Replacement HEPA Filters Side Brushes for iRobot Roomba 800&900 Series 860 870 871 880 894 861 864 870 980 960 961 964 Accessories with 4 Filter,Tangle-Free Debris Extractor Sedremm

Feature

The replacement kit is compatible with iRobot Roomba 800 900 Series 860 870 871 880 894 861 864 870 980 960 961 964.
High-Strength and environmental protection HEPA material, filter small dust and bacteria, reduce the secondary pollution of the air, bring fresh and refreshing breath of new feeling.
Professional iRobot Roomba Tangle-free debris extractor, discard traditional roller brush design, dual counter-rotating extractors incorporate a durable rubber tread design that grabs and breaks down dirt and debris from any floor type,cut off the hair, say goodbye to winding.
To keep your iRobot Roomba operating at peak performance, filters, debris extractors and side brushes should be replaced every 4 - 12 months. About 4 months, the white HEPA filter turned gray, even can not be cleaned, because the dust particles have been deep in the fiber, can not be removed by vacuum, air filter effect is reduced obviously.so it is time to replaced with a new filter.
iRobot Vacuum Parts-Include: HEPA filter x4 ,side brushx 6, tangle-free debris extractor x2 pairs , 1x Free Filter Brush,4x Free Screws

Description

If you don't regularly wash your filters, too much dust and rubbish will cut off the life of your vacuum . Will you spend more money on buying new Roomba vacuum ?

Sedremm 19 pcs excellent quality accessories for iRobot Roomba Vacuum ,keep your iRobot new.
***How to clean the Extractors:
1. Pinch the yellow extractor frame release tabs, lift up the extractor frame and remove any obstructions.
2.Remove the extractors and remove the yellow extractor caps.Remove any hair or debris that has collected underneath the caps and around the metal axles.
3. Remove hair and debris from the square and hex plastic pegs on the other side of the extractors.

***How to clean the Side Brushes:
To clean the side brush use the corner small screwdriver to remove the screws. then remove the brush,remove the hair or debris,and put the side brushes back in place.

***How to clean the Filters:
1.remove the bin by pressing the bin release button
2.open the bin door to empty the bin
3. now press and lift the filtered or release tab
4 .remove the filter by grasping the yellow tab
5.clean room was filter by tapping against your trash container
6.to reinstall the filter, press the metal filter lever,with the side of filter and push the filter down,the filter door will not close if the filter is not installed correctly

ATTENTION
the filter door will not close unless a filter is reinserted
if you notice roomba picking up less debris from your floor, emptythe bin,clean the filter and clean the extractors.
Do not attempt to run Roomba without the extractor caps.