CDN DTQ450X Digital ProAccurate Instant-Read Thermometer-NSF Certified

Top recommendation for thermometer kitchen taylor

Feature

Pocket-sized quick-read thermometer that's great for measuring temp in thin cuts of meat, fish or poultry
5-inch stainless steel stem can get a reading in 6-8 seconds; stainless steel housing surrounding the digital readout
Large-digit readout, data-hold capabilities, 10-minute auto-off, plastic sheath with pen clip
Temperature range of -40 to 450 degrees F (-40 to 230 degrees C)
Powered by LR44 button battery (included); backed by 5-year limited warranty

Description

"Perfect for thin cuts of meat, fish or poultry. Easy To Use: 6 second response, Data-hold, Big digit, Temperature guide on sheath. Features: NSF Certified,1.5 mm thin tip, 5""/12.7 cm stem, Waterproof, Shatterproof, Food-safe ABS plastic with BioCote, Stainless steel stem, Field calibration, On/off button, Auto-off after 10 minutes, Sheath can be used as handle extension, Mounting: pocket clip, Battery and instructions included. Operating Instructions: A. Temperature Measurement 1. Press the ON/OFF button to turn the DTQ450X on. 2. After use, press the ON/OFF button to turn the DTQ450X off and conserve battery life. The DTQ450X automatically turns off after 10 minutes of inactivity. B. Temperature Scale Press the F/C button to select temperature reading in Fahrenheit or Celsius. C. Data-Hold Before withdrawing the DT450X from the food, press the HOLD button. This will hold the reading until pressed again. HOLD appears in the upper right corner of the display. D.Max Mode Max Mode is always working behind the scenes, continually storing the highest temperature. 1. Press the MAX button to display the highest temperature. MAX appears on the display. 2. The display automatically returns to the temperature mode after a few seconds. 3. Press the MAX button for 3 seconds or more to clear the stored MAX value. E. Self-Calibration 1. Place the stem into a mixture of 3 parts ice and 1 part water. 2. Press the CAL button for 2 seconds. The display will be blank for 2 seconds. Release the CAL button and 32.0F appears. Note: To avoid accidental recalibration, this function only works when the water temperature is 30 to 34F. ERR will appear for 2 seconds if the water is not within this range and then return to the temperature display mode."