Finding your suitable nema 23 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best nema 23 including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. 3PCS Nema 23 CNC Stepper Motor 2.8A 269oz.in 76mm Bipolar for Hobby CNC Kit
Feature
Package in 3PCS1.9Nm(269oz.in) holding torque
NEMA 23 bipolar 2.24"x2.24"x3.0" 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 2.8A & resistance 1.13ohms
Description
This bipolar Nema 23 stepper motor is most popular, it with 1.8 deg. step angle (200 steps/revolution).Each phase draws 2.8A, allowing for a holding torque of 1.9Nm(269oz.in).
Electrical Specification:
* Manufacturer Part Number: 23HS30-2804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 1.9Nm(269oz.in)
* Rated Current/phase: 2.8A
* Phase Resistance: 1.13ohms
* Inductance: 5.4mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 57 x 57mm
* Body Length: 76mm
* Shaft Diameter: 6.35mm
* Shaft Length: 21mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 1.2kg
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
2. High Torque Nema 23 CNC Stepper Motor 114mm 425oz.in/3Nm CNC Mill Lathe Router
Feature
Very Huge Torque3Nm(425oz.in) holding torque
NEMA 23 bipolar 2.24"x2.24"x4.45" 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 4.2A & resistance 0.9ohms
Description
This is the strongest model for Nema 23 stepper motor, it with 1.8 deg. step angle (200 steps/revolution).Each phase draws 4.2A, allowing for a holding torque of 3.0Nm(425oz.in).
Electrical Specification:
* Manufacturer Part Number: 23HS45-4204S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 3.0Nm(425oz.in)
* Rated Current/phase: 4.2A
* Phase Resistance: 0.9ohms
* Inductance: 3.8mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 57 x 57mm
* Body Length: 113mm
* Shaft Diameter: 10mm
* Shaft Length: 24mm
* D-cut Length: 20mm
* Number of Leads: 4
* Lead Length: 400mm
* Weight: 1.8kg
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
3. CNC Stepper Motor Nema 23 Bipolar 2.8A 269oz.in/1.9Nm CNC Mill Lathe Router
Feature
1.9Nm(269oz.in) holding torqueSingle Shaft 6.35mm diameter
NEMA 23 bipolar 2.24"x2.24"x3.0" 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 2.8A & resistance 1.13ohms
Description
This bipolar Nema 23 stepper motor is most popular, it with 1.8 deg. step angle (200 steps/revolution).Each phase draws 2.8A, allowing for a holding torque of 1.9Nm(269oz.in).
Electrical Specification:
* Manufacturer Part Number: 23HS30-2804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 1.9Nm(269oz.in)
* Rated Current/phase: 2.8A
* Phase Resistance: 1.13ohms
* Inductance: 5.4mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 57 x 57mm
* Body Length: 76mm
* Shaft Diameter: 6.35mm
* Shaft Length: 21mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 1.2kg
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
4. 3PCS Nema 23 CNC Stepper Motor 2.8A 179oz.in 56mm Bipolar for Hobby CNC Kit
Feature
Package in 3PCS1.26Nm(178.5oz.in) holding torque
NEMA 23 bipolar 2.24"x2.24"x2.2" 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 2.8A & resistance 0.9ohms
Description
This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution).Each phase draws 2.8A, allowing for a holding torque of 1.26Nm(178.5oz.in).
Electrical Specification:
* Manufacturer Part Number: 23HS22-2804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 1.26Nm(178.5oz.in)
* Rated Current/phase: 2.8A
* Phase Resistance: 0.9ohms
* Inductance: 2.5mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 57 x 57mm
* Body Length: 56mm
* Shaft Diameter: 6.35mm
* Shaft Length: 20.6mm
* Number of Leads: 4
* Lead Length: 300mm
* Weight: 700g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
5. Nema 23 Stepper Motor 2.8A 1.9Nm (269oz.in) 76mm Length for CNC Mill Lathe Router
Feature
Nema 23 76mm length bipolar stepper motor.1.9Nm (269oz.in) torque.
Ideal for CNC Mill Lathe Router
Description
Specifications:
- Manufacturer Part Number: HS30-2804S 57x76
- Step Angle: 1.8
- Step Accuracy: 5%
- Holding Torque: 1.9Nm (269oz.in)
- Rated Current/phase: 2.8A
- Phase Resistance: 1.13ohms
- Voltage: 3.2V
- Inductance: 5.4mH20%(1KHz)
- Weight: 1.1kg
6. Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length for CNC Mill Lathe Router
Feature
Nema 23 100mm length stepper motor.3.0Nm (425oz.in) torque.
The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router.
Description
This is the most powerful Nema 23 stepper motor available. With 1.8 deg step angle (200 steps/revolution). Each phase draws 4.2A, allowing for a holding torque of 3.0Nm (425oz.in).
Specifications:
- Manufacturer Part Number: 23HS45-4204S 57x100
- Step Angle: 1.8
- Holding Torque: 3.0Nm(425oz.in)
- Rated Current/phase: 4.2A
- Phase Resistance: 0.9ohms
- Recommended Voltage: 24-48V
- Inductance: 3.8mH20%(1KHz)
- Weight: 1.8kg
- Lead Length: 30cm
7. Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill
Feature
Higher Torque1.26Nm(178.5oz.in) holding torque
NEMA 23 bipolar 2.24"x2.24"x2.2" 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 2.8A & resistance 0.9ohms
Description
This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution).Each phase draws 2.8A, allowing for a holding torque of 1.26Nm(178.5oz.in).
Electrical Specification:
* Manufacturer Part Number: 23HS22-2804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 1.26Nm(178.5oz.in)
* Rated Current/phase: 2.8A
* Phase Resistance: 0.9ohms
* Inductance: 2.5mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 57 x 57mm
* Body Length: 56mm
* Shaft Diameter: 6.35mm
* Shaft Length: 20.6mm
* Number of Leads: 4
* Lead Length: 300mm
* Weight: 700g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
8. 3PCS 3Nm Nema 23 Stepper Motor 4.2A 4-wires 10mm Shaft DIY CNC Mill Lathe Router
Feature
Package in 3PCS3Nm(425oz.in) holding torque
NEMA 23 bipolar 2.24"x2.24"x4.45" 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 4.2A & resistance 0.9ohms
Description
This is the strongest model for Nema 23 stepper motor, it with 1.8 deg. step angle (200 steps/revolution).Each phase draws 4.2A, allowing for a holding torque of 3.0Nm(425oz.in).
Electrical Specification:
* Manufacturer Part Number: 23HS45-4204S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 3.0Nm(425oz.in)
* Rated Current/phase: 4.2A
* Phase Resistance: 0.9ohms
* Inductance: 3.8mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 57 x 57mm
* Body Length: 113mm
* Shaft Diameter: 10mm
* Shaft Length: 24mm
* D-cut Length: 20mm
* Number of Leads: 4
* Lead Length: 400mm
* Weight: 1.8kg
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
9. Longruner For Arduino Professional 3D printer CNC Kit, GRBL CNC Shield +UNO R3 Board+RAMPS 1.4 Mechanical Switch Endstop+DRV8825 A4988 GRBL Stepper Motor Driver+Nema 17 Stepper Motor (LKB02)
Feature
Latest CH340G CNC Shield expansion board Version 3.0 for Arduino.Longruner UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable.
4pcs DRV8825 Stepper Motor Driver with Heat Sinks.
3pcs NEMA-17 Stepper Motor 84 oz.in (59 Ncm) 47mm Body 1.8 degree with Mounting Bracket Kit DIY 3D Printer CNC Robot with 3pcs Mounting Bracket and 12pcs M3 Screws.
3pcs Endstop Mechanical Limit Switches for 3D printer RAMPS 1.4 with 3Pin 70cm Cable.
Description
CNC Shield Board: Latest CNC Shield Version 3.0 for arduino. GRBL 0.9 compatible. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13). 2 x End stops for each axis (6 in total). Coolant enable. Compatible with A4988 or DRV8825 stepper driver. Runs on 12-36V DC. DRV8825 Stepper Motor Driver: Stepper motor driver (upgraded from A4988, 2.5 A max current/phase. It's not arduino official board but it's compatible with all arduino software and hardware). Nema 17 Stepper motor Specification: Model No.:17HD48002H-22B Step Angle: 1.8 deg Holding Torque: 59Ncm(84 oz.in) Rated Current/phase: 1.7A Frame Size: 41 x 41mm Body Length: 47mm Shaft Diameter: 5mm Shaft Length: 22mm Weight: 380g Mechanical Endstop Connection Description: Red line connect VCC (ramps of +) black wire connect the GND (ramps of -) Green Line connect SIGNAL (ramps in s) Tips: Under normal circumstances, the system must be configured to at least three mechanical switches. Advantage: Easy to install, the more common used styles. Length of Cable: 70 cm Great Package Includes: 1 x CNC Shield Board 1 x Longruner UNO R3 Board 1 x 1.5m USB cable for R3 Board 3 x Nema 17 stepper motor 1.7 A (with bracket and screw) 3 x Nema 17 Stepper Motor Mounting Bracket 3 x Mechanical Switch Endstop 3 x 3Pin 70cm Cable 4 x DRV8825 Stepper Motor Driver 4 x Aluminum heatsink w/ 3M tape backing 12x M3 Screws for bracket of stepper motorIf you have any question, please be free to contact us, we will try our best to help you. Service Email: [email protected]10. Low Current Nema 23 CNC Stepper Motor 1.8A 340oz.in/2.4Nm CNC Mill Lathe Router
Feature
Small Current High Torque2.4Nm(340oz.in) holding torque
NEMA 23 bipolar 2.24"x2.24"x4.1" 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 1.8A & resistance 2.75ohms
Description
This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution).Each phase draws 1.8A, allowing for a holding torque of 2.4Nm(340oz.in).
Electrical Specification:
* Manufacturer Part Number: 23HS41-1804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 2.4Nm(340oz.in)
* Rated Current/phase: 1.8A
* Phase Resistance: 2.75ohms
* Inductance: 17mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 57 x 57mm
* Body Length: 104mm
* Shaft Diameter: 8mm
* Shaft Length: 20.6mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 1.5kg
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
