Related posts

Feature

Match for Wolfwhoop Q3/Q3-S/Q3-Pro/Q3-Pro Micro
On-board Betaflight OSD,Integrated 5V/0.5A BEC,Integrated LC Filter
OMNIBUSF4 firmware, Dedicated PPM/ SBUS/IBUS receiver input
MPU6000 accelerometer/gyro (connected via SPI),Make flight more stable
This tightly integrated systems packs the FC, ESC, RX, VTX, PDB, CURRENT SENSOR and OSD into neatly stacked boards that can be easily serviced or upgraded

Description

Description:
The Flight Controller (FC) is a critical part of your drone and the faster the FC goes the better the response to your stick inputs.
The STM32F405 processor is the workhorse behind the FC which has ample memory and CPU power for even the most impressive fliers.
Included with this is the MPU600 sensor which combines a 3-axis gyroscope and a 3-axis accelerometer which will help keep you in the right place.
When FPV flying it helps to have easy access to flight data and the built-in OSD provides all the flight information straight to your video feed and onto your goggles or monitor screen.

Features:
STM32 F405 MCU for quick processing power
MPU6000 for gyro and accelerometer.
Firmware: betaflight_3.1.7_OMNIBUSF4
SBUS/IBUS/PPM input (Pinheaders)
Built-in Betaflight OSD: Flight Control Board IMU with Integrated OSD, support ground station Betaflight OSD parameter configuring;
support tunning PID with OSD by using remote controller; Transmitter power, frequency band/CH can be tuned with OSD based on the Betaflight.(Support FPV transmitter like Wolfwhoop Q1/Q3/Q1-Pro)

Specification:
Weight: 5.6gram
Size: 36x36mm, 30.5x30.5mm (hole)
PCB Thickness: 1.2MM
Built-in OSD
BEC: 5V/0.5A
Firmware: betaflight_3.1.7_OMNIBUSF4
SCM: STM32 F405 RGT6
Sensor: MPU6000
With LC filter
Receiver configuration: SBUS/PPM
Onboard memory capacity: 16MB

More information, please refer to:
https://github.com/betaflight/betaflight/releases
http://dronin.org/

Package included:
1 x F4 Flight Controller
1 x Cable
3 x Pin
N x screw