1Set DIY 110V 2.2KW Water Cooled Spindle Motor CNC Spindle Motor 80MM + 13pcs ER20 Collet + 80MM Clamp + 2.2KW Converter + 5M Water Pipe + 110v Water Pump

Related posts

18 best er20 spindle motor for 2022

Feature

110V 2.2KW Water Cooled Spindle Motor, 2.2KW 110V Inverter, don't need any transformer, easy for you to use.
Runout off: less than 0.005mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
13PCS ER20 Collet Set Gripping Range:(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
Enjoy our 100% Money Back Guarantee. Your satisfaction is our top priority. If you have any problem, please contact us. So click Add to Cart and get one now.

Description

1. Spindle Motor:
Size: 80mm
Power: 2.2KW
Voltage: 110V
Frequency: 0-400Hz
Speed: 0-24000rpm
Water Cooling ER20 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Grease Lubrication
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground

2. Inverter:
Type: 2.2KW/110V
Input: 110VAC/50Hz
Output: 0-220VAC 3-phase
Frequency: 0-400Hz
Size: 168x124x161mm

3. ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")

4. Water Pump:
Voltage: 110V
Structure: Single-stage Pump
Pressure: High Pressure
Application: Submersible
Usage: Water

5. 5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor

6. Spindle Motor Clamp Mount:
Diameter: 80mm
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing

Package Included:
1 x 110V 2.2KW Spindle Motor
1 x 110V 2.2KW VFD
1 x 110V 75W Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)

How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one,
you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd.
Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.