Finding your suitable pixhawk led is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best pixhawk led including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Readytosky Pixhawk PX4 RGB LED Board External LED USB Extension Module for Pixhawk Flight Controller RC Drone Quadcopter
Feature
RGB External LED Indicator USB Module for Pixhawk Flight Controller.Includes external RGB-LED and USB receptacle to connect to Pixhawk.
Extending the USB port, easy to connect to the external USB cable, free from the installation restrictions for flight control.
When RGB indicator light connecting to the module, the built-in RGB of flight control will automatically go off.
Original 1.25 connector and original USB socket, to ensure the best contact stability.
Description
Pixhawk powerful self-evident, it is highly integrated multifunction indicator brightness RGB full color for easy identification flight control state, compared to the previous APM is more intuitive, is great design. But the problem here: the Fengyun RGB LED facing up, can only be viewed on the ground, unable to identify the state of the air flight control. The other is surrounded by some of the rack is full design, such as SKY-HERO, flight control can be hidden in the middle of two center panels, while well-protected, users can easily connect the USB cable. So we refer to the official accessories design, launched this combo Pixhawk-RGB module functions.Pixhawk-RGB module has the following characteristics:
The RGB LEDs to display extended to the exterior, when connected to the module, built-in RGB flight control automatically turns off;
Extension of USB ports, convenient USB cable from the external links, without limitation flight control installation location;
Pixhawk onboard with identical LED RGB controller and Osram's high-brightness LED;
Molex connector and the original 1.25 HRS original USB socket to ensure optimum contact stability.
Pixhawk-RGB module and Pixhawk like flight control connection (please note that this price includes only Pixhawk-RGB and cable):
Instructions for use:
The Interface I2C flag 4P cable plugs connected Pixhawk part of the flight control I2C port, if I2C port is occupied, please use the I2C breakout board; another part of USB plug connected to the USB port of the flight control, you can complete the connection; when used, the onboard flight control RGB light will automatically turn off, unplug the plug is for the use of the onboard I2C RGB again. Size / weight:
18 18 5mm/4g (with cable)
Package includes:
1 Pixhawk-RGB module ;
1 Cable 200mm.
2. BGNing PIXHAWK PX4 LED Module RGB LED & USB Extension withProtective Case Full Color I2C LED Module
Feature
I2C LED Module For Pixhawk PX4 With USB Extension Function External Indicators Full Color LED, With ShellTo Extend To The Exterior RGB Leds To Display, When Connected To The Module, Built-In RGB Flight Control Automatically Turns Off
Increase The USB Port For Easy Links From External USB Cable, Without Limitation Flight Control Installation Location
And Pixhawk Onboard Identical Toshiba LED Controller And Osram's High-Brightness RGB LED
Reminder: APM Can Also Use This Module, But You Can Not Use a USB Extension Function - Only Recommended Pixhawk Users To Choose.
Description
Description :I2C LED Module For Pixhawk PX4 With USB Extension Function External Indicators Full Color LED, With Shell
Pixhawk Powerful Self-Evident, Its High Integrated Multifunction Lamp Brightness RGB Full Color, Easy To Identify The Status Of The Flight Control, Compared To The Previous APM Is More Intuitive, Is a Great Design. But The Problem Is Pixhawk Fengyun LED Upward, Can Only Be Viewed On The Ground, In The Air, Unable To Recognize The Status Of The Flight Control, The Other Is Surrounded By Many Racks Are Full Design, Flight Control, While Being Well-Protected User Can Not Easily Connect USB Line. So We Refer To The Official Parts Design And Launch Of This Combo Pixhawk-RGB Module Functions.
Pixhawk-RGB Module Has The Following Characteristics:
To Extend To The Exterior RGB Leds To Display, When Connected To The Module, Built-In RGB Flight Control Automatically Turns Off;
Increase The USB Port For Easy Links From External USB Cable, Without Limitation Flight Control Installation Location;
And Pixhawk Onboard Identical Toshiba LED Controller And Osram's High-Brightness RGB LED
Instructions For Use:
The Interface Flags 4P Cable Plug Connected Pixhawk I2C Part Of The Flight Control I2C Port, If The I2C Port Is Occupied, Please Use I2C Breakout Board; Another Part Of USB Plug Connected To The Flight Control Of The USB Port, You Can Complete The Connection; Use, On-Board Flight Control RGB Light Will Automatically Turn Off, Unplug The Plug Is For The Use Of The Onboard I2C RGB Again.
Reminder: APM Can Also Use This Module, But You Can Not Use a USB Extension Function - Only Recommended Pixhawk Users To Choose.
Package Includes:
1x Pixhawk PX4 RGB External LED & USB Extension Module With Protective Case
3. Pixhawk Integrated Plate LED Buzzer With USB I2c and Safety Switch
4. New PPM Encoder Module LED Indicator Module I2C Splitter Expand Module for Pixhawk By Letbo
Feature
100% brand newDescription
Specification:
Model: 593730
Product Description
Material: Plastic
Size
I2C splitter: 4x2x1cm
PPM Encoder: 3x2x1cm
Support input channel: 8
Features:
* RGB indicator extend to copter outside display
* Superb technology
Application: For Pixhawk
Package Include:
1x PPM encoder
1x LED indicator module
1x I2C beam splitter extension module
5. XSD MOEDL CRIUS RGB External LED Indicator USB Module for Pixhawk Flight Controller
Feature
includes external RGB-LED and USB receptacle to connect to Pixhawk.Use the provided cables and connect to the I2C splitter module to set up a bright, multicolor LED and convenient USB port for your vehicle.
Description
This kit includes external RGB-LED and USB receptacle to connect to Pixhawk.Use the provided cables and connect to the I2C splitter module to set up a bright, multicolor LED and convenient USB port for your vehicle.
Dimension(mm): 18 x 19 x 5
Weight(g): 5.4(include wire)
Package content
Pixhawk-RGB module x 1
8P to two 4P cable 200mm x1
6. USAQ Mini PIX F4 Flight Controller M8N GPS Voltage Module 915mHz Telemetry Buzzer LED
Feature
Mini full function PixHawk platformMini F4 flight controller with plug-and-play harnesses (minus telemetry)
Includes FC, M8N GPS, LED/buzzer module, voltage module, telemetry modules
Description
RadioLink combines the highest quality with an affordable price with their new range of mini flight controllers. The mini PIX features an STM32F405 F4 32-bit flight controller processor, LPS22HB barometer, QMC5883L compass, and MPU6500 accelerometer from INVENSENS. These components are the best option for a top configuration at an affordable price.Small as a standard racing drone flight controller, the Mini PIX is compatible with all PixHawk components. Each kit includes the Mini PIX flight controller, gps/compass module, voltage module/power distribution board, led/buzzer module, telemetry air module and telemetry ground module.
PIX F4 Flight Controller:
Processor: STM32F405VGT6
Gyro: MPU6500
Barometer: LPS22HB
Compass: QMC5883L
Connector: JST GH connector
Mavlink UART: 2(with CTSRTS)
Size: 39*39*12mm
Weight: 12g (without wires)
Better altitude hold
Top configuration
Vibration damping by software
Easy to control
Comprehensive technical support
RadioLink 500mW 915mHz Telemetry Module:
Antenna Connector: RP-SMA
Power: 500mW
Sensitivity: -117 dBm
Interface: UART
Weight: 63g (total)
Air Module Dimensions: 51x30x10mm (12g)
Ground Module Dimensions: 70x25x12mm (15g)
Ports:
A. GPS UART interface baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K
B. Geomagnetic I2C interface
Package included:
1 x Mini PIX F4 Flight Controlller
1 x TS100 Mini M8N GPS with Cable
1 x 915mHz Telemetry Air Module with Cable
1 x Telemetry Ground Module with Cable
1 x Power Module Power Distribution board with Cable
1 x Buzzer and LED Module with Cable
7. nidici BN-280 GPS Module U-blox U8 UART TTL Level Dual Glonass GPS with Flash for Arduino Pixhawk Aircraft Flight Control FPV Freestyle Drone Quadcopter
Feature
This BN-280 GPS Module can show your speed.With u-M8030-KT chip, 72 searching channel support rate and 4800bps to 921600bps baud rate.
It has several receiver mode,such as GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS.
Output Level is TTL or RS-232, TTL by default. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
The TX LED flash means GPS module output normally.The PPS LED flash means gps module locate your place.
Description
Specification:Physical parameters
Dimension :28mm*28mm*10mm
Weight : 11.8g
Connector : 1.25 spacing 6pin
Chip Characteristics
Chip u-blox U8
Receiver modeGPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
FrequencyGPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
72 search channel
Sensitivity
Tracking : -167dBm
Recapture : -160dBm
Cold start : -148dBm
Hot start : -156dBm
Accuracy
Horizontal accuracy2.0mCEP 2D RMS SBAS Assistance(open sky)
Speed accuracy :0.1m/s 95%SA off
Time accuracy 1us
Start Time
Cold Start : 26s
Warm start : 25s
Hot start : 1s
Output Data
Baud rate : 4800bps to 921600bps,Default 9600bps
Output Level : TTL or RS-232,Default TTL level
Output agreement : NMEA-0183 or UBX, Default NMEA-0183
Single GNSS : 1Hz-18Hz
Standard GNSS : 1Hz-10Hz,Default 1Hz
Working Limitation
Height: 50,000m Max
Speed: 515m/s Max
Gravitational acceleration4g max
Power consumption
VCC : DC Voltage 3.0V-5.5V,Typical: 5.0V
Current : Capture 70mA/5.0V
Operating temp :-40 C ~ +85C
Storage Temp : -40C ~ +105C
Indicator
TX LED: The data output, TX LED flashing
PPS LED: PPS LED not bright when GPS not fixed,flashing when fixed
Module Pin description
1. PPS,Sec pulse will output after positioning, pulse period is 1s, high level persists 100 ms, used for system synchronization
2. GND ,connect to the ground
3. TX data output of module
4. RX data input of module
5. VCC, 3.0V-5.5V,recommend 5.0V
6. BOOT
Package Includes:
1 X BN-280 GPS module
1 X Cable
8. LPZ Pixhawk PX4 2.4.6 32bit Flight Controller Led NEO-M8N GPS Power Module PM PPM OSD 3DR 915Mhz / 433Mhz As DJI F450 Drone
Feature
Pixhawk PX4 2.4.6 32bit Flight ControllerDescription
Package List:- Pixhawk px4 2.4.6 32 bit ARM Flight Controller X 1pcs
- Original shell X 1pcs
- Buzzer X 1pcs
- Safety button X 1pcs
- Ublox NEO-M8N GPS Module X 1pcs
- Power Module(PM) X 1pcs
- GPS Folding Holder X 1pcs
- Pixhawk-I2C Splitter Expand Module X 1pcs
- External LED light board(with USB function) X 1pcs
- 433Mhz Data Transmission Module(DTM) X 1 pcs
- PPM module X 1pcs
- Shock Absorber X 1pcs
- USB Data Cable X 1pcs
- Mini OSD for Pixhawk X 1pcs
9. ShareGoo Pixhawk-I2C Splitter Expand Module for Pixhawk APM Flight Controller(Pack of 2)
Feature
Package includes 2 PCS I2C SplitterIdeal for Pixhawk APM Flight Controller,Pixhawk / APM flight control only one I2C interface, the situation to connect over multiple I2C peripherals, you can use this breakout board
Expands the I2C port to allow up to four additional peripherals to connect to Pixhawk. Use the 4-wire cable to connect the I2C splitter and add a compass module, external LED, digital airspeed sensor, or other peripherals to your vehicle.
Pixhawk-I2C module with 4pin cable
Description
The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.Use the 4-wire cable to connect the I2C splitter and add a compass module, external LED, digital airspeed sensor, or other peripherals to your vehicle.
Package content
Pixhawk-I2C module x 2
4P cable 60mm x2
10. Hobbypower Pixhawk PX4 Flight Controller Shock Absorber + NEO-7M GPS 915Mhz Radio Wireless Telemetry OSD Module PPM Module RGB LED I2C Splitter Expand Power Module
Feature
Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating systemBus interface (UART, I2C, SPI, CAN)
Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control
Provide redundant power input and fault transfer function
Provide automatic and manual mode
Description
Pixhawk V2.4.8 32Bit Flight Controller- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;
- 14* PWM/ actuator output;
- Bus interface (UART, I2C, SPI, CAN);
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
- Provide automatic and manual mode;
- Provide redundant power input and fault transfer function;
- Color LED lamp;
- Multi tone buzzer interface;
- Micro SD to record flight data;
Processor:
- 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit
- Main frequency: 256K, 168MHZ RAM
- 32 bit STM32F103 backup co processor
Sensor:
- L3GD20 3 axis digital 16 bit gyroscope
- LSM303D 3 axis 14 bit accelerometer /magnetometer
- MPU6000 6 axis accelerometer / magnetometer
- MS5611 high precision barometer
Interface:
- 5* UART, 1*compatible high voltage, 2*hardware flow control
- 2*CAN
- Spektrum DSM/DSM2/DSM-X satellite receiver compatible input
- Futaba SBUS compatible input and output
- PPM signal input
- RSSI (PWM or voltage) input
- I2C
- SPI
- 3.3 and 6.6VADC input
- External USB MICRO interface
Package includes:
1x Pixhawk V2.4.8 Flight Controller(comes with Buzzer,Switch,1G SD Card)
1x NEO-7M GPS module
1x Power module
1x OSD Module
1x 3DR 915Mhz Radio Wireless Telemetry set
1x PPM Module
1x I2C Splitter Expand Module
1x GPS bracket
1x Shock Absorber
