If you looking for woodworking ruler then you are right place. We are searching for the best woodworking ruler on the market and analyze these products to provide you the best choice.
Reviews
1. eBoot Stainless Steel Ruler Metal Ruler with Conversion Table, 15 Inch, 12 Inch and 6 Inch
Feature
3 Different measurement range ruler: marked measuring length is 15 inch, 12 inch, and 6 inch, suitable for different measuring jobsNon-bendable steel ruler: office ruler is made of durable stainless steel non-bendable but a little flexible, good for long lasting use; The markings are recessed a bit into the metal, so they will not rub off over time
Conversion table for quick calculate: there is a conversion table on the back to help you calculate the measurements in other units; Measurement markings begin at the edge of the rule, convenient to use
Universal ruler with hole: the surface of the rulers are smooth with no burr; One end is square, the other is rounded with a hole to make it easy for hanging
Note: the ruler with a squared off angles, attention should be paid to avoid scratches to your hand
Description
eBoot Stainless Steel Ruler Metal Ruler with Conversion Table, 15 Inch, 12 Inch and 6 Inch
Features:
A hole easy to hang and carry:
The hole on the half round end allow you to hang it to the peg board directly, it would be nice to put decimal equivalents for common sizes.
Long time use:
Made of durable stainless steel, great material for your long time use; Office ruler are engraved with markings so that they will not rub off over time.
Metric/ inch:
Conversion table on the back is convenient to convert inch into millimetre, being a good helper for conversion between inch with metric.
Applications:
Stainless steel rulers in different lengths are handy for a variety of applications, use them for office, school, drawing, engineering and other tasks.
Specifications:
Material: stainless steel
Thickness: 0.035 inch/ 0.9 mm
Package includes:
1 x Stainless steel ruler (15 inch)
1 x Stainless steel ruler (12 inch)
1 x Stainless steel ruler (6 inch)
2. Gimars 3 Pcs Nonslip Unique Measure on Both Ends Design 6 +12 inch Stainless Steel Metal Rulers Kit, Easy Read with Inch&mm&cm, Round&Straight Edge for School, Office, Architect, Engineers, Craft
Feature
Inch & cm marking exactly on the ends - Unique Design, Measurement can begin at Zero and scale at end for rule(others from 1/8th inch in on each side), you can makes measuring directly and into any corners;Stainless Steel &Round Safety Edge & Straight Edge- Made of High quality stainless steel for long time use.Round Edge design is not sharp and safety for you and your children; Straight Edge professional for engineers;
Grinding & Polishing & Thicker Side - More grinding and polishing process than other suppliers to ensure the inside edges is not sharp, much more safety to you and your kids. Thick thickness is not easy to bend;
Great Value - Sold as 3 Pack, 2 pack 12 inch(one with round edge, the other one with straight edge), 1 pack 6 inch with hanging hole, you can hang it anywhere and you can put your 6 inch ruler on your box;
Risk Free Purchase - 100% Satisfaction Money Back Guarantee. Click on the 'add to cart', NOW!
Description
Stainless Steel Ruler3. Swanson SVE480 48-Inch Savage Straight Edge, Non-marring, Anodised and Laser-Etched Scale
Feature
No Slip Grip BackingThumb SaverRaised Edge
AnodizedAerospace Aluminum
Precision Laser Etching
Scale: Standard
Description
A simple tool with sophisticated details; features: no slip grip backing, thumb saver raised edge, anodized aerospace aluminum; precision laser etching; scale: standard.4. eBoot Stainless Steel Ruler 12 Inch and 6 Inch Metal Rule Kit with Conversion Table
Feature
The set includes 1 piece 12 inch (300 mm) ruler and 1 piece 6 inch (150mm) rulerMetric and Imperial Graduation; With conversion table on the back side
Clear marks for your convenient measurement
Stainless steel material for your long lasting use
0.9 mm thickness avoid sharp edges
Description
Features:Steel rule set, including a 12 Inch and a 6 Inch rule.
Various usage, suitable for students, engineers and craftman.
Conversion table on the back side, which can help you converse metric to imperial quickly.
2 different length can be applied in different environment.
Package with 2 rulers of 12 inch (300 mm) and 6 inch (150 mm)
Specification:
Length: 12 inch (30 cm), 6 inch (15 cm)
Material: Stainless steel
Thickness of each ruler: 0.9 mm/ 0.03 inch
Conversion table: converse metric to imperial quickly
Package included:
1 x 12 inch ruler
1 x 6 inch ruler
5. Woodpeckers Precision Woodworking Tools WWR12 Woodworking Rule, 12-Inch
Feature
Blade machined from aircraft-grade aluminum and anodized for surface protection and appearancePrecise laser engraved markings, 1/16-inch graduations
Markings engraved on a 30 degree bevel for easy alignment to pencil marks
Finger groove down center to help position the rule into place
Sits flat because of a recess down center of bottom surface
Description
What makes our Woodworking Rule better than your average yardstick? First, its much more accurate with precise laser engraved markings. Second, its straighter and heavier. Third, it sits flat because of a recess down the center of the bottom surface. Fourth, it has both a standard and a center scale. Fifth, the markings are engraved on a 30 degree bevel for easy alignment to pencil marks. And finally, it looks nicer. When you look at all the different rules being sold in retail stores, they're all pretty much intended for framing houses or general purpose use without any thought on how to make them better for those of us who build furniture and cabinets. Tape measures are great if your building a shed. They're not dependably accurate enough for finished furniture parts. Tape measures also don't make good straight edges to draw lines with.6. DCT Centering Ruler, 24 Inch Center Finding Measurer for Woodworking Rotary, Crafting, Embroidery, Guitar Luthier
Feature
ONE-STEP CENTER MEASUREMENTS: Use the DCT Centering Ruler, 24" Inch - Center Finding Measurer for Woodworking Rotary, Crafting, Embroidery, Guitar Luthier to locate the exact center between any two points on items that are under 24 inches long; Having to do the math to find the center of projects and then cross-checking takes time and lots of brain power, but this ruler saves time and is effortless to use; It is a one-step deal and saves time especially when using salvaged lumberSAE STANDARD MEASUREMENTS: Graduated in 1/32-inch on top and 1/16-inch on bottom (32 NDS and 16 THS) which makes it easy to measure things when one end does not match up with the exact inch, 1/2-inch, or even 1/4-inch
ACCURATELY MEASURE: Readable on one side only with blind space at both ends so you can line up the first marking with the edge of your project for precise measurements
VARIOUS APPLICATIONS: Center any picture, sign lettering on a router, find the center line when building accurate guitars (luthiers), measure and center embroidery designs on fabric and shirts (easier than using pesky, small stickers!), or any other item that has a 2-foot or smaller width
BUILT TO LAST: Constructed from lightweight yet durable 24.5-inch x 1.75-inch (62.2cm x 4.4cm) stainless steel that is 1/25-inch (1mm) thick for maximum strength and longevity; All numbers and marked lines are permanently etched into the metal so you do not have to worry about them fading over time; 1/2-inch diameter hole on one end of ruler for conveniently hanging on your workshop pegboard when not in use
Description
Having to do extensive math to find the center of projects takes time and brain power, but the DCT Centering Ruler, 24" Inch - Center Finding Measurer for Woodworking Rotary, Crafting, Embroidery, Guitar Luthier saves time and is effortless to use. This ruler locates the exact center between any two points on items that are under 24 inches long. It is graduated in 1/32-inch on the top and 1/16-inch on the bottom (32 NDS and 16 THS) and includes blind space at both ends so you can line up the first marking with the edge of your project. It is constructed from stainless steel, and numbers and marked lines are permanently etched into the metal so you do not have to worry about them fading over time. Use the convenient hole on the end of the ruler to hang on your pegboard when not in use. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.7. Stainless Steel Center Finding Ruler. Ideal for Woodworking, Metal Work, Construction and Around The Home (24" Ruler)
Feature
When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time.The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see.
To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler.
The ruler is made 1mm thick stainless steel and flexes just the right amount for most any project while still remaining rigid enough so its not flopping all over when in use. Starting from "0" in the middle of the ruler, the scale is in 32nds.
The ruler may also be used as a standard type ruler with the 16th scale on the bottom side. This makes the center finder ruler even more versatile. The Center Finding Ruler is available in 12" and 24" sizes, which are both sold separately.
Description
When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time. The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see. To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler. The ruler is made 1mm thick stainless steel and flexes just the right amount for most any project while still remaining rigid enough so its not flopping all over when in use. Starting from "0" in the middle of the ruler, the scale is in 32nds. The ruler may also be used as a standard type ruler with the 16th scale on the bottom side. This makes the center finder ruler even more versatile. The Center Finding Ruler is available in 12" and 24" sizes, which are both sold separately.8. Made in USA PEC 6" Rigid Stainless Steel 4R Machinist Engineer Ruler / Rule 1/64, 1/32, 1/8, 1/16
Feature
This rule is made in the USA by Products Engineering Company (PEC Tools), a premier US tool manufacturer.It is made from the finest stainless steel available and is hardened and tempered.
It has a brushed finish and is precision photo etched and then black filled for easy readability.
The 4R graduation shows 32nds and 64ths on one side and 8ths and 16ths on the reverse.
Rule is .750" wide and .035" thick.Both long edges are ground flat and straight.
Description
Size 6" Width 3/4" Graduation 4R - 8ths, 16ths, 32nds, 64ths Thickness .040"9. Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool
Feature
From the manufacturer: The Kreg Multi-Mark is an incredibly handy multi-purpose markingThe Multi-Mark features three different scale configurations, a built-in level, a handy 3/16" reveal gauge
Item is manufactured in United States
Wide variety of measuring and marking functions
3 Unique scale positions
3/16-Inch offset for door trim
Cumulative scale for transferring measurements
Perfect for general layout
Description
The Kreg multi-mark is an incredibly handy multi-purpose marking and measuring tool, perfect for a wide variety of household and jobsite applications. The multi-mark features three different scale configurations, a built-in level, a handy 3/16-Inch reveal gauge. With this tool you can layout mitered corners, set 3/16-Inch reveals, transfer measurements , align/square your projects, set bit/blade heights , layout wall studs, use as a basic rule, marking for layout and use as a simple level.Dimensions: 0 x 0 x 0.
10. Multi Angle Measuring Ruler, Ankace Premium Aluminum Alloy Ultimate 836 Template Tool/Layout Tool Measurement for Handymen, Builders, Craftsmen, DIY-ers, Black
Feature
Multiple applications, maxform easy angle ruler can create specialized angles/shapes for tile, brick, stone, wood, laminate, and moreEasy to use and increase efficient, the ultimate 836 angleizer can measure any desired angle or shape accurately by tightening or loosening the screw
Portable and easy to store, comes with protective bag, the measuring ruler can be better protected from scratch
Premium aluminum alloy material, this multi angle measuring ruler is more durable and sturdy than the plastic one, locks tight, yet releases easily
Description
Professional Template Tool Practical Multi-Angle Angularizer Ruler Metal/Layout ToolThe Universal Angularizer Ruler is a handy personal and professional device for creating specialized shapes in tile, wood, brick and countertops. Four adjustable sides rulers can slide and lock into any position or angle as a customized stencil quickly and easily. Whether you're a professional builder, craftsman, weekend warrior or DIYer, the universal angulizer ruler metal is an essential tool for any toolbox!
Features
-Accurate Angle Measurement Tool: Perfect for precise and accurate angle measurements.
-High Quality Aluminum Alloy Material: Durability and resistant to scratch, corrode etc.
-IN & CM Angles measurements: All arms are dual-calibrated in inches and metric measures.
-High-efficiency: You can save more time because angle ruler can be set-up in seconds.
-Multifunctional Ruler: Can be set to mark bricks, tiles, lumber and laminates. Perfect for builders, craftsmen, weekend warriors and DIY-ers.
-Portable and Ergonomic: Unique tightening mechanism for one-handed operations.
Specification
Material: Premium Aluminum Alloy
Color: Black
Product Weight:0.32 lbs
Open size:12*6.9*0.7 inches
Fold size:12*2*0.7 inches
Package Included
1x Template Tool
1x Hard Paperboard Box
1x Storage Bag
