controller: F3 Femto
- Motor: 1104 5250KV
- ESC: Bullet 6A (BLHeli_S)
- Weight of aircraft (without batteries): 68.5g
FrSky XM Plus receiver Specification
- Dimension: 21.5*12*3.5mm (L*W*H)
- Weight: 1.6g
- Operating range: Full range
- Operating voltage range: 3.7V-10V
- Operating current: 30mA@5V
- Number of Channels: Up to 16 CH from SBUS (CH1-CH15 for PWM, CH16 RSSI for FC)
- Compatibility: FrSky Taranis X9D/ X9D Plus/ Q X7/ X9E/ Horus X12S/ XJT in D16 mode
Include
- Babyhawk quadcopter *1 set
- FrSky XM Plus receiver ( US mode )
- 2345 Tri-blade Propeller CW and CCW *4 pcs each
- Battery *1 pcs
- Manual *1 set
6. Crazepony Strap and Frsky XMPF3E Flight Control Board ( Built-in F3 EVO Flight Controller and XM+ Plus Receiver )
Feature
Latest Accelerometer, Gyro and Compass and Baro sensor technology. Built-in F3 EVO FC and XM+ receiverTM32F303 CPU (72Mhz inc FPU),MPU9250 (accelerometer/gyro/compass)BMP280 barometer for F3ECC2510 CPU for XM+ receiver
Compatible with FrSky Taranis X9D/X9E/ Horus X12S/XJT in D16 mode. 6 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.
Channels: 16CH (8CH is RSSI) by SBUS to UART2 Rx of F3E. Operating Voltage Range: 4.010V . Dimension: 36366mm (L W H) with 30.5mm mounting holes
XM+ receiver is a one-way receiver (no telemetry), it will receive the commands of Remote Control and send to F3E by SBUS (8CH is RSSI) to UART2 Rx of F3E
Description
SpecificationsModel name: XMPF3E
Dimension: 36366mm (L W H) with 30.5mm mounting holes
Hardware: STM32F303 CPU (72Mhz inc FPU), MPU9250 (accelerometer/gyro/compass), and BMP280 barometer for F3E, CC2510 CPU for XM+ receiver
Weight: 7g
Channels: 16CH (8CH is RSSI) by SBUS to UART2 Rx of F3E
Operating Voltage Range: 4.0~10V
Operating Current: 100mA5V
Compatibility: FrSky Taranis X9D/X9E/ Horus X12S/XJT in D16 mode
Firmware Upgradeable
Features
Built-in F3E and XM+ receiver module
Features the latest Accelerometer, Gyro and Compass and Baro sensor technology.
XM+ receiver is a one-way receiver (no telemetry), it will receive the commands of Remote Control and send to F3E by SBUS (8CH is RSSI) to UART2 Rx of F3E
6 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.
Software
The F3E runs the open-source Cleanflight/Betaflight flight control (FC) software and firmware upgradeable (SPRACINGF3EVO), the factory firmware is betaflight_3.0.0_SPRACINGF3EVO.
The XM+ receiver runs the software which was developed by FrSky and firmware upgradeable.
Package Including
1 * Frsky XMPF3 Flight Control Board
1 * Cable
5 * Pins
7. FrSky NEW XMF3E Flight Controller Built-in F3EVO and XM receiver module 29mm X 29mm
Feature
Built-in F3EVO and XM receiver module(Notice: XM receiver is a one-way receiver (no telemetry), it will receive the commands of Remote Control and send to F3EVO by SBUS (8CH is RSSI) to UART2 Rx of F3EVO)
Features the latest Accelerometer, Gyro and Compass and Baro sensor technology.
Description
Finally a solution from FrSky for all those micro brushed quads. F3EVO running betaflight and fully firmware upgradeable. Pre-soldered connectors makes this unit ready to install and bind. Upgrading your Tiny Whoop has never been easier.Specifications:
- Dimension: 29296mm (L W H)
- Hardware: STM32F303 CPU (72MHz inc FPU), MPU9250 (accelerometer/gyro/compass), CC2510 CPU for XM receiver
- Weight: 3.4g
- Channels: 16CH (8CH is RSSI) by SBUS to UART2 Rx of F3EVO
- Operating voltage/current: 4.2V@75mA
- Compatibility: FrSky Taranis X9D/X9E/Q X7/ Horus X12S/XJT in D16 mode
- Firmware Upgradeable
The F3EVO runs the open-source Cleanflight/Betaflight flight control (FC) software and firmware upgradeable (SPRACINGF3EVO), the factory firmware is betaflight_3.0.0_SPRACINGF3EVO.
The XM receiver runs the software which was developed by FrSky and firmware upgradeable.
8. FrSky XM+ Ultra Mini Receiver ONLY 1.6g
Feature
Ultra Mini Only 1.6g!!!Description
Ultra Mini Only 1.6g!!!Specification:
- Dimension:21.5x12x3.5mm(LxWxH)
- Weight: 1.6g
- Number of Channels:Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC)
- Operating Voltage Range:3.7~10V
- Operating Current:30mA@5V
- Operating Range:FULL range
- With RSSI output on board:Analog 0~3.3V
- Firmware Upgradeable
- Compatibility:FrSky D16 mode
9. FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter White | FrSky XM+ for FREE
10. FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter Black | FrSky XM+ for FREE
11. Toolcool Frsky XM+ Micro D16 SBUS Full Range Receiver Up to 16CH
Feature
Dimension: 21.5*12*3.5mm(L x W x H)Weight: 1.6g
Number of Channels: Up to 16CH from SBUS (1-15ch for PWM,16ch RSSI for FC)
Operating Voltage Range: 3.7-10V
Compatibility: FrSky D16 mode
Description
This insanely tiny 2.4GHz diversity receiver available from TBS is the next big thing in miniaturization of racing craft. Weighing in at under 2g, this receiver is perfect for those racers who are looking to lower their AUW. These are rated to full range, so identical to your X4R and D4R setups.Specification
Dimension: 21.5*12*3.5mm(L x W x H)
Weight: 1.6g
Number of Channels: Up to 16CH from SBUS (1-15ch for PWM,16ch RSSI for FC)
Operating Voltage Range: 3.7-10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0-3.3V
Firmware Upgradeable
Compatibility: FrSky D16 mode
Note: The antenna is 10cm
Package Included:
1 X Receiver
12. FrSky Apus MQ60 Bind and Fly Integrate with FrSky XM Receiver (Sky Blue)
Feature
Lightweight5 minutes of flying time
Solid frame and strong blade protection
Support 2 binding modes (automatic and manual)
Fly without having to adjust the parameters after binding
Description
The FrSky Apus MQ60 mini quadcopter is perfect for the indoor racing enthusiast. The built-in FrSky XMF3E flight controller supports 2 methods (automatic & manual) of the binding process for all FrSky transmitters. The lightweight design, measuring 66.5mm at the wheelbase and 20g of weight means it's convenient to take anywhere. The solid frame and the strong motor protection ensure you'll stay in the air in the most demanding indoor environments.
Specifications:
- Model name: Apus MQ 60
- Wheelbase: 66.5mm
- Weight: 20g (Without battery)
- Size: 84mmx 84mmx58.5mm
- Color: Two colors (To be determined)
- Flight controller: XMF3E (Integrate with XM receiver)
- Firmware version: betaflight_3.0.0_frsky(can be upgraded)
- Motor: 615 coreless
- Prop Size: 31mm 4 blades props
- Camera: NTSC 672X492
- Video Transmitter: 5.8G 48CH 25mW
- Battery: 3.7V 200mAh 25C Li-Po battery
