Related posts

Feature

OMNIBUS F4 Pro V2 has a more powerful STM32F405RGT6 MCU operating at a higher frequency, making everything run smoothly. You can add GPS and anything else you like freely because the CPU utilization is lower.
Integrates pneumatic module, SD card slot.Integrated current sensor to monitor the real-time power consumption.
Support upgrading 32K gyroscope and using the remote control to set the video transmitter.
Supports the input voltage of up to 6S LiPo battery.Comes with heat resistance damping ball to upgrade the stability and operation.
Use remote control to view flight control parameter through OSD / - Support SMART AUDIO, adjust the VTX by OSD.Enjoy FPV racing better and realize the full potential of your drone.

Description

F4 Pro V2 is a flight control board based on BetaFlight OMNIBUSF4SD firmware. While retaining the sensor comprising at OMNIBUSF4SD firmware (no current sensor, retention ADC interface) transmission module integrates a 800mW FIG. OSD mode configuration modification parameters (UART3 supports BetaFlight3.3.0 and above firmware). The image is clear and noise-free.

Specifications:
Brand: Rcharlance
Item Name: F4 Pro + V2

FC:
F4 (STM32F405) Processor
Gyroscope: MPU6000(Reserved external gyroscope interface)
Firmware: Betaflight OMNIBUS F4SD
Input Voltage: 2-6s lipo support
BEC Output: 5V 3A
Fimware: betaflihgt_3.2.0_OMNIBUSF4SD
Net Weight: 12g (not including cable)
Size: 36x36mm
Mounting Hole: 30.5x30.5mm

Receiver: Support PPM, SBUS, IBUS, DSM2/ DSMX Receiver (UART1)
Integrated with OSD, support BF Ground Station adjust OSD
Adjust the PID by OSD via remote control
Dshot support
Support SAMRT AUDIO, adjust the VTX by OSD (UART3)
MicroSD card blackbox
Baro(BMP280)

VTX:
Frequency: 5362-5945MHZ
Video Format: NTSC/PAL
Transmitting Power: 25/200/600/800mW switchable
Operating Voltage: DC 7V-24V
Output voltage: 5V /450mA
Working Current: 25mW: 240mA/ 200mW: 340mA/ 600mW: 520mA/ 800mW: 600mA
RemoteSoftwareprotocol: SmartAudio V2.0
Audio Bandwidth: 6.5MHZ
Video Bandwidth: 18MHZ
Channel: 40 CH
Range: Up to 4km omnidirectional RHCP antennas
Connector: MMCX

Package Included:
1x F4 Pro+ V2
1x MMCX to RP-SMA Female
4x cable