Finding your suitable hydraulic press plates is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best hydraulic press plates including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Sunex 57KIT6 6-Piece Press Punch Kit
Feature
For use with presses up to 50 tons1/2", 1" and 2" punches
Two 14" x 3" x 1" steel press plates
Description
This kit comes with 6 pieces which includes 1/2", 1" and 2" punches which are made of precision machines, cold finished 1018 steel and are yellow zinc plated for durability. It also includes two 14" x 3" x 1" steel press plates and one bearing shield. For use with presses up to 50 ton capacity.2. 20 TON Press Brake DIY Builder Kit
Feature
Made in the USAPress brake kit comes unassembled, you do the final assembly and welding.
Press brake kit includes an adjustable back stop and side stop for accurate and repeatable bends.
Built out of high strength 1/4" steel 2.00" wide bottom die.
Description
This SWAG Offroad Press Brake kit is a DIY Builder Kit, you do the welding and assembly. Designed to fit the Harbor Freight 20 ton hydraulic press Item # 32879 & 60603. Max Bending Radius (deg.) 110 Max. Bending Capacity 3/8" plate Max Bending Width 19.25" Total width of the brake is 22.125" wide It Is capable of bending mild steel in the following length and thickness. 19" = Full bending width of the bottom die on anything 1/8" or thinner. 15" in 3/16" 12" in 1/4" 5" in 3/8"3. Arbor Press Plates 8.50" X 10.00" X 1.5"
Feature
Made in the USAThese arbor plates are cut out of high strength grade 50-A572 steel plate.
These arbor press plates are to replace the junk cast arbor plates that are prone to shattering.
Description
Arbor Press Plates (Pair) Cut out of high strength grade 50-A572 steel plate. These arbor press plates are to replace the junk cast arbor plates that are prone to shattering under heavy load. We currently offer 4 different sizes of arbor plates 7.00" X 7.00" X 1.0" Ideal size for factory replacement of the 12 ton Harbor Freight cast arbor plates 8.50" X 10.00" X 1.50" Ideal size for factory replacement of the 20 ton Harbor Freight cast arbor plates 9.75" X 9.75" X 1.50" 12.00" X 12.00" X 1.50" The low cost cast arbor plates that are typical provided with hydraulic presses, often fail under shock loading. Learn from others and look at the 3rd picture above provided by Mud Slayer 2.0 on Pirate4x4 who was generous enough to provide the story below. "I was pressing on a bushing using a Harbor Freight 20 ton press with the provided cast arbor plates. I felt the bushing starting to get stiff. about 1/4" left to go I gave one good pull and I heard POW! I felt like I had been punched in the face by a gorilla as the cast arbor plate had just exploded. One of the guys in the shop came over to check on me and said "Dude you're face is bleeding" I had a gash right next to my left eye. I was driven to the Dr. office where I got 8 stitches. I was told I was very lucky I didn't lose my eye. When I returned to the shop I was looking at the press and noticed the porous nature of the arbor plates. This was the day I learned about the material properties of Cast Iron.".4. Titan 12 Ton Hydraulic Shop Floor Press H Frame 24000 lb w/ Heavy Duty Steel Plates
Feature
Usage: Easy to use press for large or small shops; Many different kinds of metalworking jobs, including bending, stamping, and moreQuality Design: Open side construction lets you work on long work pieces; Easily assembled and adjusted
Versatility: Crossbeams are easily adjustable for convenient pressing of U joints, removing or installing bushings, straightening fork tubes, etc.
Dimensions: 51 1/2" tall x 19 3/4" wide x 3 1/4" deep; Adjustable hole spacing: 3 1/2" apart; Handle - 19 1/2"
Included: Press, square Arbor plates, hydraulic ram
Description
The Titan Attachments 12-ton shop press is great for stamping, straightening, pressing, bending and doing bearing work for any of your metalworking needs.Easily create massive pressure for your press-out and arbor jobs. Set it over your bench to get the best working height for removing or installing joints, gears, bearings, pulleys, and bushings.
You can also use it for electric motor and armature repair or installing, and removing pressure-fitted parts. The red powder-coated finish provides a durable coating and attractive addition to your shop, garage, or anywhere you want to do a variety of work.
Included press plates increase the work you can do. Titan Attachments sells a wide variety of shop and industrial equipment, such as cranes, presses, mobile bases and roller stands.
Features:
- Heavy duty H-Frame Steel Construction
- Easy pumping system has long handle
- Slide over tables that fit between the sides
- 24" Working range
- Single-acting spring-return hydraulic ram works hard and returns quickly for speedy work
- Excellent for pressing, straightening, bending & stamping components
- Adjustable lower bolster platform
Specifications:
- Platform: 3 1/2" x 6 1/2"; Black press plates: 3" x 6 1/4"
- Height: 51 1/2" tall x 19 3/4" wide x 3 1/4" deep
- Adjustable hole spacing: 3 1/2" apart
- Handle: 19 1/2"
- Material: Steel
- Color: Red
5. Dake F-10 Model Manual Utility Hydraulic Floor Press, 10 Ton Capacity, 24" Length x 28" Width x 60" Height
Feature
Single-speed hydraulic handpump lowers the ram of the floor-mount press with up to 10 tons of forceAdjustable-height table within the H-frame enables proper positioning of large and bulky items
Movable workhead facilitates off-center pressing
Release valve initiates and controls ram return after downstroke
Includes a flat ram nose, a reduced-step nose, and two table plates for precise pressing and support
Description
The Dake F-10 model manual utility hydraulic floor press uses a single-speed hydraulic handpump to lower the ram with up to 10 tons of force to facilitate pressing and forming. The channel iron H-frame accepts large and bulky items, and the hoist adjusts the table height for proper positioning. The workhead is movable to adjustment for off-center pressing. The hydraulic cylinder and pump handle can be positioned on either side of the press to maximize workspace and comfort. The release valve turns to release the hydraulic pressure, initiating ram return after downstroke. Closing the valve at any point during the ram return will halt the ram.
Two interchangeable ram noses are included: a flat nose piece for use in standard pressing operations, and a step-reduced nose piece for supporting, positioning, or fitting into pieces when pressing. The two table plates provide support during pressing. The press has a gauge with a 2-1/2"-dia. display for pressure readings. The base has four 7/16"-dia. holes for floor mounting. Mounting hardware is not included. Hydraulic oil is not included. Press requires some assembly.
Specifications | |
---|---|
Load capacity | 10 tons |
Max. working height | 38 inches |
Min. working height | 0 to 4 inches |
Ram travel | 6 inches |
Table dimensions | 16-3/4 x 3 inches (W x L) |
Press overall dimensions | 60 x 24 x 28 inches (H x W x L) |
Weight | 225 lb. |
H is height, the vertical distance from the lowest to highest point of the press; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.
Hydraulic presses use fluid pressure to transmit a compressive force, which stays constant throughout the length of the ram's stroke. Metal forming is one common use of a hydraulic press.
Dake Machine Tools manufactures arbor presses, hydraulic presses, drill presses, power hammers, band and cold saws, belt grinders, tube benders, and auto feed systems. The company, founded in 1887, is headquartered in Grand Haven, MI.
What's in the Box?
- Dake F-10 press
- Flat ram nose
- Step-reduced ram nose
- (2) Table plates
6. Sunex 5740AH Fully-Welded Air/Hydraulic Shop Press, 40 Tons
Feature
Proudly made in the USAFully welded design for superior durability and strength
Convenient air motor design eliminates need for pumping
Versatile sliding head adapts to project needs
Includes bed plates and bearing shield
Description
Sunex's 40-ton air/hydraulic shop press features a fully welded design for superior durability and strength. Other features include a versatile sliding head that adapts to project needs, bed plates and bearing shield, and a convenient air motor design that eliminates the need for pumping. Proudly made in the USA.7. Hydraulic Jack Shop Press Floor Adjustable Heavy Duty Excellent Bending Stand 12 Ton Equipment H-Frame Plates - House Deals
Feature
12 Ton H Frame Industrial Heavy Duty Floor Shop Press Hydraulic Jack Excellent Bending High Quality Stand EquipmentBolted Adjustable Cross Beams Easily Raise & Lower
Tables Quickly Can Be Adjusted For Height & Includes Table Plates
Heavy Duty Springs Loaded Retracting Ram Carriage
It comes only with House Deals unique E-BooK
Description
12 Ton H Frame Industrial Heavy Duty Floor Shop Press Hydraulic Jack Excellent Bending High Quality Stand Equipment It comes only with House Deals unique E-BooK Easily Install Bearings, & Pulleys Seals, Bushings . Straighten Axles, Shafts, & Rods. Best for Bending - Bonding Or Straightening Applications Specifications Material: Steel Load Overall Height: 51" Weight: 95 Lbs Work Distance: 0-19.6"-54cm Bolted Adjustable Cross Beams Easily Raise & Lower8. Tuopuke Rosin Press 3x5'' Plates Heavy Duty Dual PID Controller with Wired Heating Rod Cartridge 6061 Aluminium Include Carrying Case
Feature
0F to 415F in minutes!, These heavy duty plates can generate more that enough heat and withstand up to 20ton. Best of all, the plates are heated to the right temperature with an electronic control box! You don't have to jerk around with boiling plates, or using a blow torch like some other presses.If you have ever pressed rosin before, you should have a pretty good idea of what to do and how easy this is to use. Building your own press will save you a ton of cash and work as well if not better than other presses that are double the price
Before you press the rosin,you'd better prepress the material.It is increase the yield and purity
wired the pids and heaters,it is safe and fast heating up .The pid controller is XMT7100 PCB,best of all pid controller
After service,1 year free accessory replacement
Description
Dual controller . 2pcs Aluminium heat press plates,upper plates,120*80*45mm,down plates 120*80*40mm110V US plug temperature control box,0-415F
Both upper and down plates are available to heat up. The screw diameter is 8mm,could be screwed on tightly. Heat plates are made by aluminium,light but heavy duty use heating. Fast heating and time setting available It is the best choice for DIY rosin press. Why it is useful for heavy duty rosin press?Because the plates are made by aluminium,it is 40mm thickness,the normal one is only 15mm.It is compatible for 8000psi or more big pressure machine DIY rosin press kits,include the wires,temperature control box,both heat plates are able to be heating up
The rosin press plates are used for manual ,hydraulic and pneumatic rosin press
40mm thickness 6061Aluminium Four Points to Make Rosin
1.Choose The Starting Plant Material.Better to choose the enough trichomes or crystals material
2. Applying Intense Force.Quick clam fits the need of rosin tek
3. The Right Temperature.Rosin is pressed with temperatures from 170F to 300F, with most target temperatures around 200F. At temperatures above 315F you begin to degrade the psychoactive chemicals
4. Length of Time.Press the plant material and watch the extract seeping out of the plates onto the parchment,the length of the time is very important.
9. Tuopuke Shop Press Kit Rosin Press Set up 6061 Aluminium Plates 3'' x 5'' Solid Plates 110V Heating Rod
Feature
Fast Shipping By DHL Rosin press kits include 2pcs 6061 aluminium plates,2pcs 110v heating rod,1pcs dual controller3in by 5in aluminium plates ,top plates with 50mm diameter circle,the shaft below 50mm is fitted
6 screws and 1pcs spanner included
110 US plug power cord included
Holes for cartridge heaters heating up fast
Description
Dual controller . 2pcs Aluminium heat press plates,upper plates,120*80*45mm,down plates 120*80*40mmBoth upper and down plates are available to heat up. The screw diameter is 8mm,could be screwed on tightly. Heat plates are made by aluminium,light but heavy duty use heating. Fast heating and time setting available It is the best choice for DIY rosin press. Why it is useful for heavy duty rosin press?Because the plates are made by aluminium,it is 40mm thickness,the normal one is only 15mm.It is compatible for 8000psi or more big pressure machine DIY rosin press kits,include the wires,temperature control box,both heat plates are able to be heating up
The rosin press plates are used for manual ,hydraulic and pneumatic rosin press
40mm thickness 6061Aluminium Four Points to Make Rosin
1.Choose The Starting Plant Material.Better to choose the enough trichomes or crystals material
2. Applying Intense Force.Quick clam fits the need of rosin tek
3. The Right Temperature.Rosin is pressed with temperatures from 170F to 300F, with most target temperatures around 200F. At temperatures above 315F you begin to degrade the psychoactive chemicals
4. Length of Time.Press the plant material and watch the extract seeping out of the plates onto the parchment,the length of the time is very important.
10. Dragway Tools 6-Ton Hydraulic Shop Floor Press with Press Plates and H Frame is Ideal for Gears and Bearings
Feature
Open construction allows work on long pieces.Bolted adjustable cross beams raise and lower for an ideal working distance.
Heavy-duty springs quickly return the ram.
Press plate bar is perfect size for bushings and bearings.
Includes (2) two press plates
Description
Dragway Tools 6 Ton Hydraulic Benchtop Press with Press Plates and H Frame
Dragway Tools six-ton hydraulic benchtop press with press plates. Press should be mounted to a benchtop. This press is ideal for removing and installing bushings, bearings, gears, ball joints, u-joints, pulleys, and gears. Includes (2) two 5-1/4 in. x 2-3/4 in. press plates.
Specifications:
- Open construction allows work on long pieces.
- Bolted, adjustable cross beams raise and lower for an ideal working distance.
- Heavy-duty springs quickly return the ram.
- Constructed with premium 2-1/4-inch tube steel (0.200 thick).
- Press Plate Bar Dimensions: 10 in. x 3/4 in.
- Press plate bar is perfect size for bushings and bearings.
- Includes (2) two press plates.
- Press Plate Dimensions: 5.25 in. x 2.75 in. x .500 in.
- Overall Dimensions: 15-1/4 in. (W) x 19-3/4 in. (D) x 36-1/2 in. (H)
- Capacity: 6 Tons (12,000 lbs.)
- Working Distance Width: 12 in.
- Working Distance Height: 2 in. to 10 in.
- Net Weight: 60 lbs.
- One (1) year warranty against manufacturer defect.
11. Goplus 12 Ton Shop Press Floor H-Frame Press Plates Hydraulic Jack Stand Equipment
Feature
Load capacity: 12 TOverall height: 51"
Weight: 95 lbs
Working distance: 0-19.6"(54cm)
Package include: 1 x hydraulic shop press
Description
Easily install bearings, seals, bushings and pulleys. Straighten axles, shafts and rods with our open front and back frame design. No part is too long to straighten with this press. Our 12 Ton 24000 lb bottle jack is enough force for most jobs and will last a lifetime in the busiest shop.12. Dragway Tools 12 Ton Hydraulic Shop Floor Press with Press Plates and H Frame
Feature
Dragway Tools 12 Ton Hydraulic Shop Floor Press with Press Plates and H FrameFloor Standing Open Front and Rear Design
Spring Loaded Retracting Ram Carriage
3" - 30" Adjustable Press Table
17" Working Width between uprights
Description
Dragway Tools 12 Ton Hydraulic Shop Floor Press with Press Plates and H Frame
Easily install bearings, seals, bushings and pulleys. Straighten axles, shafts and rods with our open front and back frame design. No part is too long to straighten with this press. Our 12 Ton 24000 lb bottle jack is enough force for most jobs and will last a lifetime in the busiest shop.
- 12 Ton Hydraulic Floor Standing Shop Press
- Floor Standing Open Front and Rear Design
- 12 Ton Ram or 24000 LBS
- Spring Loaded Retracting Ram Carriage
- 3 30 Adjustable Press Table
- 17 Working Width between uprights
- (2) 6 x 3.5 x 7/8 Steel Press Plates with triangular recesses
- Measures 53 x 21 x 22 and weights 92 Lbs
13. 20 TON Press Brake "Fully Welded"
Feature
Made in the USADesigned to fit the Harbor Freight 20 ton hydraulic press Item # 32879 & 60603
Press brake kit includes an adjustable back stop and side stop for accurate and repeatable bends.
Description
This SWAG Offroad Press Brake kit comes fully assembled out of the box. Designed to fit the Harbor Freight 20 ton hydraulic press Item # 32879 & 60603. Max Bending Radius (deg.) 110 Max. Bending Capacity 3/8" plate Max Bending Width 19.25" Total width of the brake is 22.125" wide It Is capable of bending mild steel in the following length and thickness. 19" = Full bending width of the bottom die on anything 1/8" or thinner. 15" in 3/16" 12" in 1/4" 5" in 3/8"14. JET HP-35A 35 Ton Hydraulic Press
Feature
HYDRAULIC SHOP PRESSESFor pressing, bending and straightening operations
Easy-to-use, hand-operated with pressure gauge for direct pressure readings
Tables raise and lower easily with use of hand crank on the 15-, 35- and 60-ton models
Side frames are open for inserting long material
Description
OBSOLETE INVENTORY;15. 4x7" Rosin Press Plates (6061 Aluminum) with four heating rod & Double Pid Controller Ship by DHL received in 5 days
Feature
1x 4x7 in Rosin Press Plate ( Top Plate & Bottom Plate)4 heating rod ( 9.5 x 165mm )
1x Double Pid controller & 1pcs Power Cord
8 pcs M8 Screw & 1x M8 wrench
we will provide 1 year warranty to buyer for this item