Related posts

Feature

Designed specifically to reach the material inside a hollow form vessel that cannot be reached with straight shaft tools.
The Simple Swan Neck HollowerTM with Interchangeable handle can be used with our hollowing system.
With Simple Wood Turning Tools it's all turning and no sharpening so you can start turning immediately.
This is the tool of choice to clean out the material inside a hollow form vessel after as much material as possible is removed with straight shaft tools.
Both beginners and experts alike will appreciate how simple it is to complete hollow forms with this tool.

Description

To use the Simple Swan Neck HollowerTM with Handle follow these simple steps. 1. Position the tool rest so the curved portion of the tool will not contact the tool rest when the tool is inside the vessel. In other words the curved portion of the tool should be hanging over the tool rest. This positions the tool rest farther away from the vessel then would be normal with other tools. The reason for this is to prevent rotational, or twisting force on the tool as would be the case if the curved portion is in contact with the tool rest. Notice the center of the cutter is inline with the center of the straight portion of the tool. If the tool is positioned properly on the tool rest it will work just like straight shaft tools with no more twisting felt in the handle then when cutting with the side of a cutter on a straight shaft tool. However, since the tool is always extended over the tool rest we recommend only light cuts be made with this tool. Also this tool is designed for the final hollowing only and should not be used for the entire hollowing process. Straight shaft tool should be used for as much of the hollowing process as possible because the tool rest can be positioned close to the work with those tools. 2. Adjust the tool rest height so the cutter is at the lathe vertical center line. 3. Place the tool on the tool rest with the tool shaft parallel with the floor. 4. While securely holding the tool handle carefully move the tool into the vessel and carefully hollow out the portion that can not be reached with your straight shaft tools. Simple Swan Neck HollowerTM technical details: Carbide cutter - 9/16" diameter - Flat top cutter. Overall tool length - 12". Tool Shaft - Solid steel 1/2" square. Nickel plated. Handle tang - " diameter x 2" length. Interchangeable Handle details: Comfortable foam rubber grip handle over solid aluminum core. Overall length 17". Outside Diameter 1-3/8". Opening for tool 1/2" diameter.