Finding your suitable remote relay 12v dc is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best remote relay 12v dc including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. INSMA 433Mhz Wireless RF Switch Long Range DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter & 1 Receiver)
Feature
Long Range Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is up to 98ft/30m with no obstacle.4CH for More ControlAdjustable working way, control equipment turn/reverse, on/off. Switch Self-lock, Jog, Inter-lock.
Security ControlLearning code has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
Easy to UseExtremely easy to setup, learn, relearn and control(please refer to introduction). Stable and reliable performance, high receive sensitivity.
Wide ApplicationWIDE range of APPLICATIONS from simple domestic remote control to autonomous control such as, window, entrance, Garage Doors, alarm system, lifting equipment and so on. NOTE: Please email us if you meet any problem, we are always here to help, thanks!
Description
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.Output working way:
1. Self-lock: connect the JP1 with the cutting out cap.
2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock: Connect the Jp2 with the Cutting out cap.
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Using Instructions:
1. Press the learning code, the indicator flash, loosen finger, press any button of the remote control, the indicator flash 2 times and off, it means learning successfully.
2. It can learn various chips with the different code wireless remote control.
3. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means that it has been removed.
Receiver:
Size: 7.2 x 5.2 x 2.6cm
1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40 Degree +80 Degree
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: DC and AC is optional
7. Output current: Less than 3A
8. Max load current: 10A
Remote control transmitter:
Size: 5.8 x 3.9 x 1.4cm
1. Remote Distance: 328ft/100M
2. Operating Voltage: DC 12V
3. Frequency: 433mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code
Package Included:
2 x Transmitters
1 x Receiver
1 x Manual
2. Yasorn Relay Switch DC 12V Wireless RF Remote Control Switch 433Mhz One 1-Channel with Two Transmitters
Feature
REMOTE CONTROL--EASY to SETUP and USE. Stable and reliable performance, high receive sensitivityEXCELLENT STABILLITY--The relay module provides high signal sensitivity at lower cost and resist interference
STRONG SIGNAL--Can pass through walls, floors and doors, control receiver from any place within a reliable distance
MORE FLEXIBILITY--It adopts non-directional wireless encoding technology, allowing independent control without mutual interference, can be flexibly configured in quantity and in operating modes
WIDELY APPLICATION--Be used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc
Description
How this remote control switch type works:After finishing wiring, press the button XX, the relevant load will on, press this button again, the load will off (Factory default working mode--Latched)
Specifications:
Transmitter:
1: Operating Voltage: DC 6V
2: Operating Frequency: 433Mhz
3: Vibration Resistance: 4.7M
4: Chip Type: PT2260
5: Modulation: ASK (Stable, less interference)
6: Encode Type: Group Coding
7: Battery Type: 2pcs CR2016 3V
8: Remote Distance: 30-50m (Theoretical value)
9: Ambient Temperature: -30 -70 , Humidity<95%
10: Product Dimension: 135x42x25mm
Receiver:
1: Input voltage: DC 12V
2: Channel: 1 channel
3: Operational frequency: 433Mhz
4: Encoding mode: intelligent-learning code
5: Output type: Passive output
6: Max load: 10A
7: Sensitivity: 105DB
8: Temperature: -30 C -70 C; RH: <95%
9: Dimensions: 65x37x22mm
You will get:
2 x transmitter
1 x 1-channel relay
1 x English Manual
3. eMylo DC 12V 15x 1CH 433Mhz Wireless RF Relay Remote Control Light Switch 2pcs Transmitter with Receiver
Feature
The product adopts RF technology, with long remote control distance and stable signal.The receiving module provides high signal sensitivity at lower cost and resist interference for excellent stability.
It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
The programmable transmitter and receivers can be flexibly configured in quantity and in operating modes.
It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
Description
TransmitterOperating Voltage: 12V
Operating Frequency: 433Mhz
Vibration Resistance: 4.7M
Chip Type: 2264
Modulation: ASK (Stable, less interference)
Encode Type: Welding code
Battery Type: 12V 23A(not included)
Remote Distance: 150m (Theoretical value)
Ambient TEMP: -30 -70, Humidity<95%
Product DIM: 115x50x15mm
Receiver
Input Voltage: DC 12V
Operating Frequency: 433Mhz
Coding Way: Intelligent Learning
Output Type: Active output
Max load: 10A
Ambient TEMP: -30 -70, Humidity<95%
Factory Default: Self-locking
Board DIM: 45x30.5x17mm
Case DIM: 65x37x22mm
Package Includes:
2x Transmitter (Battery is not included)
15x Receivers
1x English Manual
Notice:
All remote control switch kits support 433mhz frequency, and no interference each other, if you buy many kit and hope for interference, please contact us when you place order.
4. eMylo DC 12V 2CH 433Mhz RF Wireless Relay Remote Control Light Momentary Switch Transmitter with Receiver
Feature
The product adopts RF technology, with long remote control distance and stable signal.The integrated module features stable performance, making the product easy to use,strongly reliable and enduring.
It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
The programmable transmitter and receivers can be flexibly configured in quantity and in operating modes.
It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
Description
ReceiverInput Voltage: DC 12V
Operating Frequency: 433Mhz
Operation Way: Inching, Self-locking, Interlocked
Coding Way: Intelligent Learning
Output Type: Passive Output
Max load: 10A
Ambient TEMP: -20 -65, Humidity<95%
Factory Default: Self-locking
Board DIM: 69x49x17mm
Case DIM: 75x65x29mm
Transmitter
Operating Voltage: DC 12V
Operating Frequency: 433Mhz
Vibration Resistance: 126
Chip Type: 2260
Modulation: ASK (Stable, less interference)
Encode Type: Welding code
Battery Type: 12V 27A(not included)
Remote Distance: 20m (Theoretical value)
Ambient TEMP: -30 -70 , Humidity<95%
Product DIM: 50x39x12mm
Package Includes:
2X Transmitters (Battery is not included)
1X Receiver
1 x English manual
5. ELENKER DC 12V 10A Relay 1CH Wireless RF Remote Control Switch Transmitter with Receiver
Feature
Upgrade new high-speed diode, Soundwave resonator(SAW)to keep stabilizing frequency. This product is already matched, just simply connect the line and get it to work right away.Wireless coding technology, no direction, switch without disturbing each other, you can turn on or turn off the receiver with transmitter(remote control)from any place within a reliable distance.
The strong signal can pass through walls,floors and doors,control receiver from any place within a reliable distance.
The receiver controller receives and stores the signal from remote control,dispensing with traditional jumpers or switches coding with its high confidentiality,large storage,stable performance.
Applications: Widely used in various anti-theft alarms, security systems, remote-controlled devices,motor-driven curtain, roller blind door, garage/gate barriers, motorcycles, short-range and long-range wireless remote control products, industrial control products.
Description
ELENKER 1CH wireless RF Remote Control Switch Transmitter with ReceiverReceiving Board parameters
Operating Voltage: DC 12V
Operating Frequency: 315 MHz
Receiver Sensitivity: >-105dB
Maximum Load: 7A 240V AC / 10A 24V DC
Encoding Type: Learning Code
Board Size: 34 x 31 x 18mm
Weight: About 30g
Remote Control Parameters
Operating voltage: 12V (12V 23A Battery)
Frequency: 315MHZ
Encoding Type: Fixed Code
Firing Range: 100 meter(open) in theory, 15%-30% in reality
Size: 35x 55x 13mm
Shock Resistance: 4.7M
Battery for Transmitter :23A 12V
Weight: About 24g
Note:
This ELENKER Remote Control Switch has been set up before leaving the factory, and the pairing has been completed, no need to pair again.
Please connect the wiring according to the wiring diagram.
Turn on the power, if the power led is not lit, the line is not connected,please check the line first.
If the wiring is correct and the power led is lit but cannot work, please clear the code first and then learn the new code.
Clearing Code Method:
--- Turn on the power, power led lit, learning led will light for 3 seconds and then go out.
--- Press and hold the learning key.
--- The learning led will turn off after 8 seconds.
--- Complete clearing code.
Learning Code Method:
--- Turn on the power, power led lit, learning led will light for 3 seconds and then go out.
--- Press the learning key once.
--- At this time, the learning led lights up.
--- Press the remote control button, the learning led will light off
--- Complete learning code.
Package Included:
1 x ELENKER Remote Control Switch Transmitter
6. 433Mhz Universal Wireless Remote Control Switch DC 12V 1CH relay Receiver Module RF Transmitter 433 Mhz Remote Controls (Transmitters 2 button+ 2 Receiver 1CH)
Feature
433 Mhz Universal Wireless Remote: Input Voltage 12 V, Working Mode of Wireless 433mhz rf module receiver and transmitter RF are Superheterodyne .RF Switch DC: Transmitting distance: > 100 m ( open space), Only Support remote type: EV1527 learning code.
Wireless Relay 12v :Dimension of PCB:35 x 30 x 18 mm (L,W,H) ,Output terminal: NO , NC , COM.
It supports remotely and wirelessly control your Garage Door, Electronic Gates, Electrical Appliances and other telecommand equipments ,Electrical Appliances, Motorcycle Alarm, Car Sunroofs, Heating Systems, etc. Bringing you brand new experience of remote control, Please don't miss it.
Professional customer service ,Our on-line customer service and technical support ensure quick answers to your questions via email
Description
DescriptionTransmitting distance: > 100 m ( open space)
Decoding mode: MCU software decoding
Remote storage: 20
Support remote type: EV1527 learning code
Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )
Output terminal: NO , NC , COM
Dimension of PCB: 35 x 30 x 18 mm (L,W,H)
Remote control battery: 2 x 3 V CR2016 button batteries
Note: Maximum input power is 250 V
Working mode
Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay modePush the remote control button , the relay connects , from when release the remote button ,
After 5s or 10s or 15s , the relay disconnect automatically .
NoteInstructions for use attached to the picture
Package includes
1 x Remotes + 2 x Receiver
7. O'plaza Dc 12V 10A Relay RF Wireless Remote Control Receiver Momentary Switch (12V 1 Channel)
Feature
100% Brand New Control Switch SystemConnection as picture
Firing Range: 100 meter, Operating Frequency: 315MHz
Receiver Sensitivity: >-105dB
Maximum Load: 10A 250V AC /10 A 30V DC
Description
Features :100% Brand New
Remote Control:
Working Volt: DC12V
Frequency: 315MHz
Encoding Type: Fixed code
Shock resistance : 4.7M
Size: 35x x 55mm x 13mm
Firing Range: 100 meter
Control Switch System:
Operating Voltage: DC12V
Operating Frequency: 315MHz
Receiver Sensitivity: >-105dB
Maximum Load: 10A 250V AC /10 A 30V DC
Size: 34 x 31 x 18mm
Encoding Type: learning code
working: self-locking
Package
1X Dc 12v relay 1ch wireless RF Remote Control Switch Transmitter(with battery)
1X Receiver
8. DROK Self-Lock Wireless Relay Garage Door Remote Control 12V DC 1 Channel Switching Board
Feature
Operating Voltage: 12V; working frequency: 315MHzControl channel: 1 channel
Operating mode: self-lock
Supporting remote control: 150 ~ 200 M (open place) one-button remote control
12V remote control switches, recommended over 500mA DC power supply
Description
Self-locking type:Output data to achieve the trigger flip state. Successfully received the data can have been
Maintain the state of the corresponding level. Remote data changes until the next time change.
Each self-locking independent of each other, can remote control multi-channel, such as lighting control.
The remote control for anti-theft alarm, remote control electric windows, signal control, industrial control, lifting equipment, Electrical control circuit, etc.
Remote control switch module relay contact Independent output, Very suitable for direct control of various types of load; Wireless remote control with fixed code coding technology, No direction, switches without disturbing each other.
Each Receiver can withstand 10A maximum current, Direct drive AC loads, each with a set of relays are normally open (normally closed) contacts. To extend the life of Receiver is not recommended to control the power load, the proposed control of power per channel at 1000W (resistive load); 600W (inductive load); 400W (motor load) below.
Receiver parameters:
Contact capacity: < / = 10A/250VAC; 10A/30VDC
Receiver sensitivity:>-105dB
Control approach: two normally open (normally closed) contacts
Encoding type: fixed code; pad code
Module size: 39 * 40 * 20mm
Shock resistance: 270K
Remote control parameters:
Operating Current: < / = 10mA
Encoding type: fixed code; pad code
Dimensions: 58 * 39 * 14mm
Oscillation resistance: 1.5M
Package includes:
1x Receiver Board
1x Remote Controller
9. eMylo DC 12V Wireless Remote Control Momentary Light Switch 16CH 433Mhz RF Relay Receiver with Transmitter
Feature
The product adopts RF technology, with long remote control distance and stable signal.The receiving module provides high signal sensitivity at lower cost and resist interference for excellent stability.
It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
The programmable transmitter and receivers can be flexibly configured in quantity and in operating modes.
It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
Description
TransmitterOperating Voltage: 12V
Operating Frequency: 433Mhz
Vibration Resistance: 4.7M
Chip Type: 2264
Modulation: ASK (Stable, less interference)
Encode Type: Welding code
Battery Type: 12V 23A(not included)
Remote Distance: 150m (Theoretical value)
Ambient TEMP: -30 -70, Humidity<95%
Product DIM: 120x50x18mm
Receiver
Input Voltage: DC 12V
Operating Frequency: 433Mhz
Coding Way: Intelligent Learning
Output Type: Passive output(12V)
Max load: 7A
Ambient TEMP: -20 -65, Humidity<95%
Factory Default: Inching
Board DIM: 115x73x17mm
Case DIM: 122x80x28mm
Package Includes:
2X Transmitters (Battery is not included)
1X Receiver
1X English Manual
Notice:
All remote control switch kits support 433mhz frequency, and no interference each other, if you buy many kit and hope for interference, please contact us when you place order.
10. DC 3.7V 5V 12V 24V 1A Mini Wireless Remote Control Switch ON OFF Kit Momentary 433mHz Low Voltage Load Controller Power Button Wide Voltage Range With Mini Compact Receiver 3.7 Volt 6 Volt 12 24 Volt
Feature
PERFECT COMPACT DESIGN FOR ANY 3.7V 5V 6V 9V 12V 24V DEVICE OR LIGHT - 1A capacity to handle up to 10W (-20% Safety Margin)ELIMINATE THE TROUBLE OF MESSY WIRING AND TIME CONSUMING WORK - Save yourself time and money by using a wireless remote to switch on your load from a distance
WORKS UP TO 200 FEET ON LEVEL SURFACES -- Momentary function --- Load turns on once button is depressed --- Release the button --- Load turns off
2 YEAR WARRANTY Plus 30 Day Money Back Guarantee - Let 12Vmonster's remote control wireless kit simplify your low voltage system
A Small and Compact Wireless Remote Control Kit For Your Small Loads (Under 10W) Momentary Function Switch - Depress For On, Release For Off
Description
Looking for a simple way to turn on your low voltage load ?
Or a better way to manage all those messy low voltage wiring ? Introducing the 2 channel dual load wireless remote control kit from 12Vmonster. Whether you want to install a kill switch for your car, or simply turn on some low voltage outdoor lighting, the 12Vmonster wireless kit will transform your system into a wireless and easy to use solution. Simplify your low-voltage project and forget about the messy wiring. A simple relay that is easy to install and looks super cool. All of 12Vmonster's remote controls are powered by a robust wireless digital identification technology. Each unit has its own independent and unique frequency so no units would ever interfere with each other. 62MM X 30MM X 12MM is the size for the black remote button unit 25mm x 11mm x 8mm for the mini pig tail receiver unit
