If you looking for ideal in-sure then you are right place. We are searching for the best ideal in-sure on the market and analyze these products to provide you the best choice.
Reviews
1. Ideal In-Sure 30-1034P 34 Yellow Non-Twist 4 Port Connector for Solid, Stranded, and Tin Bonded Wire (100 Pack)
Feature
WIRE RANGE: Solid: 12 AWG - 20 AWG, Stranded: 12 AWG - 16 AWG (Less than or equal to 19 strands) 18 AWG (7 Strands), Stranded Tin Bonded 14 AWG - 18 AWG (Less than or equal to 19 strands)TEMPERATURE RATING: 105 Degrees Celsius (221 Degrees Fahrenheit). 600 Volts maximum for building wire, 1000 Volts maximum for lighting fixtures
CLEAR SHELL: With this see-through protective coating, you'll be able to visually inspect proper connection in every plug
NO TWIST NECESSARY: Just push the wire into one of the four compartments. This will spare you from unnecessary fatigue on the jobsite
COPPER TO COPPER ONLY: Advised against using with aluminum coating or other materials
Description
As a professional electrician, you're likely to spend a lot of time twisting wires. This can be boring, repetitive, and time consuming. With these In-Sure 4 port connectors, you can be sure of a positive connection without the twisting action. For these connectors, you only need to make sure your wire is stripped to a half inch. After that, push it into the connecting socket, and you're good to go. The plastic coating on the outside lets you look into the unit to ensure a proper connection. From there, you can plug in the connector wherever it needs to go. Whether you're an electrician or working in IT, there are plenty of jobs around where these will serve you well.2. Ideal in-Sure 2-Port x25, 3-Port x25, 4-Port x25, Non-Twist Connector for Solid, Stranded, and Tin Bonded Wire
Feature
Tin bonded stranded wire range: #18 - #14 AWG ( 19 strand)Made in USA
2 Port (25) 3 Port (25) 4 Port (25)
UL 94V-2 flame-retardant shell rated at 221F
CSA certified to C22.2 #188
Description
Overview: The In-Sure Push-In wire connector is perfect for residential, light commercial, lighting retrofit and pre-fab wiring systems. A low insertion force makes them the fastest, easiest, no-twist push-in connector on the market. It's compact size make installation easy and its clear shell gives a visual inspection of the connection.Ideal Industries Series Highlight:
-Color-coded for easy identification
-Tin-plated copper bus system
-Stainless steel inserts restrict pull-out
-Check port for continuity testing
-Visual verification of connection
-Maintenance-free connection
-Made in USA
3. Ideal In-Sure 30-1032P 32 Red Non-Twist 2 Port Connector for Solid, Stranded, and Tin Bonded Wire (100 Pack)
Feature
WIRE RANGE: Solid: 12 AWG - 20 AWG, Stranded: 12 AWG - 16 AWG (Less than or equal to 19 strands) 18 AWG (7 Strands), Stranded Tin Bonded 14 AWG - 18 AWG (Less than or equal to 19 strands)TEMPERATURE RATING: 105 Degrees Celsius (221 Degrees Fahrenheit). 600 Volts maximum for building wire, 1000 Volts maximum for lighting fixtures
CLEAR SHELL: With this see-through protective coating, you'll be able to visually inspect proper connection in every plug
NO TWIST NECESSARY: Just push the wire into one of the four compartments. This will spare you from unnecessary fatigue on the jobsite
COPPER TO COPPER ONLY: Advised against using with aluminum to aluminum or aluminum to copper connections
Description
As a professional electrician, you're likely to spend a lot of time twisting wires. This can be boring, repetitive, and time consuming. With these In-Sure 2 port connectors, you can be sure of a positive connection without the twisting action. For these connectors, you only need to make sure your wire is stripped to a half inch. After that, push it into the connecting socket, and you're good to go. The plastic coating on the outside lets you look into the unit to ensure a proper connection. From there, you can plug in the connector wherever it needs to go. Whether you're an electrician or working in IT, there are plenty of jobs around where these will serve you well.4. IDEAL 30-1033 Push-In Connector, 3-Port, 12-20 AWG, Orange, Box of 100 by Ideal Industries
Feature
WIRE CONNECTORCompact size makes installation easy
Description
IDEAL 30-1033 12AWG PUSH-IN,3-PORT,100 BOX IDEAL INDUSTRIES5. 478047 Wago 773-168 18 to 12 Awg 8 Port Push-in Wire Connector Push-in Wire Connector, 8 Ports, 600v, Conductor Range: 18 to 12 Awg, Color: Dark Grey. Package of 50.
Description
Push-In Wire Connector, 8 Ports, 600V, Conductor Range: 18 to 12 AWG, Color: Dark Grey. Package of 50.6. Ideal in-Sure 2-Port x10, 3-Port x10, 4-Port x10, Non-Twist Connector for Solid, Stranded, and Tin Bonded Wire
Feature
Tin bonded stranded wire range: #18 - #14 AWG ( 19 strand)Made in USA
2 Port (x10) 3 Port (x10) 4 Port (x10)
UL 94V-2 flame-retardant shell rated at 221F
CSA certified to C22.2 #188
Description
Overview: The In-Sure Push-In wire connector is perfect for residential, light commercial, lighting retrofit and pre-fab wiring systems. A low insertion force makes them the fastest, easiest, no-twist push-in connector on the market. It's compact size make installation easy and its clear shell gives a visual inspection of the connection.Ideal Industries Series Highlight:
-Color-coded for easy identification
-Tin-plated copper bus system
-Stainless steel inserts restrict pull-out
-Check port for continuity testing
-Visual verification of connection
-Maintenance-free connection
-Made in USA
7. Gardner Bender 10-PC2 PushGard 2-Port Push-In Electrical Wire Connectors, 22-12 AWG Solid, 100 pk, Red
Feature
2-PORT CONFIGURATION: Fits: 22-12 AWG Wire GaugeSIMPLIFIED DESIGN: Easy insertion and compact size helps in tight locations
EASY IDENTIFICATION AND VERIFICATION: Clear polycarbonate housing have color-coded side panels for connection verification and identification
CORROSION-RESISTANT STAINLESS STEEL SPRINGS, resist wire pullout while keeping CORRECTIONS POSSIBLE with a left-right twist and pull
EASY TO USE: Continuity test point for easy voltage checks
UL LISTED: Canadian and U.S. requirements (connections rated at 600V Max for building wiring and rated at 1000V Max in lighting fixtures/luminaries and signs)
COPPER TO COPPER connections only
Description
PushGard-Push-in Wire Connectors. Easy and fast to use, just strip and push conductors into PushGard connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification.8. HIFROM Push-in Wire Connector 2 Port/ 4 Port/ 6 Port and 8 Port Combination Set for Junction Boxes Wire Wall-Nut Assortment Pack (Set of 300pcs)
Feature
1. Terminates 18-14 AWG, included type 2 4 6 8 Port Push-in Wire Connector, is widely used in different demand.2. Push Wire Connector Connect copper wires faster and more reliably, easy to use, save your time.
3. Save up to 50% in wiring time over twist-type
4. Current rating 20A max. 600V building wire/1000V fixtures and signs
5. 100pcs 2 conductor, 100pcs 4 conductor, 50pcs 6 conductor, 50pcs 8 conductor
Description
This Connector is rated for 400V at 24A and can be used with 18-14 AWG solid or stranded. Simple flexible and compact conductor terminal block, for use with solid, stranding and flexible cables. Easy, fast push wire installation, that requires no tools and can be fitted in seconds to stripped cables. Ideal for use on mains voltage ring-main and cooker installations, HVAC control circuits or as an alternative to the conventional junction box.
Installation notes: Connectors should be installed inside a suitable enclosure, but maybe installed inside cavity's when installing back-less equipment such as domestic lighting. There is no requirement to secure the connectors providing the cables are secured with clips or glands outside the enclosure. As with all connectors these can be reused time after time with no loss of connectivity or capacity.
Package Included:
- 100pcs x 2 Hole Connector
- 100pcs x 4 Hole Connector
- 50pcs x 6 Hole Connector
- 50pcs x 8 Hole Connector
9. Wago Wire Connector 600 V Clear 4 Conductor 100 / Box
Feature
12-18 AWG solid copper wireCurrent rating 20A max. 600V building wire/1000V fixtures and signs
105 deg. C rated (221 deg. F)
For fast, easy install
There are 100 connectors in the box
Description
Wire connectors hold 4-conductor wires securely in non-grounded j-box installations. Wire nuts come in handy for J-box installations, but wires can pull out accidentally, leaving you without a secure connection. Guarantee perfect four-wire non-grounding installations every time with this 100-pack of 4-Conductor Wall Nuts. Safe for use with 18- to 12-gauge solid wire or 16- to 12-gauge stranded wire, these wire connectors will hold wires securely so they can't pull out accidentally. A transparent housing provides easy inspection. Installation is simple. Strip 7/16" to 1/2" and insert into a wire connector. To remove solid wire, just pull and twist. If the wire is stranded, cut the wire, discard the connector and restrip the wire to insert it into a new connector.10. Wago Wire Connector 600 V Clear 6 Conductor 50 / Box
Feature
Wire connectors hold wires fast, can't pull out accidentallyTransparent housing for easy inspection
