Related posts

Feature

Alleviates the need for preformed gaskets
Remains liquid when exposed to air
Cures when confined between mating flanges
Prevents corrosion and galling of threads
Can fill gaps as large as 0.050

Description

Vibra-TITE 732 Gasket Maker is a smooth, thick purple paste. The anaerobic chemistry of this product creates a tough flexible formed-in-place gasket. Once confined between 2 components, 732 Gasket Maker provides an instant low pressure seal. Gasket Maker is used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, chainsaws, lawn mowers etc. This product can be used with or without pre-cut, pre-formed gaskets. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the tube. Fixture Speed with Activator is <15 minutes. Fixture Speed without Activator is 1 hour. Shelf Life is 12 months at 68 degree F. 24 hours at 68 degree F Full Cure Time. 500-2000 psi shear strength. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4 degree C. General purpose flexible gasket maker for rigid machined flanges. Unprimed 0.010 inches; Primed 0.020 inches Maximum gap fill. 1.1 Specific gravity. Unprimed 4-24 hours; Primed 30 minutes - 4 hours Cure Speed. N Suggested primer. 250 ml Tube.