Stone Sealer A is a unique water based penetrating sealer which produces an invisible resistant barrier against oil and water stains. (8 fl. oz.)

Feature

safe and virtually odorless product that does not contain any toxic or dangerous solvents.
For protection of all natural stone, such as: marble, limestone, granite, Travertine, slate, sandstone as well as for manufactured stone, such as: concrete, brick, rock, saltillo, and quarry tile.
It also works great on grout joints.
For indoors and/or outdoors on hardscapes.
Powerful & Effective

Description

Stone Sealer A is a unique water based penetrating sealer which produces an invisible resistant barrier against oil and water stains. It is a safe and virtually odorless product that does not contain any toxic or dangerous solvents. For protection of all natural stone, such as: marble, limestone, granite, Travertine, slate, sandstone as well as for manufactured stone, such as: concrete, brick, rock, saltillo, and quarry tile. It also works great on grout joints. For indoors and/or outdoors on hardscapes. Preparation: Stone Surface should be clean, dry, and free of waxes or other surface coatings. New cement grout joints should be allowed to fully dry prior to application. Application: Apply sealer in an even and generous film onto the stone surface and grout joints using a TEKON Microfiber Mop or Microfiber Tek Pad. On Polished Stone: Allow to absorb and dry for 1 to 2 hours. Inspect surfaces and if a residue or film is visible, remove with water and TEKON Microfiber Mop or Microfiber Tek Pad. Some polished granites are very porous and require a second application. On Porous Stone: Very porous stone will usually absorb all the sealer with the first application and no residue cleaning is necessary. For best results, a second application should be applied one hour later. If the second application does not soak into the stone within ten minutes, wipe off excess.