Related posts

Feature

1. This APC Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.Low frequency,low Idle Current,remote control
2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing "0" in the battery type selector will disable charging function
3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input.
4. Auto Gen Startthe inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature.
5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)/Back feeding protection

Description

Features:

1.Low Frequency Pure Sine Inverter With Charger
2.AC/Battery Priority Selector
3.Automatically Generator Start
4.Safety and Convenient
5.Marine Coated and Protected
6.LCD Display, Remote Control
7.Low Idle Consumption
8.battery type settings for charger
9.Multi Stage Smart charger 60+/-5A, charger can be disable
10.10msec typical transfer time

Inverter Output:

Continuous Output Power: 6000 Watts
Surge Rating: 18000 Watts (20 Seconds)
Output: AC120V and AC 240V ,60HZ
AC Input:240V
Output Wave: Pure Sine Wave (bypass mode)
Typical Transfer Time: 10msMAX
Nominal Efficiency: >88%

DC Input:

Nominal Input Voltage: 48.0Vdc
Minimum Start Voltage: 40.0Vdc
Low Battery Alarm: 42.0Vdc-44.0Vdc
Low battery Trip: 40.0Vdc-42.0Vdc (select by SW1)
High Voltage Alarm: 64.0Vdc
Low battery Voltage Restart: 52Vdc
Idle Consumption: 48 Watts
Power Saver Mode Idle Consumption: 19.3 Watts

AC Charger Specifications:

Charger Rate: 60+/-5A
AC input RangeGrid or Generator: 140V-270VAC/184V-253VACselect by SW2
Over Charge Protection Shutdown:62.8V
Selectable Charge Setting based on battery type
Adjustable charge current: off-20%-100%
4-step intelligent battery charger

Package:

APC Low Frequency Pure Sine Inverter Charger
English Manual
Remote Control

Dimensions:

Unit Weight: 72lbs.
Unit Size L x W x H: 27.5x12.2x11.8inch
Shipping Weight: 79lbs
Shipping Size L x W x H : 30x13.3x12.9inch