How to buy the best wemos d1 mini pro?

We spent many hours on research to finding wemos d1 mini pro, reading product features, product specifications for this guide. For those of you who wish to the best wemos d1 mini pro, you should not miss this article. wemos d1 mini pro coming in a variety of types but also different price range. The following is the top 10 wemos d1 mini pro by our suggestions:

Product Features Editor's score Go to site
IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WIFI Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 5) IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WIFI Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 5)
Go to amazon.com
HiLetgo 2pcs Wemos D1 Mini Development Board ESP8285 V1.0.0 1MB Flash Lite Wireless WiFi Internet Development Board Wemos D1 Mini ESP8285 HiLetgo 2pcs Wemos D1 Mini Development Board ESP8285 V1.0.0 1MB Flash Lite Wireless WiFi Internet Development Board Wemos D1 Mini ESP8285
Go to amazon.com
AEEDAIRY 2pcs/lot WEMOS D1 mini Pro-16 +esp8266 series wifi wireless antenna AEEDAIRY 2pcs/lot WEMOS D1 mini Pro-16 +esp8266 series wifi wireless antenna
Go to amazon.com
Mayata 2pcs/lot WEMOS D1 mini Pro-16 +esp8266 series wifi wireless antenna Mayata 2pcs/lot WEMOS D1 mini Pro-16 +esp8266 series wifi wireless antenna
Go to amazon.com
Makerfocus D1 Mini NodeMcu 4M Bytes Lua WiFi Development Board Base on ESP8266 ESP-12F N Compatible NodeMcu Arduino Makerfocus D1 Mini NodeMcu 4M Bytes Lua WiFi Development Board Base on ESP8266 ESP-12F N Compatible NodeMcu Arduino
Go to amazon.com
Makerfocus 2pcs ESP8266 Module ESP-12E NodeMcu LUA WiFi Internet New Version Development Board Makerfocus 2pcs ESP8266 Module ESP-12E NodeMcu LUA WiFi Internet New Version Development Board
Go to amazon.com
Diymall 2.4G WiFi Antenna with SMA Cable 3DBI Gain Antennas U.FL to for Arduino CC3000 ESP8266 ESP32 ESP-072pcs Diymall 2.4G WiFi Antenna with SMA Cable 3DBI Gain Antennas U.FL to for Arduino CC3000 ESP8266 ESP32 ESP-072pcs
Go to amazon.com
RobotDyn - DHT22 - Temperature and Humidity sensor Shield for WeMos D1 mini / PRO, with pin-headers set. RobotDyn - DHT22 - Temperature and Humidity sensor Shield for WeMos D1 mini / PRO, with pin-headers set.
Go to amazon.com
ESP8266 WiFi Color Display Kit ESP8266 WiFi Color Display Kit
Go to amazon.com
IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 3) IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 3)
Go to amazon.com
Related posts:

Reviews

1. IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WIFI Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 5)

Feature

This D1 mini module is a mini WIFI board based on ESP-8266EX.
This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection.
Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE.

Description

"Just Choose IZOKEE: Your expert for Micro-Electronics! One-Stop-Shopping with Various Electronic Modules & Components! "

IZOKEE D1 Mini NodeMcu Lua WLAN WIFI Internet Development Board

Product Specification:
Main Chip: ESP8266 CH340G.
WIFI Development Board, 4M bytes.
supported (except D0).
Support OTA on line.
1 Micro USB connection.
1 analog input (3.3V max input).
5V 1A switching power supply onboard.
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection.

How to get it started in Arduino:
- Setup driver
Before you use mini D1 boards, you need set up CH340g driver.
- Python
On Windows you need install Python 2.7.10.
On Linux & MAC OSX, you don't need install it, comes preinstalled with OS.
- Installing Hardware package "Boards Manager or GIT".
We recommend using GIT, you can always get the latest version.

Package Includes:
5 x D1 Mini NodeMcu Lua WLAN WIFI Internet Development Board

2. HiLetgo 2pcs Wemos D1 Mini Development Board ESP8285 V1.0.0 1MB Flash Lite Wireless WiFi Internet Development Board Wemos D1 Mini ESP8285

Feature

This is a powerful Internet of things development board; standalone board mount, stackable on top, or stackable top and bottom.
Although these D1 Minis have only 16 pins, you're still getting 10 digital I/O and the one A0 analog pin, a reset pin, plus the ground and one 3 volt and one 5 volt pin. This is enough for most projects. After all, you do get the hardware I2C and SPI pins (on D5 through D8).
This D1 definitely fits on a standard breadboard leaving one open hole available for each pin (on both sides) but being shorter than the 30 pin boards you will have about 6 more rows available for prototyping, especially nice when using the short 460 tie point breadboards.
11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0); 1 analog input(3.2V max input). Micro USB connection; Compatible with Arduino; 1MB Flash; 500mA resettable fuse.
Be aware that the old driver can cause your machine to lock up. If you installed an earlier version of the driver (the one I had had no version number in the file name) search for instructions to remove it.

Description

Features:
11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0)
1 analog input(3.2V max input)
Micro USB connection; Compatible with Arduino
1MB Flash
500mA resettable fuse
A Micro USB connection
Board Size: 3.4x2.5cm/1.34x0.98inch.

Tips:
* For the pin layout, Google "Wemos mini NodeMcu". For example D5 is equivalent to GPIO 14.
* Solder properly. Use a LED to test if it will lit.
Pros:
* Smaller form than the standard NodeMcu
* 4Mb flash memory
* Solid build
* Usb power works
* Works well with Micropython firmware
* The Nodemcu/Lua firmware also works fine
Steps for usage:
* Download the Arduino IDE from the arduino.cc site at en/Main/Software.
* I found an OSX driver for the board at github.com on "adrianmihalko" 's page. You will want the files under the ch340g-ch34g-ch34x-mac-os-x-driver repository.
* Once both of these are installed open up the Arduino IDE.
* Go into the preferences and add the url as stated in the product description above (sorry can't post the url here).
* In the "Board Manager" search for and install the latest version of the "esp8266" generic module.
* Select the new "Port" added by the driver: (mine was "/dev/cu.wchusbserial14120").
* Set the "Reset Method" to: nodemcu.
* All done!

You'd better to write a simple "blink" sketch and upload it to your board to see it work.
The LED pin on this board is "2".

Package Including:
2* D1 Mini Development Board

3. AEEDAIRY 2pcs/lot WEMOS D1 mini Pro-16 +esp8266 series wifi wireless antenna

Description

2pcs/lot WEMOS D1 mini Pro-16 +esp8266 series wifi wireless antenna

4. Mayata 2pcs/lot WEMOS D1 mini Pro-16 +esp8266 series wifi wireless antenna

Description

2pcs/lot WEMOS D1 mini Pro-16 +esp8266 series wifi wireless antenna

5. Makerfocus D1 Mini NodeMcu 4M Bytes Lua WiFi Development Board Base on ESP8266 ESP-12F N Compatible NodeMcu Arduino

Feature

This is D1 mini, it is a mini WIFI board based on ESP-8266EX.
WIFI Development Board,4M bytes.
Arduino ompatibility. Using the Arduino IDE for programming
Support OTA on line
5V 1A switching power supply (switching power supplyonboard

Description

D1 Mini NodeMcu 4M Bytes Lua WIFI Development Board ESP8266 ESP-12F by WeMos

Description:

ESP8266,ESP-12F
WIFI Development Board
4M bytes
This is D1 mini, it is a mini WIFI board based on ESP-8266EX.
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire
supported(except D0)
1 analog input(3.3V max input)
1 Micro USB connection
How to get started in Arduino:
Setup driver:
1. Before you use miniD1 boards, you need setup CH340g driver.
Python:
2. On Windows you need install Python 2.7.10.
On Linux andamp; MAC OSX, you donandamp;39;t need install it, comes preinstalled with OS.
Installing Hardware package
3. There is two ways to install hardware package, Boards Manager or GIT
Installing with Boards Manager
4. Starting with 1.6.4, Arduino allows installation of third-party platform packages using
Boards Manager. We have packages available for Windows, Mac OS, and Linux (32 and 64 bit).
andlt;1andgt;. Install Arduino 1.6.7 from the Arduino website.
andlt;2andgt;. Start Arduino and open Preferences window. andlt;3andgt;.Enter http://arduino.esp8266.com/stable/package_esp8266com_index.json into Additional Boards Manager URLs field. You can add multiple URLs, separating them with commas.
andlt;4andgt;. Open ToolsBoard:xxxBoards Manager and install esp8266 by ESP8266 Community (and donandamp;39;t forget to select your ESP8266 board from Tools andgt; Board menu after installation).
Installing with GIT (Recommend):
5. We recommend using GIT to install Hardware package, you can always get the latest version of it.

Package Including
1 * D1 Mini NodeMcu 4M Bytes Lua WIFI Development Board

6. Makerfocus 2pcs ESP8266 Module ESP-12E NodeMcu LUA WiFi Internet New Version Development Board

Feature

The chip model: CP2102; There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is "-flash mode dio" https://github.com/espressif/esptool/wiki/SPI-Flash-Modes;
Firmware link: https://github.com/nodemcu/nodemcu-firmware; Data download access to the website: http://www.nodemcu.com; Test Video: https://www.youtube.com/watch?v=Gh_pgqjfeQc; Makerfocus nRF24L01+ and ESP8266 ESP-01 Breadboard Breakout Adapter Board is come for free, it can compatible with "nRF24L01+ " and ESP8266 ESP-01. If you need more information about it, pls refer to: https://www.amazon.com/dp/B01N5AK6E1;
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area;
We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking forward to your consultation!

Description

Instruction & Steps of How to use:
1. Download the Arduino IDE, the latest version.
2. Install the IDE
3. Set up your Arduino IDE as: Go to File->Preferences and copy the URL below to get the ESP board manager extensions: http://arduino.esp8266.com/stable/package_esp8266com_index.json Placing the http:// before the URL lets the Arduino IDE use it...otherwise it gives you a protocol error.
4. Go to Tools > Board > Board Manager> Type "esp8266" and download the Community esp8266 and install.
5. Set up your chip as:
Tools -> Board -> NodeMCU 1.0 (ESP-12E Module)
Tools -> Flash Size -> 4M (3M SPIFFS)
Tools -> CPU Frequency -> 80 Mhz
Tools -> Upload Speed -> 921600
Tools-->Port--> (whatever it is)
6. Download and run the 32 bit flasher exe at Github(Search for nodemcu/nodemcu-flasher/tree/master/ at Github) github.com/nodemcu/nodemcu-flasher/tree/master/Win32/Release Or download and run the 64 bit flasher exe at: github.com/nodemcu/nodemcu-flasher/tree/master/Win64/Release
7. In Arduino IDE, look for the old fashioned Blink program. Load, compile and upload.
8. Go to FILE> EXAMPLES> ESP8266> BLINK, it will start blinking.

Note: Please contact us if you need the driver or meet any issue when using. We provide 100% satisfication service for customers.

Package Including
2 * ESP8266 ESP-12E NodeMcu Development Board
1 * "nRF24L01+" and ESP8266 ESP-01 Breadboard Breakout Adapter Board(for free)

7. Diymall 2.4G WiFi Antenna with SMA Cable 3DBI Gain Antennas U.FL to for Arduino CC3000 ESP8266 ESP32 ESP-072pcs

Feature

Cable length:14cm
If you have a U.FL connector (the ity bity one) then use the cable, else the next most popular is the full size SMA connector in which case the 3DBI Antenna will screw on directly.
Extended range 3BI Adjustable WiFi Antenna with gold plated U.FL to Female SMA connection cable.
If you are looking for extended WiFi range from your ESP8266, CC3000 or other WiFi based projects then this Antenna package is what you need.
What You Get: 1 X 3DBI WiFi Antenna, 1 X U.FL to Female SMA Cable. Our 1 Year Worry-Free Warranty time and friendly customer service.

Description

WiFi Antenna with SMA Cable 3DBI Gain Antennas U.FL to for Arduino CC3000 ESP8266
Description:
Cable length:14cm
Extended range 3BI Adjustable WiFi Antenna with gold plated U.FL to Female SMA connection cable. If you are looking for extended WiFi range from your ESP8266, CC3000 or other WiFi based projects then this Antenna package is what you need.
If you have a U.FL connector (the ity bity one) then use the cable, else the next most popular is the full size SMA connector in which case the 3DBI Antenna will screw on directly.
Package Included:
1 X 3DBI WiFi Antenna
1 X U.FL to Female SMA Cable

8. RobotDyn - DHT22 - Temperature and Humidity sensor Shield for WeMos D1 mini / PRO, with pin-headers set.

Feature

Temperature and Humidity sensor Shield for WeMos D1 mini, with pin-headers set
DHT22- digital sensor for detecting the temperature and humidity in the environment.
Unlike his predecessor DHT11, it has a high level of measuring accuracy and can be used on the street
Also DHT22 have chip inside that can store the measurements and later transfer them to the controller

Description

DHT22- digital sensor for detecting the temperature and humidity in the environment.

Unlike his predecessor DHT11, it has a high level of measuring accuracy and can be used on the street.

Also DHT22 have chip inside that can store the measurements and later transfer them to the controller.

The only lack of this sensor is that the received data is delayed by 2 seconds.

Technical details:
Power supply: 3.3V.
Current: 2.5mA max use of current during conversion (while requesting data).
Humidity: 0 - 100%, 2%.
Temperature: -40C + 125C, 0.5%.
The sampling rate no more than 0.5 Hz (once every 2 seconds).

DHT22 - Temperature and Humidity sensor Shield for WeMos D1 mini, with pin-headers set:

Male Pin Header 1x8pins = 2 pcs
Female Pin Header -BLACK 1x8pins = 2 pcs
Stackable Header - BLACK 1x8pins = 2 pcs

Product official page:
https://robotdyn.com/wifi-d1-mini-t-h-sensor-shield-dht22.html
* For get a detail information of product, instruction, schematic diagram, dimension diagram, guide and software, Pls visit to official page of product.

RobotDyn(R) - registered trademark in USA.
Zhuhai RobotDyn Technology Co.,Ltd - Developer and manufacture.

9. ESP8266 WiFi Color Display Kit

Feature

Starter Kit for ESP8266/ Arduino
Content: Wemos D1 Mini Pro (16MB Flash), 2.4 ILI9341 Color Display TFT with Touch Interface XPT2046 (320200 Pixels), Custom Connector PCB to connect the ESP8266 and the TFT, USB Data Cable
Included Sample Applications: WeatherStation Color, 3D Cube , Spotify Remote Control, Plane Spotter

Description

First steps into the IoT world

The ESP8266 WiFi Color Display Kit by ThingPulse is a great way to get started with Internet of Things (IoT) and Arduino compatible micro controller programming.

The kit contains the following components:

  • WeMos D1 Mini Pro ESP8266 module, 16MB flash memory, integrated USB-to-Serial converter
  • ILI9341 based 320x240 65k color display, XPT2046 based resistive touch screen, SPI interface
  • PCB connector board to connect display and ESP8266 module
  • USB cable (USB-A to Micro-B)

Some soldering is required but a detailed step-by-step tutorial is available at https://docs.thingpulse.com/guides/wifi-color-display-kit/. To get an idea what assembly could look like there's a video at https://youtu.be/7fbGS4MjoMk.

New: Build a Spotify Remote!

We recently added a new project you can build with this kit: a Spotify Remote Control! Control Play, Pause, Next Song, Previous Song by using the touch screen. The ESP8266 downloads the album cover art of the current song and displays it with 16bit color on the TFT display. Watch this video to get an impression: https://www.youtube.com/watch?v=xKmXMUoo8ps

10. IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 3)

Feature

This D1 mini module is a mini WIFI board based on ESP-8266EX.
This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection.
Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE.

Description

"Just Choose IZOKEE: Your expert for Micro-Electronics! One-Stop-Shopping with Various Electronic Modules & Components! "

IZOKEE D1 Mini NodeMcu Lua WLAN WIFI Internet Development Board

Product Specification:
Main Chip: ESP8266 CH340G.
WIFI Development Board, 4M bytes.
supported (except D0).
Support OTA on line.
1 Micro USB connection.
1 analog input (3.3V max input).
5V 1A switching power supply onboard.
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection.

How to get it started in Arduino:
- Setup driver
Before you use mini D1 boards, you need set up CH340g driver.
- Python
On Windows you need install Python 2.7.10.
On Linux & MAC OSX, you don't need install it, comes preinstalled with OS.
- Installing Hardware package "Boards Manager or GIT".
We recommend using GIT, you can always get the latest version.

Package Includes:
3 x D1 Mini NodeMcu Lua WLAN WIFI Internet Development Board

Conclusion

All above are our suggestions for wemos d1 mini pro. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using wemos d1 mini pro with us by comment in this post. Thank you!