Related posts
Feature
MCU embedded technology.Implementation on the industry standard voltage (0 ~ 5 v) converts the current that industry standards (0 ~ 10 mA, 4 ~ 20 mA).
Module working voltage: DC 10 v - 30 v.
Conversion range: 0-5 v voltage is converted to 0 to 20 mA current
The working voltage VCC &gnd, not reverse connection, in order to avoid damage to the board and components.
Description
WINGONEER trademark Reg.NO:4747611WINGONEER voltage turn current module 0-5V voltage turn to 0-20mA current
Summarize:
Voltage turn current module LC-V2A turn 0-5V voltage to 0-20mA current signal output, by adjusting the voltage to adjust the current .Module size is small, easy to apply in different places.
Functional Characteristics:
MCU embedded technology.
Implementation on the industry standard voltage (0 ~ 5 v) converts the current that industry standards (0 ~ 10 mA, 4 ~ 20 mA).
The drive ability MAX15MA, linear output
The output signal can be directly connected AD converter
Can be connected with the AD function with single chip microcomputer.
Easy to operate, can pass to fine-tuning potentiometer.
Convenient module is small, easy to carry and use.
Technical parameters:
Module working voltage: DC 10 v - 30 v.
Conversion range: 0-5 v voltage is converted to 0 to 20 mA current
Introductions:
VCC: work power 10 v - 30 v.
The power to GND: work.
VIN: 0-5 v input voltage.
GND: input voltage.
OUT: output current 0-20 mA.
GND: output.
Instructions:
The working voltage VCC &gnd, not reverse connection, in order to avoid damage to the board and components.
In access control voltage VIN end, the range is 0-5 v, on the output side there is the corresponding output current.
The corresponding relation of voltage and current can by adjusting the potentiometer to fine-tune the calibration.
Package included:
1x WINGONEER voltage turn current module 0-5V voltage turn to 0-20mA current